ebook-convert - ebook-convert
ebook-convert input_file output_file [options]
Convert an e-book from one format to another.
input_file is the input and output_file is the output. Both must be specified as
the first two arguments to the command.
The output e-book format is guessed from the file extension of output_file.
output_file can also be of the special format .EXT where EXT is the output
file extension. In this case, the name of the output file is derived from the
name of the input file. Note that the filenames must not start with a hyphen.
Finally, if output_file has no extension, then it is treated as a folder and
an "open e-book" (OEB) consisting of HTML files is written to that
folder. These files are the files that would normally have been passed to the
output plugin.
After specifying the input and output file you can customize the conversion by
specifying various options. The available options depend on the input and
output file types. To get help on them specify the input and output file and
then use the -h option.
For full documentation of the conversion system see
E-book conversion
Whenever you pass arguments to
ebook-convert that have spaces in them,
enclose the arguments in quotation marks. For example: "/some path/with
spaces"
The options and default values for the options change depending on both the
input and output formats, so you should always check with:
ebook-convert myfile.input_format myfile.output_format -h
Below are the options that are common to all conversion, followed by the options
specific to every input and output format.
- •
- LOOK AND FEEL
- •
- HEURISTIC PROCESSING
- •
- SEARCH AND REPLACE
- •
- STRUCTURE DETECTION
- •
- TABLE OF CONTENTS
- •
- Metadato
- •
- DEBUG
- •
- AZW4 Input Options
- •
- CHM Input Options
- •
- Comic Input Options
- •
- DJVU Input Options
- •
- DOCX Input Options
- •
- EPUB Input Options
- •
- FB2 Input Options
- •
- HTLZ Input Options
- •
- HTML Input Options
- •
- LIT Input Options
- •
- LRF Input Options
- •
- MOBI Input Options
- •
- ODT Input Options
- •
- PDB Input Options
- •
- PDF Input Options
- •
- PML Input Options
- •
- RB Input Options
- •
- RTF Input Options
- •
- Recipe Input Options
- •
- SNB Input Options
- •
- TCR Input Options
- •
- TXT Input Options
- •
- AZW3 Output Options
- •
- DOCX Output Options
- •
- EPUB Output Options
- •
- FB2 Output Options
- •
- HTML Output Options
- •
- HTMLZ Output Options
- •
- LIT Output Options
- •
- LRF Output Options
- •
- MOBI Output Options
- •
- OEB Output Options
- •
- PDB Output Options
- •
- PDF Output Options
- •
- PML Output Options
- •
- RB Output Options
- •
- RTF Output Options
- •
- SNB Output Options
- •
- TCR Output Options
- •
- TXT Output Options
- •
- TXTZ Output Options
- --help, -h
- show this help message and exit
- --input-profile
- Specify the input profile. The input profile gives the
conversion system information on how to interpret various information in
the input document. For example resolution dependent lengths (i.e. lengths
in pixels). Choices are: cybookg3, cybook_opus, default, hanlinv3,
hanlinv5, illiad, irexdr1000, irexdr800, kindle, msreader, mobipocket,
nook, sony, sony300, sony900
- --list-recipes
- List builtin recipe names. You can create an e-book from a
builtin recipe like this: ebook-convert "Recipe
Name.recipe" output.epub
- --output-profile
- Specify the output profile. The output profile tells the
conversion system how to optimize the created document for the specified
device (such as by resizing images for the device screen size). In some
cases, an output profile can be used to optimize the output for a
particular device, but this is rarely necessary. Choices are:cybookg3,
cybook_opus, default, generic_eink, generic_eink_hd, generic_eink_large,
hanlinv3, hanlinv5, illiad, ipad, ipad3, irexdr1000, irexdr800, jetbook5,
kindle, kindle_dx, kindle_fire, kindle_oasis, kindle_pw, kindle_pw3,
kindle_scribe, kindle_voyage, kobo, msreader, mobipocket, nook,
nook_color, nook_hd_plus, pocketbook_inkpad3, pocketbook_lux,
pocketbook_hd, pocketbook_900, pocketbook_pro_912, galaxy, sony, sony300,
sony900, sony-landscape, sonyt3, tablet
- --version
- show program's version number and exit
Options to control the look and feel of the output
- --asciiize
- Transliterate Unicode characters to an ASCII
representation. Use with care because this will replace Unicode characters
with ASCII. For instance it will replace
"Pelé" with "Pele".
Also, note that in cases where there are multiple representations of a
character (characters shared by Chinese and Japanese for instance) the
representation based on the current calibre interface language will be
used.
- --base-font-size
- The base font size in pts. All font sizes in the produced
book will be rescaled based on this size. By choosing a larger size you
can make the fonts in the output bigger and vice versa. By default, when
the value is zero, the base font size is chosen based on the output
profile you chose.
- --change-justification
- Change text justification. A value of
"left" converts all justified text in the source
to left aligned (i.e. unjustified) text. A value of
"justify" converts all unjustified text to
justified. A value of "original" (the default)
does not change justification in the source file. Note that only some
output formats support justification.
- --disable-font-rescaling
- Disable all rescaling of font sizes.
- --embed-all-fonts
- Embed every font that is referenced in the input document
but not already embedded. This will search your system for the fonts, and
if found, they will be embedded. Embedding will only work if the format
you are converting to supports embedded fonts, such as EPUB, AZW3, DOCX or
PDF. Please ensure that you have the proper license for embedding the
fonts used in this document.
- --embed-font-family
- Embed the specified font family into the book. This
specifies the "base" font used for the book. If
the input document specifies its own fonts, they may override this base
font. You can use the filter style information option to remove fonts from
the input document. Note that font embedding only works with some output
formats, principally EPUB, AZW3 and DOCX.
- --expand-css
- By default, calibre will use the shorthand form for various
CSS properties such as margin, padding, border, etc. This option will
cause it to use the full expanded form instead. Note that CSS is always
expanded when generating EPUB files with the output profile set to one of
the Nook profiles as the Nook cannot handle shorthand CSS.
- --extra-css
- Either the path to a CSS stylesheet or raw CSS. This CSS
will be appended to the style rules from the source file, so it can be
used to override those rules.
