VBoxService - x86 virtualization solution
- VBoxService
- [-f|--foreground] [-v|--verbose] [-l|--logfile
<file>] [-i|--interval <seconds>] [--disable-<service>]
[--enable-<service>] [--only-<service>] [-h|-?|--help]
[--control-interval <ms>] [--control-procs-max-kept <x>]
[--control-procs-mem-std[in|out|err] <KB>] [--timesync-interval
<ms>] [--timesync-min-adjust <ms>] [--timesync-latency-factor
<x>] [--timesync-max-latency <ms>] [--timesync-set-threshold
<ms>] [--timesync-set-start] [--timesync-set-on-restore 0|1]
[--vminfo-interval <ms>]
-
-i | --interval
- The default interval.
-
-f | --foreground
- Don't daemonize the program. For debugging.
-
-l | --logfile <file>
- Enables logging to a file.
-
-v | --verbose
- Increment the verbosity level. For debugging.
-
-V | --version
- Show version information.
-
-h | -? | --help
- Show this message and exit with status 1.
- --enable-control
- Enables the control service. (default)
- --disable-control
- Disables the control service.
- --only-control
- Only enables the control service.
- --control-interval
- Specifies the interval at which to check for new control
commands. The default is 1000 ms.
- --control-procs-max-kept
- Specifies how many started guest processes are kept into
memory to work with. Default is 256.
- --enable-timesync
- Enables the timesync service. (default)
- --disable-timesync
- Disables the timesync service.
- --only-timesync
- Only enables the timesync service.
- --timesync-interval
- Specifies the interval at which to synchronize the time
with the host. The default is 10000 ms.
- --timesync-min-adjust
- The minimum absolute drift value measured in milliseconds
to make adjustments for. The default is 1000 ms on OS/2 and 100 ms
elsewhere.
- --timesync-latency-factor
- The factor to multiply the time query latency with to
calculate the dynamic minimum adjust time. The default is 8 times.
- --timesync-max-latency
- The max host timer query latency to accept. The default is
250 ms.
- --timesync-set-threshold
- The absolute drift threshold, given as milliseconds, where
to start setting the time instead of trying to adjust it. The default is
20 min.
- --timesync-set-start
- Set the time when starting the time sync service.
-
--timesync-set-on-restore 0|1
- Immediately set the time when the VM was restored. 1 = set
(default), 0 = don't set.
- --enable-vminfo
- Enables the vminfo service. (default)
- --disable-vminfo
- Disables the vminfo service.
- --only-vminfo
- Only enables the vminfo service.
- --vminfo-interval
- Specifies the interval at which to retrieve the VM
information. The default is 10000 ms.
- --enable-cpuhotplug
- Enables the cpuhotplug service. (default)
- --disable-cpuhotplug
- Disables the cpuhotplug service.
- --only-cpuhotplug
- Only enables the cpuhotplug service.
- --enable-memballoon
- Enables the memballoon service. (default)
- --disable-memballoon
- Disables the memballoon service.
- --only-memballoon
- Only enables the memballoon service.
- --enable-vmstats
- Enables the vmstats service. (default)
- --disable-vmstats
- Disables the vmstats service.
- --only-vmstats
- Only enables the vmstats service.
- --enable-automount
- Enables the automount service. (default)
- --disable-automount
- Disables the automount service.
- --only-automount
- Only enables the automount service.
- Copyright (C) 2009-2013 Oracle Corporation