sane-nec - SANE backend for NEC scanners
The
sane-nec library implements a SANE (Scanner Access Now Easy) backend
that provides access to NEC SCSI scanners. This backend should be considered
alpha-quality software! In the current state it is known to work with
PC-IN500/4C scanners. Other MultiReader scanner series are not supported.
PC-IN 500/4C and MultiReader scanner are only sold in Japan (except Multi
Reader PetiScan).
For other scanners, it may or may not work.
The backend has the following known problems:
- - ColorLineart mode is not supported.
- - Device name is fixed to /dev/scanner
At present, the following scanners are known to work with this backend.
Vendor Product id
------ -----------
NEC PC-IN500/4C
- /etc/sane.d/nec.conf
- The backend configuration file.
- /usr/lib/x86_64-linux-gnu/sane/libsane-nec.a
- The static library implementing this backend.
- /usr/lib/x86_64-linux-gnu/sane/libsane-nec.so
- The shared library implementing this backend (present on
systems that support dynamic loading).
- SANE_DEBUG_NEC
- If the library was compiled with debug support enabled,
this environment variable controls the debug level for this backend. E.g.,
a value of 128 requests all debug output to be printed. Smaller levels
reduce verbosity.
sane(7),
sane-scsi(5)
Kazuya Fukuda