- --filter-css
- A comma separated list of CSS properties that will be
removed from all CSS style rules. This is useful if the presence of some
style information prevents it from being overridden on your device. For
example: font-family,color,margin-left,margin-right
- --font-size-mapping
- Mapping from CSS font names to font sizes in pts. An
example setting is 12,12,14,16,18,20,22,24. These are the mappings for the
sizes xx-small to xx-large, with the final size being for huge fonts. The
font rescaling algorithm uses these sizes to intelligently rescale fonts.
The default is to use a mapping based on the output profile you
chose.
- --insert-blank-line
- Insert a blank line between paragraphs. Will not work if
the source file does not use paragraphs (<p> or <div>
tags).
- --insert-blank-line-size
- Set the height of the inserted blank lines (in em). The
height of the lines between paragraphs will be twice the value set
here.
- --keep-ligatures
- Preserve ligatures present in the input document. A
ligature is a special rendering of a pair of characters like ff, fi, fl et
cetera. Most readers do not have support for ligatures in their default
fonts, so they are unlikely to render correctly. By default, calibre will
turn a ligature into the corresponding pair of normal characters. This
option will preserve them instead.
- --line-height
- The line height in pts. Controls spacing between
consecutive lines of text. Only applies to elements that do not define
their own line height. In most cases, the minimum line height option is
more useful. By default no line height manipulation is performed.
- --linearize-tables
- Some badly designed documents use tables to control the
layout of text on the page. When converted these documents often have text
that runs off the page and other artifacts. This option will extract the
content from the tables and present it in a linear fashion.
- --margin-bottom
- Set the bottom margin in pts. Default is 5.0. Setting this
to less than zero will cause no margin to be set (the margin setting in
the original document will be preserved). Note: Page oriented formats such
as PDF and DOCX have their own margin settings that take precedence.
- --margin-left
- Set the left margin in pts. Default is 5.0. Setting this to
less than zero will cause no margin to be set (the margin setting in the
original document will be preserved). Note: Page oriented formats such as
PDF and DOCX have their own margin settings that take precedence.
- --margin-right
- Set the right margin in pts. Default is 5.0. Setting this
to less than zero will cause no margin to be set (the margin setting in
the original document will be preserved). Note: Page oriented formats such
as PDF and DOCX have their own margin settings that take precedence.
- --margin-top
- Set the top margin in pts. Default is 5.0. Setting this to
less than zero will cause no margin to be set (the margin setting in the
original document will be preserved). Note: Page oriented formats such as
PDF and DOCX have their own margin settings that take precedence.
- --minimum-line-height
- The minimum line height, as a percentage of the
element's calculated font size. calibre will ensure that every
element has a line height of at least this setting, irrespective of what
the input document specifies. Set to zero to disable. Default is 120%. Use
this setting in preference to the direct line height specification, unless
you know what you are doing. For example, you can achieve
"double spaced " text by setting this to 240.
- --remove-paragraph-spacing
- Remove spacing between paragraphs. Also sets an indent on
paragraphs of 1.5em. Spacing removal will not work if the source file does
not use paragraphs (<p> or <div> tags).
- --remove-paragraph-spacing-indent-size
- When calibre removes blank lines between paragraphs, it
automatically sets a paragraph indent, to ensure that paragraphs can be
easily distinguished. This option controls the width of that indent (in
em). If you set this value negative, then the indent specified in the
input document is used, that is, calibre does not change the
indentation.
- --subset-embedded-fonts
- Subset all embedded fonts. Every embedded font is reduced
to contain only the glyphs used in this document. This decreases the size
of the font files. Useful if you are embedding a particularly large font
with lots of unused glyphs.
- --transform-css-rules
- Path to a file containing rules to transform the CSS styles
in this book. The easiest way to create such a file is to use the wizard
for creating rules in the calibre GUI. Access it in the "Look
& feel->Transform styles " section of the conversion
dialog. Once you create the rules, you can use the
"Export" button to save them to a file.
- --transform-html-rules
- Path to a file containing rules to transform the HTML in
this book. The easiest way to create such a file is to use the wizard for
creating rules in the calibre GUI. Access it in the "Look
& feel->Transform HTML " section of the conversion
dialog. Once you create the rules, you can use the
"Export" button to save them to a file.
- --unsmarten-punctuation
- Convert fancy quotes, dashes and ellipsis to their plain
equivalents.
Modify the document text and structure using common patterns. Disabled by
default. Use --enable-heuristics to enable. Individual actions can be disabled
with the --disable-* options.
- --disable-dehyphenate
- Analyze hyphenated words throughout the document. The
document itself is used as a dictionary to determine whether hyphens
should be retained or removed.
- --disable-delete-blank-paragraphs
- Remove empty paragraphs from the document when they exist
between every other paragraph
- --disable-fix-indents
- Turn indentation created from multiple non-breaking space
entities into CSS indents.
- --disable-format-scene-breaks
- Left aligned scene break markers are center aligned.
Replace soft scene breaks that use multiple blank lines with horizontal
rules.
- --disable-italicize-common-cases
- Look for common words and patterns that denote italics and
italicize them.
- --disable-markup-chapter-headings
- Detect unformatted chapter headings and sub headings.
Change them to h2 and h3 tags. This setting will not create a TOC, but can
be used in conjunction with structure detection to create one.
- --disable-renumber-headings
- Looks for occurrences of sequential <h1> or
<h2> tags. The tags are renumbered to prevent splitting in the
middle of chapter headings.
- --disable-unwrap-lines
- Unwrap lines using punctuation and other formatting
clues.
- --enable-heuristics
- Enable heuristic processing. This option must be set for
any heuristic processing to take place.
- --html-unwrap-factor
- Scale used to determine the length at which a line should
be unwrapped. Valid values are a decimal between 0 and 1. The default is
0.4, just below the median line length. If only a few lines in the
document require unwrapping this value should be reduced
- --replace-scene-breaks
- Replace scene breaks with the specified text. By default,
the text from the input document is used.
Modify the document text and structure using user defined patterns.
- --search-replace
- Path to a file containing search and replace regular
expressions. The file must contain alternating lines of regular expression
followed by replacement pattern (which can be an empty line). The regular
expression must be in the Python regex syntax and the file must be UTF-8
encoded.
- --sr1-replace
- Replacement to replace the text found with sr1-search.
- --sr1-search
- Search pattern (regular expression) to be replaced with
sr1-replace.
