NAME
sim_axis_hardware - A component to simulate home and limit switchesSYNOPSIS
loadrt
sim_axis_hardware [count=
N|names=name1[,name2... ]]
DESCRIPTION
This component creates simulated home and limit switches based on the current position.FUNCTIONS
- sim-axis-hardware.N.update (requires a floating-point thread)
PINS
- sim-axis-hardware.N.Xcurrent-pos float in
- The current position on the axis - eg connect to joint.0.motor-pos-fb
- sim-axis-hardware.N.X2current-pos float in
-
- sim-axis-hardware.N.Ycurrent-pos float in
-
- sim-axis-hardware.N.Y2current-pos float in
-
- sim-axis-hardware.N.Zcurrent-pos float in
-
- sim-axis-hardware.N.Acurrent-pos float in
-
- sim-axis-hardware.N.Ucurrent-pos float in
-
- sim-axis-hardware.N.Vcurrent-pos float in
-
- sim-axis-hardware.N.Xhomesw-pos float in (default: 1)
- The position of the home switch
- sim-axis-hardware.N.X2homesw-pos float in (default: 1)
-
- sim-axis-hardware.N.Yhomesw-pos float in (default: 1)
-
- sim-axis-hardware.N.Y2homesw-pos float in (default: 1)
-
- sim-axis-hardware.N.Zhomesw-pos float in (default: 1)
-
- sim-axis-hardware.N.Ahomesw-pos float in (default: 1)
-
- sim-axis-hardware.N.Uhomesw-pos float in (default: 1)
-
- sim-axis-hardware.N.Vhomesw-pos float in (default: 1)
-
- sim-axis-hardware.N.Xmaxsw-upper float in
- The upper range of the maximum limit switch, above this is false.
- sim-axis-hardware.N.X2maxsw-upper float in
-
- sim-axis-hardware.N.Ymaxsw-upper float in
-
- sim-axis-hardware.N.Y2maxsw-upper float in
-
- sim-axis-hardware.N.Zmaxsw-upper float in
-
- sim-axis-hardware.N.Amaxsw-upper float in
-
- sim-axis-hardware.N.Umaxsw-upper float in
-
- sim-axis-hardware.N.Vmaxsw-upper float in
-
- sim-axis-hardware.N.Xmaxsw-lower float in
- The lower range of the maximum limit switch, below this is false.
- sim-axis-hardware.N.X2maxsw-lower float in
-
- sim-axis-hardware.N.Ymaxsw-lower float in
-
- sim-axis-hardware.N.Y2maxsw-lower float in
-
- sim-axis-hardware.N.Zmaxsw-lower float in
-
- sim-axis-hardware.N.Amaxsw-lower float in
-
- sim-axis-hardware.N.Umaxsw-lower float in
-
- sim-axis-hardware.N.Vmaxsw-lower float in
-
- sim-axis-hardware.N.Xminsw-upper float in
- The upper range of the minimum limit switch, above this is false.
- sim-axis-hardware.N.X2minsw-upper float in
-
- sim-axis-hardware.N.Yminsw-upper float in
-
- sim-axis-hardware.N.Y2minsw-upper float in
-
- sim-axis-hardware.N.Zminsw-upper float in
-
- sim-axis-hardware.N.Aminsw-upper float in
-
- sim-axis-hardware.N.Uminsw-upper float in
-
- sim-axis-hardware.N.Vminsw-upper float in
-
- sim-axis-hardware.N.Xminsw-lower float in
- The lower range of the minimum limit switch, below this is false.
