NAME
amoverview - display file systems processed by Amanda over timeSYNOPSIS
amoverview
[--hostwidth width] [--diskwidth width]
[--skipmissed] [--last] [--num0] [--togo0] [--verbose]
[--config ] config
DESCRIPTION
Amoverview displays a chart showing hosts and file systems processed by Amanda along with the backup level performed each day. See the amanda(8) man page for more details about Amanda.OPTIONS
--config configUse configuration config.
--hostwidth width
Set host field column width to
width characters instead of 8.
--diskwidth width
Set disk field column width to
width characters instead of 20.
--skipmissed
Compacts the output by only printing stats for
the days Amanda actually ran.
--last
Outputs the last status of each disk at the
start. Useful for long tapecycles and/or sparse reports.
--num0
Outputs the number of level 0 dumps for each
disk.
--togo0
Outputs the number of runs until the last
level 0 dump is overwritten.
--verbose
Amoverview can take a long while on
large systems. This option reports intermediate steps while it is
working.
RESULTS
amoverview is a summary of the output of " amadmin <config> find ". When the last column of amadmin find contains anything other than "OK", amoverview translates this into "E" for that day. A number indicates the level of backup and it succeeded. An "E" indicates an error for that day. You get an "E" for all errors, like failed to connect, datatimeout, computer crashed, etc, but also for failing to write to tape. You can have an "E" followed by a number if a filesystem ran into end-of-tape once (gives an "E", and later that day, you flush it to a second tape (a number: the level, indicating success). If the flush failed too, you get a double "EE" for that day. You can also have a double code if you have two tapes in the changer and Amanda failed to write to tape the first time because it hit end of tape (resulting in "E0", for a full, "E1" for an incremental etc.) or twice with error ("EE"), and may a successful flush afterwards giving maybe "EE0". (Only the latest 2 characters are printed).EXAMPLE
This shows the /home file system on host2 was backed up at level 3 on the 8th, 9th and 10th of December, had a full backup on the 11th, a level 1 on the 12th and a level 2 on the 13th.
# amoverview
date 12 12 12 12 12 12
host disk 08 09 10 11 12 13
host1 / 0 1 1 1 1 1
host1 /var 0 1 1 1 1 1
host2 / 1 1 1 1 1 0
host2 /home 3 3 3 0 1 2
host2 /opt 1 1 1 1 1 1
host2 /var 1 1 0 1 1 1
SEE ALSO
amanda(8), amadmin(8) The Amanda Wiki: : http://wiki.zmanda.com/AUTHOR
Stefan G. Weichinger <[email protected]>| 12/01/2017 | Amanda 3.5.1 |