AnyEvent::Socket - useful IPv4 and IPv6 stuff. also unix domain sockets. and
stuff.
use AnyEvent::Socket;
tcp_connect "gameserver.deliantra.net", 13327, sub {
my ($fh) = @_
or die "gameserver.deliantra.net connect failed: $!";
# enjoy your filehandle
};
# a simple tcp server
tcp_server undef, 8888, sub {
my ($fh, $host, $port) = @_;
syswrite $fh, "The internet is full, $host:$port. Go away!\015\012";
};
This module implements various utility functions for handling internet protocol
addresses and sockets, in an as transparent and simple way as possible.
All functions documented without "AnyEvent::Socket::" prefix are
exported by default.
- $ipn = parse_ipv4 $dotted_quad
- Tries to parse the given dotted quad IPv4 address and
return it in octet form (or undef when it isn't in a parsable format).
Supports all forms specified by POSIX (e.g. 10.0.0.1, 10.1,
"10.0x020304", 0x12345678 or 0377.0377.0377.0377).
- $ipn = parse_ipv6 $textual_ipv6_address
- Tries to parse the given IPv6 address and return it in
octet form (or undef when it isn't in a parsable format).
Should support all forms specified by RFC 2373 (and additionally all IPv4
forms supported by parse_ipv4). Note that scope-id's are not supported
(and will not parse).
This function works similarly to "inet_pton AF_INET6, ...".
Example:
print unpack "H*", parse_ipv6 "2002:5345::10.0.0.1";
# => 2002534500000000000000000a000001
print unpack "H*", parse_ipv6 "192.89.98.1";
# => 00000000000000000000ffffc0596201
- $token = parse_unix $hostname
- This function exists mainly for symmetry to the other
"parse_protocol" functions - it takes a hostname and, if it is
"unix/", it returns a special address token, otherwise
"undef".
The only use for this function is probably to detect whether a hostname
matches whatever AnyEvent uses for unix domain sockets.
- $ipn = parse_address $ip
- Combines "parse_ipv4", "parse_ipv6" and
"parse_unix" in one function. The address here refers to the
host address (not socket address) in network form (binary).
If the $text is "unix/", then this function returns a special
token recognised by the other functions in this module to mean "UNIX
domain socket".
If the $text to parse is a plain IPv4 or mapped IPv4 in IPv6 address
(:ffff::<ipv4>), then it will be treated as an IPv4 address and four
octets will be returned. If you don't want that, you have to call
"parse_ipv4" and/or "parse_ipv6" manually (the latter
always returning a 16 octet IPv6 address for mapped IPv4 addresses).
Example:
print unpack "H*", parse_address "10.1.2.3";
# => 0a010203
- $ipn = AnyEvent::Socket::aton $ip
- Same as "parse_address", but not exported (think
"Socket::inet_aton" but without name resolution).
- ($name, $aliases, $proto) = getprotobyname $name
- Works like the builtin function of the same name, except it
tries hard to work even on broken platforms (well, that's windows), where
getprotobyname is traditionally very unreliable.
Example: get the protocol number for TCP (usually 6)
my $proto = getprotobyname "tcp";
- ($host, $service) = parse_hostport $string[,
$default_service]
- Splitting a string of the form "hostname:port" is
a common problem. Unfortunately, just splitting on the colon makes it hard
to specify IPv6 addresses and doesn't support the less common but well
standardised "[ip literal]" syntax.
This function tries to do this job in a better way, it supports (at least)
the following formats, where "port" can be a numerical port
number of a service name, or a "name=port" string, and the
" port" and ":port" parts are optional. Also,
everywhere where an IP address is supported a hostname or unix domain
socket address is also supported (see "parse_unix"), and strings
starting with "/" will also be interpreted as unix domain
sockets.
hostname:port e.g. "www.linux.org", "www.x.de:443", "www.x.de:https=443",
ipv4:port e.g. "198.182.196.56", "127.1:22"
ipv6 e.g. "::1", "affe::1"
[ipv4or6]:port e.g. "[::1]", "[10.0.1]:80"
[ipv4or6] port e.g. "[127.0.0.1]", "[www.x.org] 17"
ipv4or6 port e.g. "::1 443", "10.0.0.1 smtp"
unix/:path e.g. "unix/:/path/to/socket"
/path e.g. "/path/to/socket"
It also supports defaulting the service name in a simple way by using
$default_service if no service was detected. If neither a service was
detected nor a default was specified, then this function returns the empty
list. The same happens when a parse error was detected, such as a hostname
with a colon in it (the function is rather forgiving, though).
