man - an interface to the system reference manuals
man [
man options] [[
section]
page ...] ...
man -k [
apropos options]
regexp ...
man -K [
man options] [
section]
term ...
man -k [
apropos tilvalg]
regexp ...
man -l [
man options]
file ...
man -w|
-W [
man options]
page ...
man is the system's manual pager. Each
page argument given to
man is normally the name of a program, utility or function. The
manual page associated with each of these arguments is then found and
displayed. A
section, if provided, will direct
man to look only
in that
section of the manual. The default action is to search in all
of the available
sections following a pre-defined order (see
DEFAULTS), and to show only the first
page found, even if
page exists in several
sections.
Tabellen nedenfor viser
section-antallet af manualen efterfulgt af typen
af sider de indeholder.
| 1 |
Kørbare programmer eller skalkommandoer |
| 2 |
Systemkald (funktioner stillet til rådighed af kernen) |
| 3 |
Bibliotekskald (funktioner i programbiblioteker) |
| 4 |
Specielle filer (normalt fundet i /dev) |
| 5 |
File formats and conventions, e.g. /etc/passwd
|
| 6 |
Spil |
| 7 |
Miscellaneous (including macro packages and conventions), e.g.
man(7), groff(7), man-pages(7) |
| 8 |
Kommandoer til systemadministration (normalt kun for root) |
| 9 |
Kernerutiner [Ikkestandard] |
En manualside består af flere afsnit.
Konventionelle afsnitsnavne inkluderer
NAVN,
SYNOPSIS,
KONFIGURATION,
BESKRIVELSE,
TILVALG,
AFSLUT-STATUS,
RETURVÆRDI,
FEJL,
MILJØ,
FILER,
VERSIONER,
KONFORMERER TIL,
NOTER,
FEJL,
EKSEMPEL,
FORFATTERE, og
SE
OGSÅ.
De følgende konventioner gælder for afsnittet
SYNOPSIS og
kan bruges som en vejledning i andre afsnit.
| fed tekst |
skriv præcis som vist. |
| kursiv |
erstat med passende argument. |
| [-abc] |
et eller alle argumenter inden i [ ] er valgfrie. |
|
-a|-b
|
tilvalg afgrænset af | kan ikke bruges sammen. |
|
argument ... |
argument kan gentages. |
| [udtryk] ... |
hele udtrykket indenfor [ ] kan gentages. |
Præcis optegning kan afhænge af uddataenheden. For eksempel vil
man normalt ikke kunne optegne kursiv når man befinder sig i en manual,
og man vil normalt bruge understregning eller farvelagt tekst i stedet for.
The command or function illustration is a pattern that should match all possible
invocations. In some cases it is advisable to illustrate several exclusive
invocations as is shown in the
SYNOPSIS section of this manual page.
-
man ls
- Vis manualsiden for punkt (program) ls.
-
man man.7
- Display the manual page for macro package man from
section 7. (This is an alternative spelling of " man
7 man".)
-
man 'man(7)'
- Display the manual page for macro package man from
section 7. (This is another alternative spelling of "
man 7 man". It may be more convenient when copying and
pasting cross-references to manual pages. Note that the parentheses must
normally be quoted to protect them from the shell.)
-
man -a intro
- Vis, i rækkefølge, alle de
tilgængelige intro-manualsider indeholdt i denne manual. Det
er muligt at afbryde mellem successive visninger eller udelade nogle af
dem.
-
man -t bash | lpr -Pps
- Format the manual page for bash into the default
troff or groff format and pipe it to the printer named
ps. The default output for groff is usually PostScript.
man --help should advise as to which processor is bound to the
-t option.
-
man -l -Tdvi ./foo.1x.gz >
./foo.1x.dvi
- This command will decompress and format the nroff source
manual page ./foo.1x.gz into a device independent (dvi)
file. The redirection is necessary as the -T flag causes output to
be directed to stdout with no pager. The output could be viewed
with a program such as xdvi or further processed into PostScript
using a program such as dvips.
