LimeUtil - control and update LMS7 based transceiver devices
LimeUtil [
OPTIONS]
LimeUtil is a tool to show information about and control LMS7 based
transceiver devices such as the LimeSDR. It can be used to update the firmware
and to calibrate the device.
- --help
- Print a help message.
- --info
- Print information about LimeSuite and found devices.
-
--find[="SPEC"]
- Discover available devices, restricted to those matching
the SPEC if given. If no matching devices are found it will exit
with exit status 1.
-
--make[="SPEC"]
- Create a device instance.
-
--args[="ARGS"]
- Supply arguments ARGS to the --update,
--fpga and --fw options.
- --update
- Download latest firmware and program it into the device
flash memory.
-
--fpga="FILE"
- Program FPGA firmware image in FILE to device flash
memory.
-
--fw="FILE"
- Program FX3 firmware image in FILE to device flash
memory.
- --timing
- Time interfaces and operations.
-
--cal[="ARGS"]
- Calibrate device. Use ARGS to select and configure
device.
-
--start=FREQ
- Start calibration sweep at frequency FREQ Hz.
-
--stop=EQ
- Stop calibration sweep at frequency FREQ Hz.
-
--step=STEP
- Step frequency during calibration sweep by STEP Hz
(default 1 MHz).
-
--bw=BW
- Set calibration bandwidth to BW Hz (default 30
MHz).
-
--dir=DIR
- Set calibration direction to DIR (one of RX, TX or
BOTH, default is BOTH).
-
--chans=CHANNELS
- Set calibration channels to CHANNELS (one of 0, 1 or
ALL, default is ALL).
LimeUtil is part of the
Lime
Suite
LimeSuiteGUI(1)