AutoLoader - load subroutines only on demand
package Foo;
use AutoLoader 'AUTOLOAD'; # import the default AUTOLOAD subroutine
package Bar;
use AutoLoader; # don't import AUTOLOAD, define our own
sub AUTOLOAD {
...
$AutoLoader::AUTOLOAD = "...";
goto &AutoLoader::AUTOLOAD;
}
The
AutoLoader module works with the
AutoSplit module and the
"__END__" token to defer the loading of some subroutines until they
are used rather than loading them all at once.
To use
AutoLoader, the author of a module has to place the definitions of
subroutines to be autoloaded after an "__END__" token. (See
perldata.) The
AutoSplit module can then be run manually to extract the
definitions into individual files
auto/funcname.al.
AutoLoader implements an AUTOLOAD subroutine. When an undefined
subroutine in is called in a client module of
AutoLoader,
AutoLoader's AUTOLOAD subroutine attempts to locate the subroutine in a
file with a name related to the location of the file from which the client
module was read. As an example, if
POSIX.pm is located in
/usr/local/lib/perl5/POSIX.pm,
AutoLoader will look for perl
subroutines
POSIX in
/usr/local/lib/perl5/auto/POSIX/*.al, where
the ".al" file has the same name as the subroutine, sans package. If
such a file exists, AUTOLOAD will read and evaluate it, thus (presumably)
defining the needed subroutine. AUTOLOAD will then "goto" the newly
defined subroutine.
Once this process completes for a given function, it is defined, so future calls
to the subroutine will bypass the AUTOLOAD mechanism.
In order for object method lookup and/or prototype checking to operate correctly
even when methods have not yet been defined it is necessary to "forward
declare" each subroutine (as in "sub NAME;"). See
"SYNOPSIS" in perlsub. Such forward declaration creates
"subroutine stubs", which are place holders with no code.
The AutoSplit and
AutoLoader modules automate the creation of forward
declarations. The AutoSplit module creates an 'index' file containing forward
declarations of all the AutoSplit subroutines. When the AutoLoader module is
'use'd it loads these declarations into its callers package.
Because of this mechanism it is important that
AutoLoader is always
"use"d and not "require"d.
In order to use
AutoLoader's AUTOLOAD subroutine you
must
explicitly import it:
use AutoLoader 'AUTOLOAD';
Some modules, mainly extensions, provide their own AUTOLOAD subroutines. They
typically need to check for some special cases (such as constants) and then
fallback to
AutoLoader's AUTOLOAD for the rest.
Such modules should
not import
AutoLoader's AUTOLOAD subroutine.
Instead, they should define their own AUTOLOAD subroutines along these lines:
use AutoLoader;
use Carp;
sub AUTOLOAD {
my $sub = $AUTOLOAD;
(my $constname = $sub) =~ s/.*:://;
my $val = constant($constname, @_ ? $_[0] : 0);
if ($! != 0) {
if ($! =~ /Invalid/ || $!{EINVAL}) {
$AutoLoader::AUTOLOAD = $sub;
goto &AutoLoader::AUTOLOAD;
}
else {
croak "Your vendor has not defined constant $constname";
}
}
*$sub = sub { $val }; # same as: eval "sub $sub { $val }";
goto &$sub;
}
If any module's own AUTOLOAD subroutine has no need to fallback to the
AutoLoader's AUTOLOAD subroutine (because it doesn't have any AutoSplit
subroutines), then that module should not use
AutoLoader at all.
Package lexicals declared with "my" in the main block of a package
using
AutoLoader will not be visible to auto-loaded subroutines, due to
the fact that the given scope ends at the "__END__" marker. A module
using such variables as package globals will not work properly under the
AutoLoader.
The "vars" pragma (see "vars" in perlmod) may be used in
such situations as an alternative to explicitly qualifying all globals with
the package namespace. Variables pre-declared with this pragma will be visible
to any autoloaded routines (but will not be invisible outside the package,
unfortunately).
You can stop using AutoLoader by simply
no AutoLoader;
The
AutoLoader is similar in purpose to
SelfLoader: both delay the
loading of subroutines.