-
man -k printf
- Søg i de korte beskrivelser og navnene på
manualsiderne for nøgleordet printf som regulært
udtryk. Udskriv resultaterne. Svarer til
apropos printf .
-
man -f smail
- Slå manualsiderne refereret af smail op og
vis den korte beskrivelse for det fundne resultat. Svarer til
whatis smail.
Mange tilvalg er tilgængelige for
man for at give så meget
fleksibilitet som muligt for slutbrugeren. Ændringer kan ske for
søgestien, afsnitrækkefølge, uddataprocessor og anden
opførsel og operationer detaljeret nedenfor.
If set, various environment variables are interrogated to determine the
operation of
man. It is possible to set the "catch-all"
variable $
MANOPT to any string in command line format, with the
exception that any spaces used as part of an option's argument must be escaped
(preceded by a backslash).
man will parse $
MANOPT prior to
parsing its own command line. Those options requiring an argument will be
overridden by the same options found on the command line. To reset all of the
options set in $
MANOPT,
-D can be specified as the initial
command line option. This will allow man to "forget" about the
options specified in $
MANOPT, although they must still have been
valid.
Manual pages are normally stored in
nroff(1) format under a directory
such as
/usr/share/man. In some installations, there may also be
preformatted
cat pages to improve performance. See
manpath(5)
for details of where these files are stored.
This package supports manual pages in multiple languages, controlled by your
locale. If your system did not set this up for you automatically, then
you may need to set $
LC_MESSAGES, $
LANG, or another
system-dependent environment variable to indicate your preferred locale,
usually specified in the
POSIX format:
<
language>[
_<
territory>[
.<
tegnsæt>[
,<
version>]]]
Hvis den ønskede side er tilgængelig i dit
sprog, vil den
blive vist i stedet for standardsiden (normalt amerikansk-engelsk).
If you find that the translations supplied with this package are not available
in your native language and you would like to supply them, please contact the
maintainer who will be coordinating such activity.
Individual manual pages are normally written and maintained by the maintainers
of the program, function, or other topic that they document, and are not
included with this package. If you find that a manual page is missing or
inadequate, please report that to the maintainers of the package in question.
For information om andre funktioner og udvidelser tilgængelige med denne
manualtekstviser, så læs venligst dokumenterne leveret med denne
pakke.
The order of sections to search may be overridden by the environment variable $
MANSECT or by the
SECTION directive in
/etc/manpath.config. By default it is as follows:
1 n l 8 3 0 2 3type 3posix 3pm 3perl 3am 5 4 9
6 7
The formatted manual page is displayed using a
pager. This can be
specified in a number of ways, or else will fall back to a default (see option
-P for details).
Filtrene tydes vis et antal metoder. Først tydes kommandolinjetilvalget
-p eller miljøvariablen $
MANROFFSEQ. Hvis
-p ikke
blev brugt og miljøvariablen ikke var angivet, så fortolkes
opstartslinjen for nroff-filen for en forbrænderstrenge. For at
indeholde en gyldig forbrænderstreng, så skal den første
linje ligne
'\" <
string>
Hvor
streng kan være enhver kombination af bogstaver beskrevet af
tilvalget
-p nedenfor.
Hvis ingen af de ovenstående metoder giver filterinformation, så
bruges et standardsæt.
A formatting pipeline is formed from the filters and the primary formatter (
nroff or [
tg]
roff with
-t) and executed.
Alternatively, if an executable program
mandb_nfmt (or
mandb_tfmt with
-t) exists in the man tree root, it is executed
instead. It gets passed the manual source file, the preprocessor string, and
optionally the device specified with
-T or
-E as arguments.
Non-argument options that are duplicated either on the command line, in $
MANOPT, or both, are not harmful. For options that require an argument,
each duplication will override the previous argument value.
-
-C fil, --config-file=fil
- Brug denne brugerkonfigurationsfil frem for standarden
~/.manpath.
