airspyhf_rx - probe device and show configuration
The AirspyHF is a tiny and efficient software defined radio receiver.
This application lets the user probe the device and show configuration.
airspy_rx
Usage:
-
-r <filename>
- Receive data into the file; stdout emits values on standard
output
-
-s <serial number>
- Open device with specified 64bits serial number
-
-f <frequency>
- Set frequency in MHz between 9 kHz - 31 MHz or 60 - 260
MHz
-
-a <sample_rate>
- Set sample rate, at the moment only 768 kS/s supported
-
-n <#samples>
- Number of samples to transfer (default is unlimited)
- -d
- Verbose mode
- -w
- Receive data into file with WAV header and automatic name
This is for SDR# compatibility and may not work with other software It
works even with HDSDR
-
-g on|off
- HF AGC on / off
-
-l high|low
- HF AGC threshold high / low (when AGC On)
-
-t <value>
- HF attenuator value 0..8 (each step increases 6 dB the
attenuation)
-
-m on|off
- on to activate LNA (preamplifier): +6 dB gain - compensated
in digital.
- -z
- Do not attempt to use manual AGC/LNA commands (useful in
order to avoid errors with old firmware)
AirspyHF web page:
https://airspy.com/airspy-hf-plus
Other airspyhf programs:
,
airspyhf_gpio(1),
airspyhf_lib_version(1),
This manual page was written by Maitland Bottoms for the Debian project (but may
be used by others).
Copyright (c) 2020 A. Maitland Bottoms <
[email protected]>
This program is free software: you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free Software
Foundation, either version 2 of the License, or (at your option) any later
version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
A PARTICULAR PURPOSE. See the GNU General Public License for more
details.