NAME
geom_map — GEOM module that maps defined items as separate partitionsSYNOPSIS
To compile this driver into the kernel, place the following line in your kernel configuration file:options
geom_map
DESCRIPTION
The geom_map framework provides support for mapping defined parts of the media. Basically it is helpful for embedded devices where in the one continuous flash are loader, kernel and rootfs parts. geom_map allows making them available as separate parts and protects the loader from being overwritten. At boot time geom_map partitions are listed (only with bootverbose) as:MAP: 0x30000, data=0x30000 "/dev/map/bootloader" MAP: 30000x10000, data=0x10000 "/dev/map/factory" MAP: 40000x7a0000, data=0x7a0000 "/dev/map/upgrade" MAP: search key ".!/bin/sh" from 0x100000, step 0x10000 MAP: 40000x110000, data=0x110000 "/dev/map/kernel" MAP: search key ".!/bin/sh" from 0x100000, step 0x10000 MAP: 150000x690000, data=0x690000 "/dev/map/rootfs" MAP: 7e0000x20000, data=0x20000 "/dev/map/config"
geom map list”.
# sysctl -n kern.geom.conftxt 0 MD md0 10485760 512 u 0 s 512 f 0 fs 0 l 10485760 t malloc 0 DISK cfid0 8388608 4 hd 0 sc 0 1 MAP map/config 131072 4 i 5 o 8257536 entry 0 dsize 131072 1 MAP map/rootfs 6881280 4 i 4 o 1376256 entry 0 dsize 6881280 2 UZIP map/rootfs.uzip 18677760 512 1 MAP map/kernel 1114112 4 i 3 o 262144 entry 0 dsize 1114112 1 MAP map/upgrade 7995392 4 i 2 o 262144 entry 0 dsize 7995392 1 MAP map/factory 65536 4 i 1 o 196608 entry 0 dsize 65536 1 MAP map/bootloader 196608 4 i 0 o 0 entry 0 dsize 196608
- at
- select media to attach
- name
- name of partition (will create device /dev/map/that_name)
- start
- offset from the beginning of the parent media to start of
the mapped partition. This field can also have a special value
“
search:searchstart:searchstep:searchkey”, where:- searchstart
- offset from the beginning of the parent media where search will be started
- searchstep
- value of the increment used while searching for the partition boundary markers
- searchkey
- key which will be used to find partition boundary
markers. The wildcard ‘
.’ can be used to match any character on that position
- end
- offset from the beginning of the parent media to the end of
the mapped partition. This field can also have the special value
“
search:searchstart:searchstep:searchkey”, as described above. - offset
- offset where the data of the mapped partition begins
MAP: 150000x690000, data=0x690000 "/dev/map/rootfs"
00150000 - start address 00690000 - size 00000000 - data begin from zero offset 00690000 - data size "map/rootfs" - new media will be accessible via /dev/map/rootfs dev.
EXAMPLES
If we need to implement layout shown above, we need to define the following hints:hint.map.0.at="cfid0" hint.map.0.start=0x00000000 hint.map.0.end=0x00030000 hint.map.0.name="bootloader" hint.map.0.readonly=1
0x00000000 and ending at
0x00030000, it is also marked as readonly.
hint.map.1.at="cfid0" hint.map.1.start=0x00030000 hint.map.1.end=0x00040000 hint.map.1.name="factory" hint.map.2.at="cfid0" hint.map.2.start=0x00040000 hint.map.2.end=0x007e0000 hint.map.2.name="upgrade" hint.map.3.at="cfid0" hint.map.3.name="kernel" hint.map.3.start=0x00040000 hint.map.3.end="search:0x00100000:0x10000:.!/bin/sh"
0x00040000, but the end position must be searched by
finding the key “.!/bin/sh”, from offset
0x00100000 to the end of media with step
0x10000. The real marker in this case is
“#!/bin/sh”, but
‘#’ terminates the line when the hints
file is parsed, so we need to use wildcard
‘.’ instead of
‘#’.
hint.map.4.at="cfid0" hint.map.4.name="rootfs" hint.map.4.start="search:0x00100000:0x10000:.!/bin/sh" hint.map.4.end=0x007e0000 hint.map.5.at="cfid0" hint.map.5.start=0x007e0000 hint.map.5.end=0x00800000 hint.map.5.name="config"
SEE ALSO
geom(4), geom(8), sysctl(8)AUTHORS
The geom_map driver was written by Aleksandr Rybalko <[email protected]>.| June 8, 2015 | Debian |