- --sr2-replace
- Replacement to replace the text found with sr2-search.
- --sr2-search
- Search pattern (regular expression) to be replaced with
sr2-replace.
- --sr3-replace
- Replacement to replace the text found with sr3-search.
- --sr3-search
- Search pattern (regular expression) to be replaced with
sr3-replace.
Control auto-detection of document structure.
- --chapter
- An XPath expression to detect chapter titles. The default
is to consider <h1> or <h2> tags that contain the words
"chapter ", "book",
"section ", "prologue",
"epilogue" or "part" as
chapter titles as well as any tags that have class=
"chapter". The expression used must evaluate to a
list of elements. To disable chapter detection, use the expression
"/ ". See the XPath Tutorial in the calibre User
Manual for further help on using this feature.
- --chapter-mark
- Specify how to mark detected chapters. A value of
"pagebreak " will insert page breaks before
chapters. A value of "rule" will insert a line
before chapters. A value of "none" will disable
chapter marking and a value of "both" will use
both page breaks and lines to mark chapters.
- --disable-remove-fake-margins
- Some documents specify page margins by specifying a left
and right margin on each individual paragraph. calibre will try to detect
and remove these margins. Sometimes, this can cause the removal of margins
that should not have been removed. In this case you can disable the
removal.
- --insert-metadata
- Enigu librometadatumojn ĉe la teksto komencante
libron. Utilas se la bitlibra aparato ne permesas montri/serĉi
metadatumojn rekte.
- --page-breaks-before
- An XPath expression. Page breaks are inserted before the
specified elements. To disable use the expression: /
- --prefer-metadata-cover
- Use the cover detected from the source file in preference
to the specified cover.
- --remove-first-image
- Remove the first image from the input e-book. Useful if the
input document has a cover image that is not identified as a cover. In
this case, if you set a cover in calibre, the output document will end up
with two cover images if you do not specify this option.
- --start-reading-at
- An XPath expression to detect the location in the document
at which to start reading. Some e-book reading programs (most prominently
the Kindle) use this location as the position at which to open the book.
See the XPath tutorial in the calibre User Manual for further help using
this feature.
Control the automatic generation of a Table of Contents. By default, if the
source file has a Table of Contents, it will be used in preference to the
automatically generated one.
- --duplicate-links-in-toc
- When creating a TOC from links in the input document, allow
duplicate entries, i.e. allow more than one entry with the same text,
provided that they point to a different location.
- --level1-toc
- XPath expression that specifies all tags that should be
added to the Table of Contents at level one. If this is specified, it
takes precedence over other forms of auto-detection. See the XPath
Tutorial in the calibre User Manual for examples.
- --level2-toc
- XPath expression that specifies all tags that should be
added to the Table of Contents at level two. Each entry is added under the
previous level one entry. See the XPath Tutorial in the calibre User
Manual for examples.
- --level3-toc
- XPath expression that specifies all tags that should be
added to the Table of Contents at level three. Each entry is added under
the previous level two entry. See the XPath Tutorial in the calibre User
Manual for examples.
- --max-toc-links
- Maximum number of links to insert into the TOC. Set to 0 to
disable. Default is: 50. Links are only added to the TOC if less than the
threshold number of chapters were detected.
- --no-chapters-in-toc
- Don't add auto-detected chapters to the Table of
Contents.
- --toc-filter
- Remove entries from the Table of Contents whose titles
match the specified regular expression. Matching entries and all their
children are removed.
- --toc-threshold
- If fewer than this number of chapters is detected, then
links are added to the Table of Contents. Default: 6
- --use-auto-toc
- Normally, if the source file already has a Table of
Contents, it is used in preference to the auto-generated one. With this
option, the auto-generated one is always used.
Options to set metadata in the output
- --author-sort
- String to be used when sorting by author.
- --authors
- Set the authors. Multiple authors should be separated by
ampersands.
- --book-producer
- Set the book producer.
- --comments
- Set the e-book description.
- --cover
- Set the cover to the specified file or URL
- --isbn
- Set the ISBN of the book.
- --language
- Set the language.
- --pubdate
- Set the publication date (assumed to be in the local
timezone, unless the timezone is explicitly specified)
- --publisher
- Set the e-book publisher.
- --rating
- Set the rating. Should be a number between 1 and 5.
- --read-metadata-from-opf, --from-opf, -m
- Legi metadatumojn de la specifita OPF dosiero. Metadatumojn
legita el la OPF transpasos tiujn el la fonta dosiero.
- --series
- Set the series this e-book belongs to.
- --series-index
- Set the index of the book in this series.
- --tags
- Set the tags for the book. Should be a comma separated
list.
- --timestamp
- Set the book timestamp (no longer used anywhere)
- --title-sort
- The version of the title to be used for sorting.
Ebloj por helpi sencimigi la konvertilon
- --debug-pipeline, -d
- Save the output from different stages of the conversion
pipeline to the specified folder. Useful if you are unsure at which stage
of the conversion process a bug is occurring.
- --verbose, -v
- Level of verbosity. Specify multiple times for greater
verbosity. Specifying it twice will result in full verbosity, once medium
verbosity and zero times least verbosity.
- --input-encoding
- Indiku la signokodon de la enigata dokumento. Ĉi tiu
elekto estas prioritata al ajna signokodo indikita en la dokumento mem.
Aparte utila por dokumentoj sen indiko pri signokodo, aŭ kun erara
indiko.
- --input-encoding
- Indiku la signokodon de la enigata dokumento. Ĉi tiu
elekto estas prioritata al ajna signokodo indikita en la dokumento mem.
Aparte utila por dokumentoj sen indiko pri signokodo, aŭ kun erara
indiko.
- --colors
- Reduce the number of colors used in the image. This works
only if you choose the PNG output format. It is useful to reduce file
sizes. Set to zero to turn off. Maximum value is 256. It is off by
default.
- --comic-image-size
- Specify the image size as width x height pixels, for
example: 123x321. Normally, an image size is automatically calculated from
the output profile, this option overrides it.
- --despeckle
- Enable Despeckle. Reduces speckle noise. May greatly
increase processing time.
- --disable-trim
- Disable trimming of comic pages. For some comics, trimming
might remove content as well as borders.
