bluealsa-plugins

NAME

bluealsa-plugins - Bluetooth Audio ALSA Plugins

SYNOPSIS

BlueALSA permits applications to access Bluetooth audio devices using the ALSA alsa-lib API. Users of those applications can then use Bluetooth speakers, headphones, headsets and hands-free devices much as if they were local devices. This integration is achieved by two ALSA plugins, one for PCM audio streams and one for CTL volume controls.

PCM PLUGIN

The BlueALSA ALSA PCM plugin communicates with the bluealsa(8) service. It can be used to define ALSA PCMs in your own configuration file (e.g. ~/.asoundrc), or you can use the pre-defined bluealsa PCM.

The Predefined bluealsa PCM

The simplest way to use the PCM plugin is with the predefined ALSA PCM device bluealsa. The definition of this PCM device is of type plug so audio format conversion, if required, is done automatically by the PCM. It has parameters DEV, PROFILE, CODEC, VOL, SOFTVOL, DELAY, and SRV. All these parameters have defaults. Parameter values in an ALSA PCM name are specified using the syntax:

PCM Parameters

Setting Different Defaults

The defaults can be overridden by defining the ones you want to change in your own configuration (e.g. in ~/.asoundrc.conf) for example:

Positional Parameters

ALSA permits arguments to be given as positional parameters as an alternative to explicitly naming them. When using positional parameters it is important that the values are given in the correct sequence - DEV, PROFILE, CODEC, VOL, SOFTVOL, DELAY, SRV. For example:
When using positional parameters defaults can only be implied at the end of the id string, so
is equivalent to the full form above, but
is not permitted.

Defining BlueALSA PCMs

You can define your own ALSA PCM in the ALSA configuration. To do this, create an ALSA configuration node defining a PCM with type bluealsa. The configuration node has the following fields:
The device and profile fields must be specified so that the plugin can select the correct Bluetooth transport; the other fields are optional. Note that the default values for the optional fields are not overridden automatically by the configuration defaults.bluealsa.* in a PCM defined this way; however the configuration defaults can be referenced by use of @func refer (see the ALSA configuration file syntax documentation for more information). When choosing a name for your PCM definition, the name pcm.bluealsa is pre-defined by the bluez-alsa installation (see section The Predefined bluealsa PCM above), so it should not be used as a name for your own PCM devices as doing so will most likely have unexpected or undesirable results. Note that the volume field is of type string, so the value must be enclosed in double-quotes. See the PCM Parameters section above for more information on each field. Do not confuse the PCM type bluealsa with the PCM named bluealsa. The type does not perform any audio conversions, you will have to wrap your own defined PCMs with type plug to achieve that; whereas the predefined PCM pcm.bluealsa is of type plug.

Name Hints

Applications that follow ALSA guidelines will obtain the list of defined PCMs by using the alsa-lib namehints API. To make BlueALSA PCMs visible via that API it is necessary to add a "hint" section to the ALSA configuration. If you have defined a new PCM, then the hint goes into the PCM configuration entry as follows:
Now using aplay -L will include the following in its output:
If you are using the pre-defined bluealsa PCM, then you can create a "namehint" entry in your ~/.asoundrc file like this:
Then aplay -L shows
For alsa-lib versions before v1.2.3.2, a bug in the namehint parser means that a namehint.pcm entry has to be written as
(note the keyword DESC after the pipe symbol and before the description text.) With that hint in place, the PCM will be listed as both a Capture and Playback device. So arecord -L will also list it. That is generally OK for HFP/HSP devices, but an A2DP device most often offers only Capture (e.g. a mobile phone) or only Playback (e.g. a Bluetooth speaker). It is possible to use the hint description to limit the listing to only one direction using an undocumented syntax of ALSA configuration files. If the hint.description value ends with |IOIDInput the PCM will only show in listings of Capture devices; if it ends with |IOIDOutput the PCM will only show in listings of Playback devices. So we can modify our example above to:
or
Now the aplay -L output will be exactly the same as before, but arecord -L will not include bt-headphones in its output. When using the namehint.pcm method, the key (mybluealsadevice in the above example) must be unique but otherwise is not used. The first part of the value string, before the pipe | symbol, is the string that is to be passed to ALSA applications to identify the PCM (e.g. with aplay -D ...). The next section, after the pipe symbol, is the description that will be presented to the user. The optional |IOID section is not included in the description given to the application.