- sim-axis-hardware.N.X2minsw-lower float in
-
- sim-axis-hardware.N.Yminsw-lower float in
-
- sim-axis-hardware.N.Y2minsw-lower float in
-
- sim-axis-hardware.N.Zminsw-lower float in
-
- sim-axis-hardware.N.Aminsw-lower float in
-
- sim-axis-hardware.N.Uminsw-lower float in
-
- sim-axis-hardware.N.Vminsw-lower float in
-
- sim-axis-hardware.N.Xhomesw-hyst float in (default: .025)
- range that home switch will be true +- half this to the home position
- sim-axis-hardware.N.X2homesw-hyst float in (default: .025)
-
- sim-axis-hardware.N.Yhomesw-hyst float in (default: .025)
-
- sim-axis-hardware.N.Y2homesw-hyst float in (default: .025)
-
- sim-axis-hardware.N.Zhomesw-hyst float in (default: .025)
-
- sim-axis-hardware.N.Ahomesw-hyst float in (default: .025)
-
- sim-axis-hardware.N.Uhomesw-hyst float in (default: .025)
-
- sim-axis-hardware.N.Vhomesw-hyst float in (default: .025)
-
- sim-axis-hardware.N.Xhoming bit in
- True is homing in progress
- sim-axis-hardware.N.X2homing bit in
-
- sim-axis-hardware.N.Yhoming bit in
-
- sim-axis-hardware.N.Y2homing bit in
-
- sim-axis-hardware.N.Zhoming bit in
-
- sim-axis-hardware.N.Ahoming bit in
-
- sim-axis-hardware.N.Uhoming bit in
-
- sim-axis-hardware.N.Vhoming bit in
-
- sim-axis-hardware.N.Xhomesw-out bit out
- Home switch for the X axis
- sim-axis-hardware.N.X2homesw-out bit out
-
- sim-axis-hardware.N.Yhomesw-out bit out
-
- sim-axis-hardware.N.Y2homesw-out bit out
-
- sim-axis-hardware.N.Zhomesw-out bit out
-
- sim-axis-hardware.N.Ahomesw-out bit out
-
- sim-axis-hardware.N.Uhomesw-out bit out
-
- sim-axis-hardware.N.Vhomesw-out bit out
-
- sim-axis-hardware.N.homesw-all bit out
-
- sim-axis-hardware.N.Xmaxsw-out bit out
- Max limit switch
- sim-axis-hardware.N.Xminsw-out bit out
- min limit switch
- sim-axis-hardware.N.Xbothsw-out bit out
- True for both max and min limit switch
- sim-axis-hardware.N.X2maxsw-out bit out
-
- sim-axis-hardware.N.X2minsw-out bit out
-
- sim-axis-hardware.N.X2bothsw-out bit out
-
- sim-axis-hardware.N.Ymaxsw-out bit out
-
- sim-axis-hardware.N.Yminsw-out bit out
-
- sim-axis-hardware.N.Ybothsw-out bit out
-
- sim-axis-hardware.N.Y2maxsw-out bit out
-
- sim-axis-hardware.N.Y2minsw-out bit out
-
- sim-axis-hardware.N.Y2bothsw-out bit out
-
- sim-axis-hardware.N.Zmaxsw-out bit out
-
- sim-axis-hardware.N.Zminsw-out bit out
-
- sim-axis-hardware.N.Zbothsw-out bit out
-
- sim-axis-hardware.N.Amaxsw-out bit out
-
- sim-axis-hardware.N.Aminsw-out bit out
-
- sim-axis-hardware.N.Abothsw-out bit out
-
- sim-axis-hardware.N.Umaxsw-out bit out
-
- sim-axis-hardware.N.Uminsw-out bit out
-
- sim-axis-hardware.N.Ubothsw-out bit out
-
- sim-axis-hardware.N.Vmaxsw-out bit out
-
- sim-axis-hardware.N.Vminsw-out bit out
-
- sim-axis-hardware.N.Vbothsw-out bit out
-
- sim-axis-hardware.N.limitsw-all bit out
-
- sim-axis-hardware.N.limitsw-homesw-all bit out
- True for all limits and all home.
- sim-axis-hardware.N.Xmaxsw-homesw-out bit out
-
- sim-axis-hardware.N.Xminsw-homesw-out bit out
-
- sim-axis-hardware.N.Xbothsw-homesw-out bit out
-
- sim-axis-hardware.N.X2maxsw-homesw-out bit out
-
- sim-axis-hardware.N.X2minsw-homesw-out bit out
-
- sim-axis-hardware.N.X2bothsw-homesw-out bit out
-
- sim-axis-hardware.N.Ymaxsw-homesw-out bit out
-
- sim-axis-hardware.N.Yminsw-homesw-out bit out
-
- sim-axis-hardware.N.Ybothsw-homesw-out bit out
-
- sim-axis-hardware.N.Y2maxsw-homesw-out bit out
-
- sim-axis-hardware.N.Y2minsw-homesw-out bit out
-
- sim-axis-hardware.N.Y2bothsw-homesw-out bit out
-
- sim-axis-hardware.N.Zmaxsw-homesw-out bit out
-
- sim-axis-hardware.N.Zminsw-homesw-out bit out
-
- sim-axis-hardware.N.Zbothsw-homesw-out bit out
-
- sim-axis-hardware.N.Amaxsw-homesw-out bit out
-
- sim-axis-hardware.N.Aminsw-homesw-out bit out
-
- sim-axis-hardware.N.Abothsw-homesw-out bit out
-
- sim-axis-hardware.N.Umaxsw-homesw-out bit out
-
- sim-axis-hardware.N.Uminsw-homesw-out bit out
-
- sim-axis-hardware.N.Ubothsw-homesw-out bit out
-
- sim-axis-hardware.N.Vmaxsw-homesw-out bit out
-
- sim-axis-hardware.N.Vminsw-homesw-out bit out
-
- sim-axis-hardware.N.Vbothsw-homesw-out bit out
-
- sim-axis-hardware.N.limit-offset float in (default: .01)
- how much the limit switches are offset from inputted position. added to max, subtracted from min
AUTHOR
Chris S MorleyLICENSE
GPL| 2023-02-10 | LinuxCNC Documentation |