- --dont-add-comic-pages-to-toc
- When converting a CBC do not add links to each page to the
TOC. Note this only applies if the TOC has more than one section
- --dont-grayscale
- Ne grizoskaligi (blankonigrigi) la imagon
- --dont-normalize
- Disable normalize (improve contrast) color range for
pictures. Default: False
- --dont-sharpen
- Disable sharpening.
- --input-encoding
- Indiku la signokodon de la enigata dokumento. Ĉi tiu
elekto estas prioritata al ajna signokodo indikita en la dokumento mem.
Aparte utila por dokumentoj sen indiko pri signokodo, aŭ kun erara
indiko.
- --keep-aspect-ratio
- Maintain picture aspect ratio. Default is to fill the
screen.
- --landscape
- Don't split landscape images into two portrait
images
- --no-process
- Apply no processing to the image
- --no-sort
- Don't sort the files found in the comic
alphabetically by name. Instead use the order they were added to the
comic.
- --output-format
- The format that images in the created e-book are converted
to. You can experiment to see which format gives you optimal size and look
on your device.
- --right2left
- Used for right-to-left publications like manga. Causes
landscape pages to be split into portrait pages from right to left.
- --wide
- Keep aspect ratio and scale image using screen height as
image width for viewing in landscape mode.
- --input-encoding
- Indiku la signokodon de la enigata dokumento. Ĉi tiu
elekto estas prioritata al ajna signokodo indikita en la dokumento mem.
Aparte utila por dokumentoj sen indiko pri signokodo, aŭ kun erara
indiko.
- --docx-inline-subsup
- Render superscripts and subscripts so that they do not
affect the line height
- --docx-no-cover
- Normally, if a large image is present at the start of the
document that looks like a cover, it will be removed from the document and
used as the cover for created e-book. This option turns off that
behavior.
- --docx-no-pagebreaks-between-notes
- Do not insert a page break after every endnote.
- --input-encoding
- Indiku la signokodon de la enigata dokumento. Ĉi tiu
elekto estas prioritata al ajna signokodo indikita en la dokumento mem.
Aparte utila por dokumentoj sen indiko pri signokodo, aŭ kun erara
indiko.
- --input-encoding
- Indiku la signokodon de la enigata dokumento. Ĉi tiu
elekto estas prioritata al ajna signokodo indikita en la dokumento mem.
Aparte utila por dokumentoj sen indiko pri signokodo, aŭ kun erara
indiko.
- --input-encoding
- Indiku la signokodon de la enigata dokumento. Ĉi tiu
elekto estas prioritata al ajna signokodo indikita en la dokumento mem.
Aparte utila por dokumentoj sen indiko pri signokodo, aŭ kun erara
indiko.
- --no-inline-fb2-toc
- Do not insert a Table of Contents at the beginning of the
book
- --input-encoding
- Indiku la signokodon de la enigata dokumento. Ĉi tiu
elekto estas prioritata al ajna signokodo indikita en la dokumento mem.
Aparte utila por dokumentoj sen indiko pri signokodo, aŭ kun erara
indiko.
- --breadth-first
- Traverse links in HTML files breadth first. Normally, they
are traversed depth first.
- --dont-package
- Normally this input plugin re-arranges all the input files
into a standard folder hierarchy. Only use this option if you know what
you are doing as it can result in various nasty side effects in the rest
of the conversion pipeline.
- --input-encoding
- Indiku la signokodon de la enigata dokumento. Ĉi tiu
elekto estas prioritata al ajna signokodo indikita en la dokumento mem.
Aparte utila por dokumentoj sen indiko pri signokodo, aŭ kun erara
indiko.
- --max-levels
- Maximum levels of recursion when following links in HTML
files. Must be non-negative. 0 implies that no links in the root HTML file
are followed. Default is 5.
- --input-encoding
- Indiku la signokodon de la enigata dokumento. Ĉi tiu
elekto estas prioritata al ajna signokodo indikita en la dokumento mem.
Aparte utila por dokumentoj sen indiko pri signokodo, aŭ kun erara
indiko.
- --input-encoding
- Indiku la signokodon de la enigata dokumento. Ĉi tiu
elekto estas prioritata al ajna signokodo indikita en la dokumento mem.
Aparte utila por dokumentoj sen indiko pri signokodo, aŭ kun erara
indiko.
- --input-encoding
- Indiku la signokodon de la enigata dokumento. Ĉi tiu
elekto estas prioritata al ajna signokodo indikita en la dokumento mem.
Aparte utila por dokumentoj sen indiko pri signokodo, aŭ kun erara
indiko.
- --input-encoding
- Indiku la signokodon de la enigata dokumento. Ĉi tiu
elekto estas prioritata al ajna signokodo indikita en la dokumento mem.
Aparte utila por dokumentoj sen indiko pri signokodo, aŭ kun erara
indiko.
- --input-encoding
- Indiku la signokodon de la enigata dokumento. Ĉi tiu
elekto estas prioritata al ajna signokodo indikita en la dokumento mem.
Aparte utila por dokumentoj sen indiko pri signokodo, aŭ kun erara
indiko.
- --input-encoding
- Indiku la signokodon de la enigata dokumento. Ĉi tiu
elekto estas prioritata al ajna signokodo indikita en la dokumento mem.
Aparte utila por dokumentoj sen indiko pri signokodo, aŭ kun erara
indiko.
- --new-pdf-engine
- Uzu la novan PDF-konvertilon. Ankoraŭ ne
funkcias.
- --no-images
- Do not extract images from the document
- --unwrap-factor
- Scale used to determine the length at which a line should
be unwrapped. Valid values are a decimal between 0 and 1. The default is
0.45, just below the median line length.
- --input-encoding
- Indiku la signokodon de la enigata dokumento. Ĉi tiu
elekto estas prioritata al ajna signokodo indikita en la dokumento mem.
Aparte utila por dokumentoj sen indiko pri signokodo, aŭ kun erara
indiko.
- --input-encoding
- Indiku la signokodon de la enigata dokumento. Ĉi tiu
elekto estas prioritata al ajna signokodo indikita en la dokumento mem.
Aparte utila por dokumentoj sen indiko pri signokodo, aŭ kun erara
indiko.
- --ignore-wmf
- Ignore WMF images instead of replacing them with a
placeholder image.
- --input-encoding
- Indiku la signokodon de la enigata dokumento. Ĉi tiu
elekto estas prioritata al ajna signokodo indikita en la dokumento mem.
