BIO_ctrl, BIO_callback_ctrl, BIO_ptr_ctrl, BIO_int_ctrl, BIO_reset, BIO_seek,
BIO_tell, BIO_flush, BIO_eof, BIO_set_close, BIO_get_close, BIO_pending,
BIO_wpending, BIO_ctrl_pending, BIO_ctrl_wpending, BIO_get_info_callback,
BIO_set_info_callback, BIO_info_cb, BIO_get_ktls_send, BIO_get_ktls_recv - BIO
control operations
#include <openssl/bio.h>
typedef int BIO_info_cb(BIO *b, int state, int res);
long BIO_ctrl(BIO *bp, int cmd, long larg, void *parg);
long BIO_callback_ctrl(BIO *b, int cmd, BIO_info_cb *cb);
void *BIO_ptr_ctrl(BIO *bp, int cmd, long larg);
long BIO_int_ctrl(BIO *bp, int cmd, long larg, int iarg);
int BIO_reset(BIO *b);
int BIO_seek(BIO *b, int ofs);
int BIO_tell(BIO *b);
int BIO_flush(BIO *b);
int BIO_eof(BIO *b);
int BIO_set_close(BIO *b, long flag);
int BIO_get_close(BIO *b);
int BIO_pending(BIO *b);
int BIO_wpending(BIO *b);
size_t BIO_ctrl_pending(BIO *b);
size_t BIO_ctrl_wpending(BIO *b);
int BIO_get_info_callback(BIO *b, BIO_info_cb **cbp);
int BIO_set_info_callback(BIO *b, BIO_info_cb *cb);
int BIO_get_ktls_send(BIO *b);
int BIO_get_ktls_recv(BIO *b);
BIO_ctrl(),
BIO_callback_ctrl(),
BIO_ptr_ctrl() and
BIO_int_ctrl() are BIO "control" operations taking arguments
of various types. These functions are not normally called directly, various
macros are used instead. The standard macros are described below, macros
specific to a particular type of BIO are described in the specific BIOs manual
page as well as any special features of the standard calls.
BIO_reset() typically resets a BIO to some initial state, in the case of
file related BIOs for example it rewinds the file pointer to the start of the
file.
BIO_seek() resets a file related BIO's (that is file descriptor and FILE
BIOs) file position pointer to
ofs bytes from start of file.
BIO_tell() returns the current file position of a file related BIO.
BIO_flush() normally writes out any internally buffered data, in some
cases it is used to signal EOF and that no more data will be written.
BIO_eof() returns 1 if the BIO has read EOF, the precise meaning of
"EOF" varies according to the BIO type.
BIO_set_close() sets the BIO
b close flag to
flag.
flag can take the value BIO_CLOSE or BIO_NOCLOSE. Typically BIO_CLOSE
is used in a source/sink BIO to indicate that the underlying I/O stream should
be closed when the BIO is freed.
BIO_get_close() returns the BIOs close flag.
BIO_pending(),
BIO_ctrl_pending(),
BIO_wpending() and
BIO_ctrl_wpending() return the number of pending characters in the BIOs
read and write buffers. Not all BIOs support these calls.
BIO_ctrl_pending() and
BIO_ctrl_wpending() return a size_t type
and are functions,
BIO_pending() and
BIO_wpending() are macros
which call
BIO_ctrl().
BIO_get_ktls_send() returns 1 if the BIO is using the Kernel TLS
data-path for sending. Otherwise, it returns zero.
BIO_get_ktls_recv()
returns 1 if the BIO is using the Kernel TLS data-path for receiving.
Otherwise, it returns zero.
BIO_reset() normally returns 1 for success and <=0 for failure. File
BIOs are an exception, they return 0 for success and -1 for failure.
BIO_seek() and
BIO_tell() both return the current file position on
success and -1 for failure, except file BIOs which for
BIO_seek()
always return 0 for success and -1 for failure.
BIO_flush() returns 1 for success and <=0 for failure.
BIO_eof() returns 1 if EOF has been reached, 0 if not, or negative values
for failure.
BIO_set_close() returns 1 on success or <=0 for failure.
BIO_get_close() returns the close flag value: BIO_CLOSE or BIO_NOCLOSE.
It also returns other negative values if an error occurs.
BIO_pending(),
BIO_ctrl_pending(),
BIO_wpending() and
BIO_ctrl_wpending() return the amount of pending data.
BIO_pending() and
BIO_wpending() return negative value or 0 on
error.
BIO_ctrl_pending() and
BIO_ctrl_wpending() return 0 on
error.
BIO_get_ktls_send() returns 1 if the BIO is using the Kernel TLS
data-path for sending. Otherwise, it returns zero.
BIO_get_ktls_recv()
returns 1 if the BIO is using the Kernel TLS data-path for receiving.
Otherwise, it returns zero.
BIO_flush(), because it can write data may return 0 or -1 indicating that
the call should be retried later in a similar manner to
BIO_write_ex().
The
BIO_should_retry() call should be used and appropriate action taken
is the call fails.
The return values of
BIO_pending() and
BIO_wpending() may not
reliably determine the amount of pending data in all cases. For example in the
case of a file BIO some data may be available in the FILE structures internal
buffers but it is not possible to determine this in a portably way. For other
types of BIO they may not be supported.
Filter BIOs if they do not internally handle a particular
BIO_ctrl()
operation usually pass the operation to the next BIO in the chain. This often
means there is no need to locate the required BIO for a particular operation,
it can be called on a chain and it will be automatically passed to the
relevant BIO. However, this can cause unexpected results: for example no
current filter BIOs implement
BIO_seek(), but this may still succeed if
the chain ends in a FILE or file descriptor BIO.
Source/sink BIOs return an 0 if they do not recognize the
BIO_ctrl()
operation.
Some of the return values are ambiguous and care should be taken. In particular
a return value of 0 can be returned if an operation is not supported, if an
error occurred, if EOF has not been reached and in the case of
BIO_seek() on a file BIO for a successful operation.
In older versions of OpenSSL the
BIO_ctrl_pending() and
BIO_ctrl_wpending() could return values greater than INT_MAX on error.
The
BIO_get_ktls_send() and
BIO_get_ktls_recv() macros were added
in OpenSSL 3.0. They were modified to never return -1 in OpenSSL 3.0.4.
Copyright 2000-2022 The OpenSSL Project Authors. All Rights Reserved.
Licensed under the Apache License 2.0 (the "License"). You may not use
this file except in compliance with the License. You can obtain a copy in the
file LICENSE in the source distribution or at
<
https://www.openssl.org/source/license.html>.