-
-d, --debug
- Vis fejlsøgningsinformation.
-
-D, --default
- Dette tilvalg udstedes normalt som det første
tilvalg og nulstiller man's opførsel til standarden. Dets
brug er at nulstille disse tilvalg, som måske er angivet i $
MANOPT. Ethvert tilvalg som følger -D vil have deres
normale effekt.
-
--warnings[=advarsler]
- Aktiver advarsler fra groff. Dette kan gøres
for at udføre sanitetskontrol på kildetekst for manualsider.
advarsler er en kommaadskilt liste med advarselsnavne; hvis den
ikke er angivet, er standarden »mac«. Se
“Warnings” node i info groff for en liste over
tilgængelige advarselsnavne.
-
-f, --whatis
- Svarer til whatis. Vis en kort beskrivelse fra
manualsiden, hvis tilgængelig. Se whatis(1) for
detaljer.
-
-k, --apropos
- Svarer til apropos. Søg i de korte
manualsidebeskrivelser for nøgleord og vis alle match. Se
apropos(1) for detaljer.
-
-K, --global-apropos
- Search for text in all manual pages. This is a brute-force
search, and is likely to take some time; if you can, you should specify a
section to reduce the number of pages that need to be searched. Search
terms may be simple strings (the default), or regular expressions if the
--regex option is used.
- Note that this searches the sources of the manual
pages, not the rendered text, and so may include false positives due to
things like comments in source files. Searching the rendered text would be
much slower.
-
-l, --local-file
- Activate "local" mode. Format and display local
manual files instead of searching through the system's manual collection.
Each manual page argument will be interpreted as an nroff source file in
the correct format. No cat file is produced. If '-' is listed as one of
the arguments, input will be taken from stdin. When this option is not
used, and man fails to find the page required, before displaying the error
message, it attempts to act as if this option was supplied, using the name
as a filename and looking for an exact match.
-
-w, --where, --path,
--location
- Don't actually display the manual page, but do print the
location of the source nroff file that would be formatted. If the
-a option is also used, then print the locations of all source
files that match the search criteria.
-
-W, --where-cat, --location-cat
- Don't actually display the manual page, but do print the
location of the preformatted cat file that would be displayed. If the
-a option is also used, then print the locations of all
preformatted cat files that match the search criteria.
- If -w and -W are both used, then print both
source file and cat file separated by a space. If all of -w,
-W, and -a are used, then do this for each possible
match.
-
-c, --catman
- Dette tilvalg er ikke for generel brug og bør kun
bruges af programmet catman.
-
-R kodning, --recode=kodning
- Instead of formatting the manual page in the usual way,
output its source converted to the specified encoding. If you
already know the encoding of the source file, you can also use
manconv(1) directly. However, this option allows you to convert
several manual pages to a single encoding without having to explicitly
state the encoding of each, provided that they were already installed in a
structure similar to a manual page hierarchy.
- Consider using man-recode(1) instead for converting
multiple manual pages, since it has an interface designed for bulk
conversion and so can be much faster.
-
-L sprog, --locale=sprog
-
man vil normalt bestemme dit lokale sprog med et
kald til C-funktionen setlocale(3), som undersøger diverse
miljøvariabler, muligvis inklusive $ LC_MESSAGES og
$LANG. For midlertidigt at overskrive den afslørede
værdi bruges dette tilvalg til at supplere en sprog-streng
direkte til man. Bemærk at det ikke vil træde i kraft
før søgningen efter sider rent faktisk begynder. Resultatet
såsom hjælpebeskeden vil altid blive vist i det oprindeligt
bestemte sprog.
-
-m system[,...],
--systems=system[,...]
- If this system has access to other operating systems'
manual pages, they can be accessed using this option. To search for a
manual page from NewOS's manual page collection, use the option -m
NewOS.