Example:
print join ",", parse_hostport "localhost:443";
# => "localhost,443"
print join ",", parse_hostport "localhost", "https";
# => "localhost,https"
print join ",", parse_hostport "[::1]";
# => "," (empty list)
print join ",", parse_hostport "/tmp/debug.sock";
# => "unix/", "/tmp/debug.sock"
- $string = format_hostport $host, $port
- Takes a host (in textual form) and a port and formats in
unambigiously in a way that "parse_hostport" can parse it again.
$port can be "undef".
- $sa_family = address_family $ipn
- Returns the address family/protocol-family (AF_xxx/PF_xxx,
in one value :) of the given host address in network format.
- $text = format_ipv4 $ipn
- Expects a four octet string representing a binary IPv4
address and returns its textual format. Rarely used, see
"format_address" for a nicer interface.
- $text = format_ipv6 $ipn
- Expects a sixteen octet string representing a binary IPv6
address and returns its textual format. Rarely used, see
"format_address" for a nicer interface.
- $text = format_address $ipn
- Covnvert a host address in network format (e.g. 4 octets
for IPv4 or 16 octets for IPv6) and convert it into textual form.
Returns "unix/" for UNIX domain sockets.
This function works similarly to "inet_ntop AF_INET || AF_INET6,
...", except it automatically detects the address type.
Returns "undef" if it cannot detect the type.
If the $ipn is a mapped IPv4 in IPv6 address (:ffff::<ipv4>), then
just the contained IPv4 address will be returned. If you do not want that,
you have to call "format_ipv6" manually.
Example:
print format_address "\x01\x02\x03\x05";
=> 1.2.3.5
- $text = AnyEvent::Socket::ntoa $ipn
- Same as format_address, but not exported (think
"inet_ntoa").
- inet_aton $name_or_address, $cb->(@addresses)
- Works similarly to its Socket counterpart, except that it
uses a callback. Use the length to distinguish between ipv4 and ipv6 (4
octets for IPv4, 16 for IPv6), or use "format_address" to
convert it to a more readable format.
Note that "resolve_sockaddr", while initially a more complex
interface, resolves host addresses, IDNs, service names and SRV records
and gives you an ordered list of socket addresses to try and should be
preferred over "inet_aton".
Example.
inet_aton "www.google.com", my $cv = AE::cv;
say unpack "H*", $_
for $cv->recv;
# => d155e363
# => d155e367 etc.
inet_aton "ipv6.google.com", my $cv = AE::cv;
say unpack "H*", $_
for $cv->recv;
# => 20014860a00300000000000000000068
- $sa = AnyEvent::Socket::pack_sockaddr $service, $host
- Pack the given port/host combination into a binary sockaddr
structure. Handles both IPv4 and IPv6 host addresses, as well as UNIX
domain sockets ($host == "unix/" and $service == absolute
pathname).
Example:
my $bind = AnyEvent::Socket::pack_sockaddr 43, v195.234.53.120;
bind $socket, $bind
or die "bind: $!";
- ($service, $host) = AnyEvent::Socket::unpack_sockaddr
$sa
- Unpack the given binary sockaddr structure (as used by
bind, getpeername etc.) into a "$service, $host" combination.
For IPv4 and IPv6, $service is the port number and $host the host address in
network format (binary).
For UNIX domain sockets, $service is the absolute pathname and $host is a
special token that is understood by the other functions in this module
("format_address" converts it to "unix/").
- AnyEvent::Socket::resolve_sockaddr $node, $service, $proto,
$family, $type, $cb->([$family, $type, $proto, $sockaddr], ...)
- Tries to resolve the given nodename and service name into
protocol families and sockaddr structures usable to connect to this node
and service in a protocol-independent way. It works remotely similar to
the getaddrinfo posix function.
For internet addresses, $node is either an IPv4 or IPv6 address, an internet
hostname (DNS domain name or IDN), and $service is either a service name
(port name from /etc/services) or a numerical port number. If both
$node and $service are names, then SRV records will be consulted to find
the real service, otherwise they will be used as-is. If you know that the
service name is not in your services database, then you can specify the
service in the format "name=port" (e.g. "http=80").
If a host cannot be found via DNS, then it will be looked up in
/etc/hosts (or the file specified via $ENV{PERL_ANYEVENT_HOSTS}).
If they are found, the addresses there will be used. The effect is as if
entries from /etc/hosts would yield "A" and
"AAAA" records for the host name unless DNS already had records
for them.
For UNIX domain sockets, $node must be the string "unix/" and
$service must be the absolute pathname of the socket. In this case, $proto
will be ignored.