Aparte utila por dokumentoj sen indiko pri signokodo, aŭ kun erara
indiko.
- --dont-download-recipe
- Do not download latest version of builtin recipes from the
calibre server
- --input-encoding
- Indiku la signokodon de la enigata dokumento. Ĉi tiu
elekto estas prioritata al ajna signokodo indikita en la dokumento mem.
Aparte utila por dokumentoj sen indiko pri signokodo, aŭ kun erara
indiko.
- --lrf
- Optimize fetching for subsequent conversion to LRF.
- --password
- Password for sites that require a login to access
content.
- --test
- Useful for recipe development. Forces max_articles_per_feed
to 2 and downloads at most 2 feeds. You can change the number of feeds and
articles by supplying optional arguments. For example: --test 3 1
will download at most 3 feeds and only 1 article per feed.
- --username
- Username for sites that require a login to access
content.
- --input-encoding
- Indiku la signokodon de la enigata dokumento. Ĉi tiu
elekto estas prioritata al ajna signokodo indikita en la dokumento mem.
Aparte utila por dokumentoj sen indiko pri signokodo, aŭ kun erara
indiko.
- --input-encoding
- Indiku la signokodon de la enigata dokumento. Ĉi tiu
elekto estas prioritata al ajna signokodo indikita en la dokumento mem.
Aparte utila por dokumentoj sen indiko pri signokodo, aŭ kun erara
indiko.
- --formatting-type
- Formatting used within the document. * auto: Automatically
decide which formatting processor to use * plain: No formatting *
heuristic: Use heuristics to determine chapter headings, italics, etc. *
textile: Use the TexTile markup language * markdown: Use the Markdown
markup language To learn more about markdown see
https://daringfireball.net/projects/markdown/
- --input-encoding
- Indiku la signokodon de la enigata dokumento. Ĉi tiu
elekto estas prioritata al ajna signokodo indikita en la dokumento mem.
Aparte utila por dokumentoj sen indiko pri signokodo, aŭ kun erara
indiko.
- --markdown-extensions
- Enable extensions to Markdown syntax. Extensions are
formatting that is not part of the standard Markdown format. The
extensions enabled by default: footnotes, tables, toc. To learn more about
Markdown extensions, see
https://python-markdown.github.io/extensions/ This should be a
comma separated list of extensions to enable: * abbr: Abbreviations *
admonition: Support admonitions * attr_list: Add attribute to HTML tags *
codehilite: Add code highlighting via Pygments * def_list: Definition
lists * extra: Enables various common extensions * fenced_code:
Alternative code block syntax * footnotes: Footnotes * legacy_attrs: Use
legacy element attributes * legacy_em: Use legacy underscore handling for
connected words * meta: Metadatumojn en la dokumento * nl2br: Treat
newlines as hard breaks * sane_lists: Do not allow mixing list types *
smarty: Use markdown 's internal smartypants parser * tables:
Support tables * toc: Generate a table of contents * wikilinks: Wiki style
links
- --paragraph-type
- Paragraph structure to assume. The value of
"off " is useful for formatted documents such as
Markdown or Textile. Choices are: * auto: Try to auto detect paragraph
type * block: Treat a blank line as a paragraph break * single: Assume
every line is a paragraph * print: Assume every line starting with 2+
spaces or a tab starts a paragraph * unformatted: Most lines have hard
line breaks, few/no blank lines or indents * off: Don 't modify the
paragraph structure
- --preserve-spaces
- Normally extra spaces are condensed into a single space.
With this option all spaces will be displayed.
- --txt-in-remove-indents
- Normally extra space at the beginning of lines is retained.
With this option they will be removed.
- --dont-compress
- Disable compression of the file contents.
- --extract-to
- Extract the contents of the generated AZW3 file to the
specified folder. The contents of the folder are first deleted, so be
careful.
- --mobi-toc-at-start
- When adding the Table of Contents to the book, add it at
the start of the book instead of the end. Not recommended.
- --no-inline-toc
- Don't add Table of Contents to the book. Useful if
the book has its own table of contents.
- --prefer-author-sort
- When present, use author sort field as author.
- --pretty-print
- Se elektita, la eliga kromprogramo provos krei rezulton
laŭeble legeblan por homaj okuloj. Eventuale ne influos iujn
eligajn kromprogramojn.
- --share-not-sync
- Ŝalti disdonado de libra enhavo per Facebook ktp per
la kindle. AVERTO: Uzi ĉi-funkcion signifas ke ne sinkronigas
librojn ĝis la lasta legita pozicio en pluraj aparatoj. Plendu al
Amazon.
- --toc-title
- Title for any generated in-line table of contents.
- --docx-custom-page-size
- Custom size of the document. Use the form width x height,
for example: 123x321 to specify the width and height (in pts). This
overrides any specified page-size.
- --docx-no-cover
- Do not insert the book cover as an image at the start of
the document. If you use this option, the book cover will be
discarded.
- --docx-no-toc
- Do not insert the table of contents as a page at the start
of the document.
- --docx-page-margin-bottom
- The size of the bottom page margin, in pts. Default is
72pt. Overrides the common bottom page margin setting, unless set to
zero.
- --docx-page-margin-left
- The size of the left page margin, in pts. Default is 72pt.
Overrides the common left page margin setting.
- --docx-page-margin-right
- The size of the right page margin, in pts. Default is 72pt.
Overrides the common right page margin setting, unless set to zero.
- --docx-page-margin-top
- The size of the top page margin, in pts. Default is 72pt.
Overrides the common top page margin setting, unless set to zero.
- --docx-page-size
- The size of the page. Default is letter. Choices are
['a0 ', 'a1', 'a2',
'a3', 'a4', 'a5',
'a6', 'b0', 'b1',
'b2', 'b3', 'b4',
'b5', 'b6', 'legal',
'letter ']
- --extract-to
- Extract the contents of the generated DOCX file to the
specified folder. The contents of the folder are first deleted, so be
careful.
- --preserve-cover-aspect-ratio
- Preserve the aspect ratio of the cover image instead of
stretching it out to cover the entire page.
- --pretty-print
- Se elektita, la eliga kromprogramo provos krei rezulton
laŭeble legeblan por homaj okuloj. Eventuale ne influos iujn
eligajn kromprogramojn.