Det angivet system kan være en kombination af kommaadskilt
operativsystemnavne. For at inkludere en søgning i manualsiderne
for udgangspunktets operativsystem inkluderes systemnavnet man i
argumentstrengen. Dette tilvalg vil overskrive miljøvariablen $
SYSTEM.
-
-M sti, --manpath=sti
- Angiv en alternativ manualsti. Som standard bruger
man manpath-afledt kode til at bestemme søgestien.
Dette tilvalg overskriver miljøvariablen $ MANPATH og
medfører at tilvalget -m ignoreres.
A path specified as a manpath must be the root of a manual page hierarchy
structured into sections as described in the man-db manual (under
"The manual page system"). To view manual pages outside such
hierarchies, see the -l option.
-
-S list, -s list,
--sections= list
- The given list is a colon- or comma-separated list
of sections, used to determine which manual sections to search and in what
order. This option overrides the $ MANSECT environment variable.
(The -s spelling is for compatibility with System V.)
-
-e sub-extension, --extension=sub-extension
- Some systems incorporate large packages of manual pages,
such as those that accompany the Tcl package, into the main manual
page hierarchy. To get around the problem of having two manual pages with
the same name such as exit(3), the Tcl pages were usually
all assigned to section l. As this is unfortunate, it is now
possible to put the pages in the correct section, and to assign a specific
"extension" to them, in this case, exit(3tcl). Under
normal operation, man will display exit(3) in preference to
exit(3tcl). To negotiate this situation and to avoid having to know
which section the page you require resides in, it is now possible to give
man a sub-extension string indicating which package the page
must belong to. Using the above example, supplying the option
-e tcl to man will restrict the search to pages
having an extension of *tcl.
-
-i, --ignore-case
- Ignore case when searching for manual pages. This is the
default.
-
-I, --match-case
- Search for manual pages case-sensitively.
- --regex
- Show all pages with any part of either their names or their
descriptions matching each page argument as a regular expression,
as with apropos(1). Since there is usually no reasonable way to
pick a "best" page when searching for a regular expression, this
option implies -a.
- --wildcard
- Show all pages with any part of either their names or their
descriptions matching each page argument using shell-style
wildcards, as with apropos(1) --wildcard. The page
argument must match the entire name or description, or match on word
boundaries in the description. Since there is usually no reasonable way to
pick a "best" page when searching for a wildcard, this option
implies -a.
- --names-only
- Hvis enten tilvalget --regex eller --wildcard
bruges, match kun sidenavne, ikke sidebeskrivelser, som med
whatis(1). Ellers, ingen effekt.
-
-a, --all
- Som standard vil man afslutte efter visning af den
mest egnet manualside den finder. Brug af dette tilvalg tvinger man
til at vise alle manualsiderne med navne som matcher
søgekriteriet.
-
-u, --update
- This option causes man to update its database caches
of installed manual pages. This is only needed in rare situations, and it
is normally better to run mandb(8) instead.
- --no-subpages
- By default, man will try to interpret pairs of
manual page names given on the command line as equivalent to a single
manual page name containing a hyphen or an underscore. This supports the
common pattern of programs that implement a number of subcommands,
allowing them to provide manual pages for each that can be accessed using
similar syntax as would be used to invoke the subcommands themselves. For
example:
$ man -aw git diff
/usr/share/man/man1/git-diff.1.gz
For at deaktivere denne opførsel så brug tilvalget
--no-subpages.
$ man -aw --no-subpages git diff
/usr/share/man/man1/git.1.gz
/usr/share/man/man3/Git.3pm.gz
/usr/share/man/man1/diff.1.gz
-
-P tekstviser, --pager=tekstviser
- Specify which output pager to use. By default, man
uses pager, falling back to cat if pager is not found
or is not executable. This option overrides the $ MANPAGER
environment variable, which in turn overrides the $ PAGER
environment variable. It is not used in conjunction with -f or
-k.
The value may be a simple command name or a command with arguments, and may
use shell quoting (backslashes, single quotes, or double quotes). It may
not use pipes to connect multiple commands; if you need that, use a
wrapper script, which may take the file to display either as an argument
or on standard input.