$proto must be a protocol name, currently "tcp", "udp"
or "sctp". The default is currently "tcp", but in the
future, this function might try to use other protocols such as
"sctp", depending on the socket type and any SRV records it
might find.
$family must be either 0 (meaning any protocol is OK), 4 (use only IPv4) or
6 (use only IPv6). The default is influenced by
$ENV{PERL_ANYEVENT_PROTOCOLS}.
$type must be "SOCK_STREAM", "SOCK_DGRAM" or
"SOCK_SEQPACKET" (or "undef" in which case it gets
automatically chosen to be "SOCK_STREAM" unless $proto is
"udp").
The callback will receive zero or more array references that contain
"$family, $type, $proto" for use in "socket" and a
binary $sockaddr for use in "connect" (or "bind").
The application should try these in the order given.
Example:
resolve_sockaddr "google.com", "http", 0, undef, undef, sub { ... };
- $guard = tcp_connect $host, $service, $connect_cb[,
$prepare_cb]
- This is a convenience function that creates a TCP socket
and makes a 100% non-blocking connect to the given $host (which can be a
DNS/IDN hostname or a textual IP address, or the string "unix/"
for UNIX domain sockets) and $service (which can be a numeric port number
or a service name, or a "servicename=portnumber" string, or the
pathname to a UNIX domain socket).
If both $host and $port are names, then this function will use SRV records
to locate the real target(s).
In either case, it will create a list of target hosts (e.g. for multihomed
hosts or hosts with both IPv4 and IPv6 addresses) and try to connect to
each in turn.
After the connection is established, then the $connect_cb will be invoked
with the socket file handle (in non-blocking mode) as first, and the peer
host (as a textual IP address) and peer port as second and third
arguments, respectively. The fourth argument is a code reference that you
can call if, for some reason, you don't like this connection, which will
cause "tcp_connect" to try the next one (or call your callback
without any arguments if there are no more connections). In most cases,
you can simply ignore this argument.
$cb->($filehandle, $host, $port, $retry)
If the connect is unsuccessful, then the $connect_cb will be invoked without
any arguments and $! will be set appropriately (with "ENXIO"
indicating a DNS resolution failure).
The callback will never be invoked before "tcp_connect"
returns, even if "tcp_connect" was able to connect immediately
(e.g. on unix domain sockets).
The file handle is perfect for being plugged into AnyEvent::Handle, but can
be used as a normal perl file handle as well.
Unless called in void context, "tcp_connect" returns a guard
object that will automatically cancel the connection attempt when it gets
destroyed - in which case the callback will not be invoked. Destroying it
does not do anything to the socket after the connect was successful - you
cannot "uncall" a callback that has been invoked already.
Sometimes you need to "prepare" the socket before connecting, for
example, to "bind" it to some port, or you want a specific
connect timeout that is lower than your kernel's default timeout. In this
case you can specify a second callback, $prepare_cb. It will be called
with the file handle in not-yet-connected state as only argument and must
return the connection timeout value (or 0, "undef" or the empty
list to indicate the default timeout is to be used).
Note to the poor Microsoft Windows users: Windows (of course) doesn't
correctly signal connection errors, so unless your event library works
around this, failed connections will simply hang. The only event libraries
that handle this condition correctly are EV and Glib. Additionally,
AnyEvent works around this bug with Event and in its pure-perl backend.
All other libraries cannot correctly handle this condition. To lessen the
impact of this windows bug, a default timeout of 30 seconds will be
imposed on windows. Cygwin is not affected.
Simple Example: connect to localhost on port 22.
tcp_connect localhost => 22, sub {
my $fh = shift
or die "unable to connect: $!";
# do something
};
Complex Example: connect to www.google.com on port 80 and make a simple GET
request without much error handling. Also limit the connection timeout to
15 seconds.
tcp_connect "www.google.com", "http",
sub {
my ($fh) = @_
or die "unable to connect: $!";
my $handle; # avoid direct assignment so on_eof has it in scope.
$handle = new AnyEvent::Handle
fh => $fh,
on_error => sub {
AE::log error => $_[2];
$_[0]->destroy;
},
on_eof => sub {
$handle->destroy; # destroy handle
AE::log info => "Done.";
};
$handle->push_write ("GET / HTTP/1.0\015\012\015\012");
$handle->push_read (line => "\015\012\015\012", sub {
my ($handle, $line) = @_;
# print response header
print "HEADER\n$line\n\nBODY\n";
$handle->on_read (sub {
# print response body
print $_[0]->rbuf;
$_[0]->rbuf = "";
});
});
}, sub {
my ($fh) = @_;
# could call $fh->bind etc. here
15
};
Example: connect to a UNIX domain socket.
tcp_connect "unix/", "/tmp/.X11-unix/X0", sub {
...