SelfLoader uses the "__DATA__" marker rather than
"__END__". While this avoids the use of a hierarchy of disk files
and the associated open/close for each routine loaded,
SelfLoader
suffers a startup speed disadvantage in the one-time parsing of the lines
after "__DATA__", after which routines are cached.
SelfLoader
can also handle multiple packages in a file.
AutoLoader only reads code as it is requested, and in many cases should
be faster, but requires a mechanism like
AutoSplit be used to create
the individual files. ExtUtils::MakeMaker will invoke
AutoSplit
automatically if
AutoLoader is used in a module source file.
Sometimes, it can be necessary or useful to make sure that a certain function is
fully loaded by AutoLoader. This is the case, for example, when you need to
wrap a function to inject debugging code. It is also helpful to force early
loading of code before forking to make use of copy-on-write as much as
possible.
Starting with AutoLoader 5.73, you can call the
"AutoLoader::autoload_sub" function with the fully-qualified name of
the function to load from its
.al file. The behaviour is exactly the
same as if you called the function, triggering the regular
"AUTOLOAD" mechanism, but it does not actually execute the
autoloaded function.
AutoLoaders prior to Perl 5.002 had a slightly different interface. Any old
modules which use
AutoLoader should be changed to the new calling
style. Typically this just means changing a require to a use, adding the
explicit 'AUTOLOAD' import if needed, and removing
AutoLoader from
@ISA.
On systems with restrictions on file name length, the file corresponding to a
subroutine may have a shorter name that the routine itself. This can lead to
conflicting file names. The
AutoSplit package warns of these potential
conflicts when used to split a module.
AutoLoader may fail to find the autosplit files (or even find the wrong ones) in
cases where @INC contains relative paths,
and the program does
"chdir".
SelfLoader - an autoloader that doesn't use external files.
"AutoLoader" is maintained by the perl5-porters. Please direct any
questions to the canonical mailing list. Anything that is applicable to the
CPAN release can be sent to its maintainer, though.
Author and Maintainer: The Perl5-Porters <
[email protected]>
Maintainer of the CPAN release: Steffen Mueller <
[email protected]>
This package has been part of the perl core since the first release of perl5. It
has been released separately to CPAN so older installations can benefit from
bug fixes.
This package has the same copyright and license as the perl core:
Copyright (C) 1993, 1994, 1995, 1996, 1997, 1998, 1999,
2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009,
2011, 2012, 2013
by Larry Wall and others
All rights reserved.
This program is free software; you can redistribute it and/or modify
it under the terms of either:
a) the GNU General Public License as published by the Free
Software Foundation; either version 1, or (at your option) any
later version, or
b) the "Artistic License" which comes with this Kit.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See either
the GNU General Public License or the Artistic License for more details.
You should have received a copy of the Artistic License with this
Kit, in the file named "Artistic". If not, I'll be glad to provide one.
You should also have received a copy of the GNU General Public License
along with this program in the file named "Copying". If not, write to the
Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
MA 02110-1301, USA or visit their web page on the internet at
http://www.gnu.org/copyleft/gpl.html.
For those of you that choose to use the GNU General Public License,
my interpretation of the GNU General Public License is that no Perl
script falls under the terms of the GPL unless you explicitly put
said script under the terms of the GPL yourself. Furthermore, any
object code linked with perl does not automatically fall under the
terms of the GPL, provided such object code only adds definitions
of subroutines and variables, and does not otherwise impair the
resulting interpreter from executing any standard Perl script. I
consider linking in C subroutines in this manner to be the moral
equivalent of defining subroutines in the Perl language itself. You
may sell such an object file as proprietary provided that you provide
or offer to provide the Perl source, as specified by the GNU General
Public License. (This is merely an alternate way of specifying input
to the program.) You may also sell a binary produced by the dumping of
a running Perl script that belongs to you, provided that you provide or
offer to provide the Perl source as specified by the GPL. (The
fact that a Perl interpreter and your code are in the same binary file
is, in this case, a form of mere aggregation.) This is my interpretation
of the GPL. If you still have concerns or difficulties understanding
my intent, feel free to contact me. Of course, the Artistic License
spells all this out for your protection, so you may prefer to use that.