-
-r prompt, --prompt=prompt
- Hvis en nylig version af less bruges som
tekstsøger, så vil man forsøge at angive den
på sin prompt og vælge nogle fornuftige tilvalg.
Standardprompten ser således ud
Manualside navn(sec) line x
hvor navn benvæner manualsidenavnet, sektion
benævner sektionen den blev fundet under og x det
nuværende linjenummer. Dette opnås ved at bruge
miljøvariablen $ LESS.
Supplying -r with a string will override this default. The string may
contain the text $MAN_PN which will be expanded to the name of the
current manual page and its section name surrounded by "(" and
")". The string used to produce the default could be expressed
as
\ Manual\ page\ \$MAN_PN\ ?ltline\ %lt?L/%L.:
byte\ %bB?s/%s..?\ (END):?pB\ %pB\\%..
(tryk h for hjælp eller q for afslut)
It is broken into three lines here for the sake of readability only. For its
meaning see the less(1) manual page. The prompt string is first
evaluated by the shell. All double quotes, back-quotes and backslashes in
the prompt must be escaped by a preceding backslash. The prompt string may
end in an escaped $ which may be followed by further options for less. By
default man sets the -ix8 options.
The $ MANLESS environment variable described below may be used to set
a default prompt string if none is supplied on the command line.
-
-7, --ascii
- When viewing a pure ascii(7) manual page on a 7 bit
terminal or terminal emulator, some characters may not display correctly
when using the latin1(7) device description with GNU
nroff. This option allows pure ascii manual pages to be
displayed in ascii with the latin1 device. It will not
translate any latin1 text. The following table shows the
translations performed: some parts of it may only be displayed properly
when using GNU nroff's latin1(7) device.
| Beskrivelse |
Oktal |
latin1 |
ascii |
|
| continuation hyphen |
255 |
‐ |
- |
| bullet (middle dot) |
267 |
• |
o |
| acute accent |
264 |
´ |
' |
| multiplication sign |
327 |
× |
x |
If the latin1 column displays correctly, your terminal may be set up
for latin1 characters and this option is not necessary. If the
latin1 and ascii columns are identical, you are reading this
page using this option or man did not format this page using the
latin1 device description. If the latin1 column is missing
or corrupt, you may need to view manual pages with this option.
This option is ignored when using options -t, -H, -T,
or -Z and may be useless for nroff other than
GNU's.
-
-E kodning, --encoding=kodning
- Generate output for a character encoding other than the
default. For backward compatibility, encoding may be an
nroff device such as ascii, latin1, or utf8 as
well as a true character encoding such as UTF-8.
-
--no-hyphenation, --nh
- Normally, nroff will automatically hyphenate text at
line breaks even in words that do not contain hyphens, if it is necessary
to do so to lay out words on a line without excessive spacing. This option
disables automatic hyphenation, so words will only be hyphenated if they
already contain hyphens.
If you are writing a manual page and simply want to prevent nroff
from hyphenating a word at an inappropriate point, do not use this option,
but consult the nroff documentation instead; for instance, you can
put "\%" inside a word to indicate that it may be hyphenated at
that point, or put "\%" at the start of a word to prevent it
from being hyphenated.
-
--no-justification, --nj
- Normally, nroff will automatically justify text to
both margins. This option disables full justification, leaving justified
only to the left margin, sometimes called "ragged-right" text.
If you are writing a manual page and simply want to prevent nroff
from justifying certain paragraphs, do not use this option, but consult
the nroff documentation instead; for instance, you can use the
".na", ".nf", ".fi", and ".ad"
requests to temporarily disable adjusting and filling.
-
-p streng, --preprocessor=streng
- Specify the sequence of preprocessors to run before
nroff or troff/groff. Not all installations will have
a full set of preprocessors. Some of the preprocessors and the letters
used to designate them are: eqn (e), grap (g),
pic (p), tbl (t), vgrind (v),
refer (r). This option overrides the $MANROFFSEQ
environment variable. zsoelim is always run as the very first
preprocessor.
