Config::Model::Cookbook::CreateModelFromDoc - Create a configuration model from
application documentation
version 2.152
This page shows step by step how was created "Popcon"'s model from
"Popcon" documentation provided as comments in "Popcon"'s
sample configuration file.
A quick looks in "/etc" directory shows that "Popcon"'s
configuration is stored in "/etc/popularity-contest.conf</t":
# Config file for Debian's popularity-contest package.
#
# To change this file, use:
# dpkg-reconfigure popularity-contest
#
# You can also edit it by hand, if you so choose.
#
# See /usr/share/popularity-contest/default.conf for more info
# on the options.
MY_HOSTID="172921501FFFFFAAAA6897etc"
PARTICIPATE="yes"
USEHTTP="yes"
DAY="5"
The important part is the mention of "default.conf" which contains all
the required information to create "Popcon"'s configuration model.
Let's start from "default.conf" file. Since this file is loaded by
"popcon"
before loading
"/etc/popularity-contest.conf</t", all values there can be used
as application default values (aka
upstream_default):
# Default config file for Debian's popularity-contest package.
#
# Local overrides are in /etc/popularity-contest.conf
# PARTICIPATE can be one of "yes" or "no".
# If you don't want to participate in the contest, say "no"
# and we won't send messages.
#
# If this option is missing, the default is "no".
#
PARTICIPATE="no"
# MAILTO specifies the address to e-mail statistics to each week.
#
MAILTO="[email protected]"
# MAILFROM is the forged sender email address you want to use in
# email submitted to the popularity-contest. If this is commented
# out, no From: or Sender: lines will be added to the outgoing mail,
# and it will be your MTA's job to add them. This is usually what
# you want.
#
# If your MTA is misconfigured or impossible to configure correctly,
# and it always generates invalid From: and/or Sender: lines, you
# can force different results by setting MAILFROM here. This can
# cause problems with spam bouncers, so most people should leave it
# commented out.
#
#MAILFROM="[email protected]"
# SUBMITURLS is a space separated list of where to submit
# popularity-contest reports using http.
SUBMITURLS="http://popcon.debian.org/cgi-bin/popcon.cgi"
# USEHTTP enables http reporting. Set this to 'yes' to enable it.
USEHTTP="yes"
# HTTP_PROXY allows one to specify an HTTP proxy server, the syntax is
# HTTP_PROXY="http://proxy:port". This overrides the environment
# variable http_proxy.
# MY_HOSTID is a secret number that the popularity-contest receiver
# uses to keep track of your submissions. Whenever you send in a
# new entry, it overwrites the last one that had the same HOSTID.
#
# This key was generated automatically so you should normally just
# leave it alone.
#
#MY_HOSTID="_ID_"
This file contains everything we need:
- •
- Parameter names
- •
- Documentation
- •
- Default values
Now, we will use our favorite editor to edit this file and add YAML tags that
can be understood by "cme meta edit"
"cme meta edit" is able to load a model described in YAML. To do this
the above file needs to be translated in YAML. That's not as complicated as it
may sound.
First, a YAML file must begin with
---. Then the class must be declared:
---
class:
PopCon:
Note that, like with Python language, the indentation is important to define the
structure of the file. Here, the "PopCon" class is followed by a ':'
as it defines a new hierarchical level to describes the configuration elements
of this class:
element:
Now we can deal with the configuration parameters. Let's detail the
"PARTICIPATE" element. Here's the spec in from
"default.conf":
# PARTICIPATE can be one of "yes" or "no".
# If you don't want to participate in the contest, say "no"
# and we won't send messages.
#
# If this option is missing, the default is "no".
#
PARTICIPATE="no"
In the YAML file, the comments are moved in the "description" field
and the value in the file is used as upstream default:
PARTICIPATE:
upstream_default: no
description: >
If you don't want to participate in the contest,
say "no" and we won't send messages.
Likewise for the remaining parameters:
MAILTO:
description: >
specifies the address to e-mail statistics to each week.
default: '[email protected]'
MAILFROM:
description: >-
MAILFROM is the forged sender email address you want to use
in email submitted to the popularity-contest. If this is
commented out, no From: or Sender: lines will be added to the
outgoing mail, and it will be your MTA's job to add them. This
is usually what you want.
If your MTA is misconfigured or
impossible to configure correctly, and it always generates
invalid From: and/or Sender: lines, you can force different
results by setting MAILFROM here. This can cause problems with
spam bouncers, so most people should leave it commented out.
In the description above, the "chimping" marker '-' after '>' is
used to keep paragraph formatting in the help.
SUBMITURLS:
description: >
Space separated list of where to submit popularity-contest
reports using http.
default: >
http://popcon.debian.org/cgi-bin/popcon.cgi
USEHTTP:
description: >
enables http reporting. Set this to 'yes' to enable it.
default: "yes"
HTTP_PROXY:
description: >
allows one to specify an HTTP proxy server, the syntax is
"http://proxy:port". This overrides the environment variable
http_proxy.
MY_HOSTID:
description: >-
secret number that the popularity-contest receiver uses to
keep track of your submissions. Whenever you send in a new
entry, it overwrites the last one that had the same HOSTID.
This key was generated automatically so you should normally
just leave it alone.
Now that the YAML file was created, you can turn it into a model and load it in
the model editor GUI with the following command:
cme meta edit popcon -load-yaml popcon.yml -force
Note that the model is incomplete: some mandatory parameters are missing from
the YAML file so the
-force option must be used. These missing
parameters are also flagged with a red cross in the GUI.
To complete the model, the easiest way is to run the wizard to complete the
missing values. In the GUI, you can use the menu "File -> wizard"
to launch the wizard. Then click on the 'OK' button in the new window.
The wizard will first stop on the parameter list (not because there's an error,
but because the parameter list is flagged as
important)
There, you can re-order the parameters by selecting one and clicking on one of
the blue arrows to move it up or down. Once you're satisfied, click on
Next.
The widget will now stop on the first missing information. Just select the
correct type ('leaf' here), click 'store' and 'Next'.
You can repeat these steps until the wizard exits.
Once the model is complete, it's time to specify how to read and write the file.
In "Popcon" class specification:
- •
- right-click on read_config
- •
- click on push new node to create a new read
specification
- •
- right-click on the created item (shown at index
"0")
You will get a window showing you the parameters to fill to specify the read
backend.
Now fill the blank on the right side. The backend to use is "ShellVar"
since
popularity-contest.conf is made of shell variables.
Since the write specification is identical, there's no need to specify it.
Config::Model will do the right thing.
You can test the model by clicking on menu "Test -> Model". You
will be shown the "Popcon" configuration editor GUI. The same that
your users will get.
If everything is fine, you can quit the model editor (menu File->quit)
The model you have just created is stored in
"lib/Config/Model/models/Popcon.pl".
You can test directly this model with :
cme edit -dev -try Popcon
Feel free to send comments and suggestion about this page to the author.
Dominique Dumont <ddumont at cpan.org>
Dominique Dumont
This software is Copyright (c) 2005-2022 by Dominique Dumont.
This is free software, licensed under:
The GNU Lesser General Public License, Version 2.1, February 1999