}
- $guard = tcp_server $host, $service, $accept_cb[,
$prepare_cb]
- Create and bind a stream socket to the given host address
and port, set the SO_REUSEADDR flag (if applicable) and call
"listen". Unlike the name implies, this function can also bind
on UNIX domain sockets.
For internet sockets, $host must be an IPv4 or IPv6 address (or
"undef", in which case it binds either to 0 or to
"::", depending on whether IPv4 or IPv6 is the preferred
protocol, and maybe to both in future versions, as applicable).
To bind to the IPv4 wildcard address, use 0, to bind to the IPv6 wildcard
address, use "::".
The port is specified by $service, which must be either a service name or a
numeric port number (or 0 or "undef", in which case an ephemeral
port will be used).
For UNIX domain sockets, $host must be "unix/" and $service must
be the absolute pathname of the socket. This function will try to
"unlink" the socket before it tries to bind to it, and will try
to unlink it after it stops using it. See SECURITY CONSIDERATIONS, below.
For each new connection that could be "accept"ed, call the
"$accept_cb->($fh, $host, $port)" with the file handle (in
non-blocking mode) as first, and the peer host and port as second and
third arguments (see "tcp_connect" for details).
Croaks on any errors it can detect before the listen.
In non-void context, this function returns a guard object whose lifetime it
tied to the TCP server: If the object gets destroyed, the server will be
stopped and the listening socket will be cleaned up/unlinked (already
accepted connections will not be affected).
When called in void-context, AnyEvent will keep the listening socket alive
internally. In this case, there is no guarantee that the listening socket
will be cleaned up or unlinked.
In all cases, when the function returns to the caller, the socket is bound
and in listening state.
If you need more control over the listening socket, you can provide a
"$prepare_cb->($fh, $host, $port)", which is called just
before the "listen ()" call, with the listen file handle as
first argument, and IP address and port number of the local socket
endpoint as second and third arguments.
It should return the length of the listen queue (or 0 for the default).
Note to IPv6 users: RFC-compliant behaviour for IPv6 sockets listening on
"::" is to bind to both IPv6 and IPv4 addresses by default on
dual-stack hosts. Unfortunately, only GNU/Linux seems to implement this
properly, so if you want both IPv4 and IPv6 listening sockets you should
create the IPv6 socket first and then attempt to bind on the IPv4 socket,
but ignore any "EADDRINUSE" errors.
Example: bind on some TCP port on the local machine and tell each client to
go away.
tcp_server undef, undef, sub {
my ($fh, $host, $port) = @_;
syswrite $fh, "The internet is full, $host:$port. Go away!\015\012";
}, sub {
my ($fh, $thishost, $thisport) = @_;
AE::log info => "Bound to $thishost, port $thisport.";
};
Example: bind a server on a unix domain socket.
tcp_server "unix/", "/tmp/mydir/mysocket", sub {
my ($fh) = @_;
};
- $guard = AnyEvent::Socket::tcp_bind $host, $service,
$done_cb[, $prepare_cb]
- Same as "tcp_server", except it doesn't call
"accept" in a loop for you but simply passes the listen socket
to the $done_cb. This is useful when you want to have a convenient set up
for your listen socket, but want to do the "accept"'ing
yourself, for example, in another process.
In case of an error, "tcp_bind" either croaks, or passes
"undef" to the $done_cb.
In non-void context, a guard will be returned. It will clean up/unlink the
listening socket when destroyed. In void context, no automatic clean up
might be performed.
- tcp_nodelay $fh, $enable
- Enables (or disables) the "TCP_NODELAY" socket
option (also known as Nagle's algorithm). Returns false on error, true
otherwise.
- tcp_congestion $fh, $algorithm
- Sets the tcp congestion avoidance algorithm (via the
"TCP_CONGESTION" socket option). The default is OS-specific, but
is usually "reno". Typical other available choices include
"cubic", "lp", "bic", "highspeed",
"htcp", "hybla", "illinois",
"scalable", "vegas", "veno",
"westwood" and "yeah".
This module is quite powerful, with with power comes the ability to abuse as
well: If you accept "hostnames" and ports from untrusted sources,
then note that this can be abused to delete files (host="unix/").
This is not really a problem with this module, however, as blindly accepting
any address and protocol and trying to bind a server or connect to it is
harmful in general.
Marc Lehmann <[email protected]>
http://anyevent.schmorp.de