-
-t, --troff
- Brug groff -mandoc til at formatere manualsiden til
standardud. Tilvalget er ikke krævet sammen med -H,
-T eller -Z.
-
-T[enhed],
--troff-device[=enhed]
- Denne indstilling bruges til at ændre
groff-resultater (eller muligvis troff'er), så de er
egnet for en enhed udover standarden. -t er underforstået.
Eksempler (indeholdt med Groff-1.17) inkluderer dvi, latin1,
ps, utf8, X75 og X100.
-
-H[browser],
--html[=browser]
- This option will cause groff to produce HTML output,
and will display that output in a web browser. The choice of browser is
determined by the optional browser argument if one is provided, by
the $ BROWSER environment variable, or by a compile-time default if
that is unset (usually lynx). This option implies -t, and
will only work with GNU troff.
-
-X[dpi], --gxditview[=dpi]
- This option displays the output of groff in a
graphical window using the gxditview program. The dpi (dots
per inch) may be 75, 75-12, 100, or 100-12, defaulting to 75; the -12
variants use a 12-point base font. This option implies -T with the
X75, X75-12, X100, or X100-12 device respectively.
-
-Z, --ditroff
-
groff vil køre troff og så
bruge en passende efterbrænder til at fremstille et resultat egnet
for den valgte enhed. Hvis groff -mandoc er groff, så
vil dette tilvalg sendes til groff og vil undertrykke brugen af en
efterbrænder. -t er underforstået.
-
-?, --help
- Vis en hjælpebesked og afslut.
- --usage
- Vis en kort hjælpebesked og afslut.
-
-V, --version
- Vis versionsinformation.
- 0
- Programkørsel endt uden fejl.
- 1
- Brugs-, syntaks- eller konfigurationsfilfejl.
- 2
- Operationel fejl.
- 3
- En underproces returnerede en afslutningsstatus forskellig
fra nul.
- 16
- Mindst en af siderne/filerne/nøgleordene fandtes
ikke eller blev ikke matchet.
- MANPATH
- If $MANPATH is set, its value is used as the path to
search for manual pages.
See the SEARCH PATH section of manpath(5) for the default
behaviour and details of how this environment variable is handled.
- MANROFFOPT
- Every time man invokes the formatter (nroff,
troff, or groff), it adds the contents of $
MANROFFOPT to the formatter's command line.
- MANROFFSEQ
- If $MANROFFSEQ is set, its value is used to
determine the set of preprocessors to pass each manual page through. The
default preprocessor list is system dependent.
- MANSECT
- If $MANSECT is set, its value is a colon-delimited
list of sections and it is used to determine which manual sections to
search and in what order. The default is "1 n l 8 3 0 2 3type 3posix
3pm 3perl 3am 5 4 9 6 7", unless overridden by the SECTION
directive in /etc/manpath.config.
-
MANPAGER, PAGER
- If $MANPAGER or $PAGER is set
($MANPAGER is used in preference), its value is used as the name of
the program used to display the manual page. By default, pager is
used, falling back to cat if pager is not found or is not
executable.
The value may be a simple command name or a command with arguments, and may
use shell quoting (backslashes, single quotes, or double quotes). It may
not use pipes to connect multiple commands; if you need that, use a
wrapper script, which may take the file to display either as an argument
or on standard input.
- MANLESS
- If $MANLESS is set, its value will be used as the
default prompt string for the less pager, as if it had been passed
using the -r option (so any occurrences of the text $MAN_PN
will be expanded in the same way). For example, if you want to set the
prompt string unconditionally to “my prompt string”, set $
MANLESS to
‘-Psmy prompt string’. Using the
-r option overrides this environment variable.