- --dont-split-on-page-breaks
- Turn off splitting at page breaks. Normally, input files
are automatically split at every page break into two files. This gives an
output e-book that can be parsed faster and with less resources. However,
splitting is slow and if your source file contains a very large number of
page breaks, you should turn off splitting on page breaks.
- --epub-flatten
- This option is needed only if you intend to use the EPUB
with FBReaderJ. It will flatten the file system inside the EPUB, putting
all files into the top level.
- --epub-inline-toc
- Insert an inline Table of Contents that will appear as part
of the main book content.
- --epub-toc-at-end
- Put the inserted inline Table of Contents at the end of the
book instead of the start.
- --epub-version
- The version of the EPUB file to generate. EPUB 2 is the
most widely compatible, only use EPUB 3 if you know you actually need
it.
- --extract-to
- Extract the contents of the generated EPUB file to the
specified folder. The contents of the folder are first deleted, so be
careful.
- --flow-size
- Split all HTML files larger than this size (in KB). This is
necessary as most EPUB readers cannot handle large file sizes. The default
of 260KB is the size required for Adobe Digital Editions. Set to 0 to
disable size based splitting.
- --no-default-epub-cover
- Normally, if the input file has no cover and you
don't specify one, a default cover is generated with the title,
authors, etc. This option disables the generation of this cover.
- --no-svg-cover
- Do not use SVG for the book cover. Use this option if your
EPUB is going to be used on a device that does not support SVG, like the
iPhone or the JetBook Lite. Without this option, such devices will display
the cover as a blank page.
- --preserve-cover-aspect-ratio
- When using an SVG cover, this option will cause the cover
to scale to cover the available screen area, but still preserve its aspect
ratio (ratio of width to height). That means there may be white borders at
the sides or top and bottom of the image, but the image will never be
distorted. Without this option the image may be slightly distorted, but
there will be no borders.
- --pretty-print
- Se elektita, la eliga kromprogramo provos krei rezulton
laŭeble legeblan por homaj okuloj. Eventuale ne influos iujn
eligajn kromprogramojn.
- --toc-title
- Title for any generated in-line table of contents.
- --fb2-genre
- Genre for the book. Choices: sf_history, sf_action,
sf_epic, sf_heroic, sf_detective, sf_cyberpunk, sf_space, sf_social,
sf_horror, sf_humor, sf_fantasy, sf, det_classic, det_police, det_action,
det_irony, det_history, det_espionage, det_crime, det_political,
det_maniac, det_hard, thriller, detective, prose_classic, prose_history,
prose_contemporary, prose_counter, prose_rus_classic, prose_su_classics,
love_contemporary, love_history, love_detective, love_short, love_erotica,
adv_western, adv_history, adv_indian, adv_maritime, adv_geo, adv_animal,
adventure, child_tale, child_verse, child_prose, child_sf, child_det,
child_adv, child_education, children, poetry, dramaturgy, antique_ant,
antique_european, antique_russian, antique_east, antique_myths, antique,
sci_history, sci_psychology, sci_culture, sci_religion, sci_philosophy,
sci_politics, sci_business, sci_juris, sci_linguistic, sci_medicine,
sci_phys, sci_math, sci_chem, sci_biology, sci_tech, science, comp_www,
comp_programming, comp_hard, comp_soft, comp_db, comp_osnet, computers,
ref_encyc, ref_dict, ref_ref, ref_guide, reference, nonf_biography,
nonf_publicism, nonf_criticism, design, nonfiction, religion_rel,
religion_esoterics, religion_self, religion, humor_anecdote, humor_prose,
humor_verse, humor, home_cooking, home_pets, home_crafts, home_entertain,
home_health, home_garden, home_diy, home_sport, home_sex, home See:
http://www.fictionbook.org/index.php/Eng:FictionBook_2.1_genres for
a complete list with descriptions.
- --pretty-print
- Se elektita, la eliga kromprogramo provos krei rezulton
laŭeble legeblan por homaj okuloj. Eventuale ne influos iujn
eligajn kromprogramojn.
- --sectionize
- Specify how sections are created: * nothing: A single
section * files: Section per file * toc: Section per entry in the ToC If
ToC based generation fails, adjust the "Structure
detection" and/or "Table of Contents"
settings (turn on "Force use of auto-generated Table of
Contents ").
- --extract-to
- Extract the contents of the generated ZIP file to the
specified folder. WARNING: The contents of the folder will be
deleted.
- --pretty-print
- Se elektita, la eliga kromprogramo provos krei rezulton
laŭeble legeblan por homaj okuloj. Eventuale ne influos iujn
eligajn kromprogramojn.
- --template-css
- CSS file used for the output instead of the default
file
- --template-html
- Template used for the generation of the HTML contents of
the book instead of the default file
- --template-html-index
- Template used for generation of the HTML index file instead
of the default file
- --htmlz-class-style
- How to handle the CSS when using css-type =
'class'. Default is external. external: Use an external CSS
file inline: Use a <style> tag in the HTML file
- --htmlz-css-type
- Specify the handling of CSS. Default is class. class: Use
CSS classes inline: Use the style attribute tag: Use HTML tags wherever
possible
- --htmlz-title-filename
- If set this option causes the file name of the HTML file
inside the HTMLZ archive to be based on the book title.
- --pretty-print
- Se elektita, la eliga kromprogramo provos krei rezulton
laŭeble legeblan por homaj okuloj. Eventuale ne influos iujn
eligajn kromprogramojn.
- --pretty-print
- Se elektita, la eliga kromprogramo provos krei rezulton
laŭeble legeblan por homaj okuloj. Eventuale ne influos iujn
eligajn kromprogramojn.
- --enable-autorotation
- Enable auto-rotation of images that are wider than the
screen width.
- --header
- Add a header to all the pages with title and author.
- --header-format
- Set the format of the header. %a is replaced by the author
and %t by the title. Default is %t by %a
- --header-separation
- Add extra spacing below the header. Default is 0 pt.
- --minimum-indent
- Minimum paragraph indent (the indent of the first line of a
paragraph) in pts. Default: 0
- --mono-family
- The monospace family of fonts to embed
- --pretty-print
- Se elektita, la eliga kromprogramo provos krei rezulton
laŭeble legeblan por homaj okuloj. Eventuale ne influos iujn
eligajn kromprogramojn.
