ao-rawload - flash a program to a AltOS device
ao-rawload [-T
tty-device] [--tty
tty-device] [-D
altos-device] [--device
altos-device]
file.ihx
ao-rawload loads the specified .ihx file, without modification, into the
target device flash or ram (depending on the base address of the .ihx file).
- -T tty-device | --tty tty-device
- This selects which tty device the debugger uses to
communicate with the target device. The special name 'BITBANG' directs
ao-dbg to use the cp2103 connection, otherwise this should be a usb serial
port connected to a suitable cc1111 debug node.
- -D AltOS-device | --device AltOS-device
- Search for a connected device. This requires an argument of
one of the following forms:
- TeleMetrum:2
TeleMetrum
2
- Leaving out the product name will cause the tool to select
a suitable product, leaving out the serial number will cause the tool to
match one of the available devices.
- -r | --run
- After the file has been loaded, set the PC to the base
address of the image and resume execution there. the .ihx file.
ao-rawload reads the specified .ihx file into memory. It then connects to
the specified target device and writes the program to the target device memory
and, optionally, starts the program executing.
Keith Packard