- BROWSER
- If $BROWSER is set, its value is a colon-delimited
list of commands, each of which in turn is used to try to start a web
browser for man --html. In each command, %s is
replaced by a filename containing the HTML output from groff,
%% is replaced by a single percent sign (%), and %c is
replaced by a colon (:).
- SYSTEM
- Hvis $SYSTEM er angivet, vil det have den samme
effekt, som hvis den var blevet angivet som argument for tilvalget
-m.
- MANOPT
- If $MANOPT is set, it will be parsed prior to
man's command line and is expected to be in a similar format. As
all of the other man specific environment variables can be
expressed as command line options, and are thus candidates for being
included in $ MANOPT it is expected that they will become obsolete.
N.B. All spaces that should be interpreted as part of an option's argument
must be escaped.
- MANWIDTH
- If $MANWIDTH is set, its value is used as the line
length for which manual pages should be formatted. If it is not set,
manual pages will be formatted with a line length appropriate to the
current terminal (using the value of $ COLUMNS, and ioctl(2)
if available, or falling back to 80 characters if neither is available).
Cat pages will only be saved when the default formatting can be used, that
is when the terminal line length is between 66 and 80 characters.
- MAN_KEEP_FORMATTING
- Normally, when output is not being directed to a terminal
(such as to a file or a pipe), formatting characters are discarded to make
it easier to read the result without special tools. However, if $
MAN_KEEP_FORMATTING is set to any non-empty value, these formatting
characters are retained. This may be useful for wrappers around man
that can interpret formatting characters.
- MAN_KEEP_STDERR
- Normally, when output is being directed to a terminal
(usually to a pager), any error output from the command used to produce
formatted versions of manual pages is discarded to avoid interfering with
the pager's display. Programs such as groff often produce
relatively minor error messages about typographical problems such as poor
alignment, which are unsightly and generally confusing when displayed
along with the manual page. However, some users want to see them anyway,
so, if $ MAN_KEEP_STDERR is set to any non-empty value, error
output will be displayed as usual.
- MAN_DISABLE_SECCOMP
- On Linux, man normally confines subprocesses that
handle untrusted data using a seccomp(2) sandbox. This makes it
safer to run complex parsing code over arbitrary manual pages. If this
goes wrong for some reason unrelated to the content of the page being
displayed, you can set $ MAN_DISABLE_SECCOMP to any non-empty value
to disable the sandbox.
- PIPELINE_DEBUG
- If the $PIPELINE_DEBUG environment variable is set
to "1", then man will print debugging messages to
standard error describing each subprocess it runs.
-
LANG, LC_MESSAGES
- Afhængig af system og implementering, vil enten en
af eller begge $ LANG og $ LC_MESSAGES blive spurgt for den
aktuelle beskeds sprog. man vil vise dets beskeder i det sprog
(hvis tilgængeligt). Se setlocale(3) for mere
udførlige detaljer.
- /etc/manpath.config
- konfigurationsfil for man-db.
- /usr/share/man
- Et globalt manualsidehierarki.
apropos(1),
groff(1),
less(1),
manpath(1),
nroff(1),
troff(1),
whatis(1),
zsoelim(1),
manpath(5),
man(7),
catman(8),
mandb(8)
Documentation for some packages may be available in other formats, such as
info(1) or HTML.
1990, 1991 – oprindelig skrevet af John W. Eaton (
[email protected]).
23. dec 1992: Rik Faith (
[email protected]) anvendte fejlrettelser af Willem
Kasdorp (
[email protected]).
30th April 1994 – 23rd February 2000: Wilf. (
[email protected])
has been developing and maintaining this package with the help of a few
dedicated people.
30. oktober 1996 – 30. marts 2001: Fabrizio Polacco
<
[email protected]> vedligeholdte og forberedte denne pakke for
Debianprojektet med hjælp fra hele fællesskabet.
31. marts 2001 – til i dag: Colin Watson <
[email protected]>
udvikler og vedligeholder nu man-db.
https://gitlab.com/man-db/man-db/-/issues
https://savannah.nongnu.org/bugs/?group=man-db