- --render-tables-as-images
- This option has no effect
- --sans-family
- The sans-serif family of fonts to embed
- --serif-family
- The serif family of fonts to embed
- --text-size-multiplier-for-rendered-tables
- Multiply the size of text in rendered tables by this
factor. Default is 1.0
- --wordspace
- Set the space between words in pts. Default is 2.5
- --dont-compress
- Disable compression of the file contents.
- --extract-to
- Extract the contents of the generated MOBI file to the
specified folder. The contents of the folder are first deleted, so be
careful.
- --mobi-file-type
- By default calibre generates MOBI files that contain the
old MOBI 6 format. This format is compatible with all devices. However, by
changing this setting, you can tell calibre to generate MOBI files that
contain both MOBI 6 and the new KF8 format, or only the new KF8 format.
KF8 has more features than MOBI 6, but only works with newer Kindles.
Allowed values: old, both, new
- --mobi-ignore-margins
- Ignore margins in the input document. If False, then the
MOBI output plugin will try to convert margins specified in the input
document, otherwise it will ignore them.
- --mobi-keep-original-images
- By default calibre converts all images to JPEG format in
the output MOBI file. This is for maximum compatibility as some older MOBI
viewers have problems with other image formats. This option tells calibre
not to do this. Useful if your document contains lots of GIF/PNG images
that become very large when converted to JPEG.
- --mobi-toc-at-start
- When adding the Table of Contents to the book, add it at
the start of the book instead of the end. Not recommended.
- --no-inline-toc
- Don't add Table of Contents to the book. Useful if
the book has its own table of contents.
- --personal-doc
- Tag for MOBI files to be marked as personal documents. This
option has no effect on the conversion. It is used only when sending MOBI
files to a device. If the file being sent has the specified tag, it will
be marked as a personal document when sent to the Kindle.
- --prefer-author-sort
- When present, use author sort field as author.
- --pretty-print
- Se elektita, la eliga kromprogramo provos krei rezulton
laŭeble legeblan por homaj okuloj. Eventuale ne influos iujn
eligajn kromprogramojn.
- --share-not-sync
- Ŝalti disdonado de libra enhavo per Facebook ktp per
la kindle. AVERTO: Uzi ĉi-funkcion signifas ke ne sinkronigas
librojn ĝis la lasta legita pozicio en pluraj aparatoj. Plendu al
Amazon.
- --toc-title
- Title for any generated in-line table of contents.
- --pretty-print
- Se elektita, la eliga kromprogramo provos krei rezulton
laŭeble legeblan por homaj okuloj. Eventuale ne influos iujn
eligajn kromprogramojn.
- --format, -f
- Format to use inside the PDB container. Choices are:
['doc ', 'ereader', 'ztxt']
- --inline-toc
- Add Table of Contents to beginning of the book.
- --pdb-output-encoding
- Specify the character encoding of the output document. The
default is cp1252. Note: This option is not honored by all formats.
- --pretty-print
- Se elektita, la eliga kromprogramo provos krei rezulton
laŭeble legeblan por homaj okuloj. Eventuale ne influos iujn
eligajn kromprogramojn.
- --custom-size
- Custom size of the document. Use the form width x height
e.g. 123x321 to specify the width and height. This overrides any
specified paper-size.
- --paper-size
- The size of the paper. This size will be overridden when a
non default output profile is used. Default is letter. Choices are a0, a1,
a2, a3, a4, a5, a6, b0, b1, b2, b3, b4, b5, b6, legal, letter
- --pdf-add-toc
- Add a Table of Contents at the end of the PDF that lists
page numbers. Useful if you want to print out the PDF. If this PDF is
intended for electronic use, use the PDF Outline instead.
- --pdf-default-font-size
- The default font size (in pixels)
- --pdf-footer-template
- An HTML template used to generate footers on every page.
The strings _PAGENUM_, _TITLE_, _AUTHOR_ and _SECTION_ will be replaced by
their current values.
- --pdf-header-template
- An HTML template used to generate headers on every page.
The strings _PAGENUM_, _TITLE_, _AUTHOR_ and _SECTION_ will be replaced by
their current values.
- --pdf-hyphenate
- Break long words at the end of lines. This can give the
text at the right margin a more even appearance. Note that depending on
the fonts used this option can break the copying of text from the PDF
file.
- --pdf-mark-links
- Surround all links with a red box, useful for
debugging.
- --pdf-mono-family
- The font family used to render monospace fonts. Will work
only if the font is available system-wide.
- --pdf-mono-font-size
- The default font size for monospaced text (in pixels)
- --pdf-odd-even-offset
- Shift the text horizontally by the specified offset (in
pts). On odd numbered pages, it is shifted to the right and on even
numbered pages to the left. Use negative numbers for the opposite effect.
Note that this setting is ignored on pages where the margins are smaller
than the specified offset. Shifting is done by setting the PDF CropBox,
not all software respects the CropBox.
- --pdf-page-margin-bottom
- The size of the bottom page margin, in pts. Default is
72pt. Overrides the common bottom page margin setting, unless set to
zero.
- --pdf-page-margin-left
- The size of the left page margin, in pts. Default is 72pt.
Overrides the common left page margin setting.
- --pdf-page-margin-right
- The size of the right page margin, in pts. Default is 72pt.
Overrides the common right page margin setting, unless set to zero.
- --pdf-page-margin-top
- The size of the top page margin, in pts. Default is 72pt.
Overrides the common top page margin setting, unless set to zero.
- --pdf-page-number-map
- Adjust page numbers, as needed. Syntax is a JavaScript
expression for the page number. For example, "if (n < 3) 0;
else n - 3; ", where n is current page number.
- --pdf-page-numbers
- Add page numbers to the bottom of every page in the
generated PDF file. If you specify a footer template, it will take
precedence over this option.
- --pdf-sans-family
- The font family used to render sans-serif fonts. Will work
only if the font is available system-wide.
- --pdf-serif-family
- The font family used to render serif fonts. Will work only
if the font is available system-wide.
- --pdf-standard-font
- The font family used to render monospace fonts
- --pdf-use-document-margins
- Use the page margins specified in the input document via
@page CSS rules. This will cause the margins specified in the conversion
settings to be ignored. If the document does not specify page margins, the
conversion settings will be used as a fallback.
