blkcalc - Converts between unallocated disk unit numbers and regular disk unit
numbers.
blkcalc [-dsu unit_addr] [-vV] [-i imgtype] [-o imgoffset] [-b
dev_sector_size] [-f fstype] image [images]
blkcalc creates a disk unit number mapping between two images, one normal
and another that only contains the unallocated units of the first (the default
behavior of the
blkls(1) program). One of the
-d, -s, or
-u options must be given. If the
-d option is given, then the
unit_addr value is the disk unit address in the regular image (i.e.
from
dd ). If the unit is unallocated, its address in an unallocated
image is given. If the
-u option is given, then the
unit_addr
value is the disk unit address in the unallocated unit image (i.e. from
blkls(1) ). Its disk unit address in the original image is determined.
If the
-s option is given, then the
unit_addr value is the disk
unit address in the slack image (i.e. from blkls -s). The
image is the
full, original image (i.e. from dd).
blkcalc was called
dcalc in
TSK versions prior to 3.0.0.
- -f fstype
- Identify the File System type of the image. Use '-f list'
to list the supported file system types. If not given, autodetection
methods are used.
- -i imgtype
- Identify the type of image file, such as raw. Use '-i list'
to list the supported types. If not given, autodetection methods are
used.
- -o imgoffset
- The sector offset where the file system starts in the
image.
- -b dev_sector_size
- The size, in bytes, of the underlying device sectors. If
not given, the value in the image format is used (if it exists) or
512-bytes is assumed.
- -v
- Verbose output to STDERR.
- -V
- Display version.
- image [images]
- The disk or partition image to read, whose format is given
with '-i'. Multiple image file names can be given if the image is split
into multiple segments. If only one image file is given, and its name is
the first in a sequence (e.g., as indicated by ending in '.001'),
subsequent image segments will be included automatically.
This is useful when keyword searching an image generated by
blkls. This
allows one to identify the original unit address and provides better
documentation.
# blkcalc -u 64 images/wd0e
blkls(1),
Brian Carrier <carrier at sleuthkit dot org>
Send documentation updates to <doc-updates at sleuthkit dot org>