CTL PLUGIN

The BlueALSA ALSA CTL plugin can be used to define ALSA CTLs (mixer devices) in your own configuration file (e.g. ~/.asoundrc), or you can use the pre-defined configuration that is included in the bluez-alsa project. A BlueALSA CTL device has no associated soundcard, so alsamixer will not list it in its F6 menu. It can be selected either by starting alsamixer with
or by selecting "enter device name .." on the F6 menu then typing out "bluealsa" in the "Device Name" box. The CTL has two operating modes, Default mode and Single Device mode.

Default Mode

In this mode when a device connects, the mixer will create new controls for it, and when a device disconnects, the mixer will remove its controls. alsamixer(1) will show these changes dynamically. Control names are constructed by combining the device Bluetooth alias with either the profile type ('A2DP' or 'SCO') of the controlled PCM or the word "Battery" for battery level indicators. If two or more connected devices have the same alias then an index number is added to the name to make it unique. The Bluetooth "alias" of a device is by default the same as its "name". The name is a string defined by the device manufacturer and embedded in its firmware. Typically two identical devices will have identical names. The "alias" is created by BlueZ and stored locally on the host computer. So the alias can be changed using a tool such as bluetoothctl(1) to make it unique if desired. As manufacturers tend to use long names for their devices the alias can also be useful to give a short "nickname" to a device. Although this default mode works well with alsamixer, there are some limitations that may make it unsuitable for some applications. In particular:

Single Device Mode

The BlueALSA CTL also implements an alternative mode that presents controls only for one specified device. In this case the control names are simply the profile type of the controlled PCM ('A2DP' or 'SCO') or the word "Battery". There is never any need for index suffixes or device alias. Immediately this overcomes the two main issues of the default mode. Single device mode is achieved by including the device Bluetooth address as an argument to the ALSA device id, for example:
A notable difference between single-device mode and the default mode is in the cases of the device not being connected when the mixer is opened, and when the device disconnects while the mixer is open. For the default mode, the mixer will still open, even if no devices are connected, but will display no controls. In single device mode the open request will fail with an error message. Similarly, in default mode when a device disconnects the mixer remains open but removes the set of controls and creates a new control set without the disconnected device. That new set will be empty if no devices remain. If the device then re-connects the mixer will again create a new set of controls with the newly connected device included. In single device mode when its device disconnects then the mixer will close. The alsamixer application will continue running with no associated device or controls, but will not automatically re-open the mixer if the device re-connects. The user can use F6 to open a new device. As a special case, a single device mixer can be opened with the address 00:00:00:00:00:00. This will create a mixer with controls for the most recently connected device at the time the mixer is opened. Once created, that mixer behaves the same as if it had been opened with the actual address of the device: it does not change to a new device if another is subsequently connected.

The Predefined bluealsa CTL

The bluealsa CTL has parameters DEV, BAT, and SRV. All the parameters have defaults.

CTL Parameters

The default values can be overridden in the ALSA configuration, for example:

Defining BlueALSA CTLs

You can define your own ALSA CTL in the ALSA configuration. To do this, create an ALSA configuration node defining a CTL with type bluealsa. The configuration node has the following fields:
All the fields (except type) are optional. See the CTL Parameters section above for more information on each field. Note that the battery default value is no when used in this way. As for PCM definitions above, the default values for the optional fields are hard-coded into the plugin; they are not overridden by the configuration defaults.bluealsa. settings.

FILES

SEE ALSO

alsamixer(1), aplay(1), bluealsa(8), bluetoothctl(1), bluetoothd(8)

COPYRIGHT

Copyright (c) 2016-2021 Arkadiusz Bokowy. The bluez-alsa project is licensed under the terms of the MIT license.