- --preserve-cover-aspect-ratio
- Preserve the aspect ratio of the cover, instead of
stretching it to fill the full first page of the generated PDF.
- --pretty-print
- Se elektita, la eliga kromprogramo provos krei rezulton
laŭeble legeblan por homaj okuloj. Eventuale ne influos iujn
eligajn kromprogramojn.
- --toc-title
- Title for generated table of contents.
- --uncompressed-pdf
- Generate an uncompressed PDF, useful for debugging.
- --unit, -u
- The unit of measure for page sizes. Default is inch.
Choices are millimeter, centimeter, point, inch, pica, didot, cicero,
devicepixel Note: This does not override the unit for margins!
- --use-profile-size
- Instead of using the paper size specified in the PDF Output
options, use a paper size corresponding to the current output profile.
Useful if you want to generate a PDF for viewing on a specific
device.
- --full-image-depth
- Do not reduce the size or bit depth of images. Images have
their size and depth reduced by default to accommodate applications that
can not convert images on their own such as Dropbook.
- --inline-toc
- Add Table of Contents to beginning of the book.
- --pml-output-encoding
- Specify the character encoding of the output document. The
default is cp1252.
- --pretty-print
- Se elektita, la eliga kromprogramo provos krei rezulton
laŭeble legeblan por homaj okuloj. Eventuale ne influos iujn
eligajn kromprogramojn.
- --inline-toc
- Add Table of Contents to beginning of the book.
- --pretty-print
- Se elektita, la eliga kromprogramo provos krei rezulton
laŭeble legeblan por homaj okuloj. Eventuale ne influos iujn
eligajn kromprogramojn.
- --pretty-print
- Se elektita, la eliga kromprogramo provos krei rezulton
laŭeble legeblan por homaj okuloj. Eventuale ne influos iujn
eligajn kromprogramojn.
- --pretty-print
- Se elektita, la eliga kromprogramo provos krei rezulton
laŭeble legeblan por homaj okuloj. Eventuale ne influos iujn
eligajn kromprogramojn.
- --snb-dont-indent-first-line
- Specify whether or not to insert two space characters to
indent the first line of each paragraph.
- --snb-full-screen
- Resize all the images for full screen mode.
- --snb-hide-chapter-name
- Specify whether or not to hide the chapter title for each
chapter. Useful for image-only output (eg. comics).
- --snb-insert-empty-line
- Specify whether or not to insert an empty line between two
paragraphs.
- --snb-max-line-length
- The maximum number of characters per line. This splits on
the first space before the specified value. If no space is found the line
will be broken at the space after and will exceed the specified value.
Also, there is a minimum of 25 characters. Use 0 to disable line
splitting.
- --snb-output-encoding
- Specify the character encoding of the output document. The
default is utf-8.
- --pretty-print
- Se elektita, la eliga kromprogramo provos krei rezulton
laŭeble legeblan por homaj okuloj. Eventuale ne influos iujn
eligajn kromprogramojn.
- --tcr-output-encoding
- Specify the character encoding of the output document. The
default is utf-8.
- --force-max-line-length
- Force splitting on the max-line-length value when no space
is present. Also allows max-line-length to be below the minimum
- --inline-toc
- Add Table of Contents to beginning of the book.
- --keep-color
- Do not remove font color from output. This is only useful
when TXT output formatting is set to textile. Textile is the only
formatting that supports setting font color. If this option is not
specified font color will not be set and default to the color displayed by
the reader (generally this is black).
- --keep-image-references
- Do not remove image references within the document. This is
only useful when paired with a TXT output formatting option that is not
none because links are always removed with plain text output.
- --keep-links
- Do not remove links within the document. This is only
useful when paired with a TXT output formatting option that is not none
because links are always removed with plain text output.
- --max-line-length
- The maximum number of characters per line. This splits on
the first space before the specified value. If no space is found the line
will be broken at the space after and will exceed the specified value.
Also, there is a minimum of 25 characters. Use 0 to disable line
splitting.
- --newline, -n
- Type of newline to use. Options are
['old_mac', 'system', 'unix',
'windows']. Default is 'system'. Use
'old_mac ' for compatibility with Mac OS 9 and earlier. For
macOS use 'unix'. 'system' will default to the
newline type used by this OS.
- --pretty-print
- Se elektita, la eliga kromprogramo provos krei rezulton
laŭeble legeblan por homaj okuloj. Eventuale ne influos iujn
eligajn kromprogramojn.
- --txt-output-encoding
- Specify the character encoding of the output document. The
default is utf-8.
- --txt-output-formatting
- Formatting used within the document. * plain: Simpla teksto
* markdown: Markdown formatted text * textile: TexTile formatted text
- --force-max-line-length
- Force splitting on the max-line-length value when no space
is present. Also allows max-line-length to be below the minimum
- --inline-toc
- Add Table of Contents to beginning of the book.
- --keep-color
- Do not remove font color from output. This is only useful
when TXT output formatting is set to textile. Textile is the only
formatting that supports setting font color. If this option is not
specified font color will not be set and default to the color displayed by
the reader (generally this is black).
- --keep-image-references
- Do not remove image references within the document. This is
only useful when paired with a TXT output formatting option that is not
none because links are always removed with plain text output.
- --keep-links
- Do not remove links within the document. This is only
useful when paired with a TXT output formatting option that is not none
because links are always removed with plain text output.
- --max-line-length
- The maximum number of characters per line. This splits on
the first space before the specified value. If no space is found the line
will be broken at the space after and will exceed the specified value.
Also, there is a minimum of 25 characters. Use 0 to disable line
splitting.
- --newline, -n
- Type of newline to use. Options are
['old_mac', 'system', 'unix',
'windows']. Default is 'system'. Use
'old_mac ' for compatibility with Mac OS 9 and earlier. For
macOS use 'unix'. 'system' will default to the
newline type used by this OS.
- --pretty-print
- Se elektita, la eliga kromprogramo provos krei rezulton
laŭeble legeblan por homaj okuloj. Eventuale ne influos iujn
eligajn kromprogramojn.
- --txt-output-encoding
- Specify the character encoding of the output document. The
default is utf-8.
- --txt-output-formatting
- Formatting used within the document. * plain: Simpla teksto
* markdown: Markdown formatted text * textile: TexTile formatted text
Kovid Goyal
Kovid Goyal