dupload.conf

NAME

dupload.conf - configuration file for dupload

DESCRIPTION

The configuration file is rather straight forward Perl code as it is included by the dupload script via "do $config". The config file is read as Perl code! Any dupload.conf must begin with "package config;" because "config" is the namespace expected by dupload. For examples of the configuration please refer to the global configuration file /etc/dupload.conf. It contains associative arrays, each indexed by the nickname (see --to option of dupload), for the following items:

fqdn [required]

The fully qualified domain name (FQDN) of the nickname. For the copy method, this option is ignored and the local FQDN will be used instead.

method [optional]

The transfer method. The available methods are:

login [optional]

The account name used to log into the remote host. For ftp the default is anonymous, which should work with firewall logins too. For scp, scpb and rsync the default is delegated to SSH and its own configuration. For http and https there is no default.

passwordcmd [optional] (since 2.9.9)

The command to retrieve a password. It is expected to output the password on stdout. If this option has not been specified, and the secret-tool program is installed, the following command will be used to retrieve the password from a system secrets store via the Secret Service interface:
secret-tool lookup host host user user service dupload If the command fails, then the password will be requested from a prompt.

password [optional]

The FTP password for anonymous logins.

filemode [optional] (since 2.9.1)

The destination files mode, in octal. If the value is undef, the mode will not be modified. The default is 0644.

incoming [required]

Incoming directory, the directory we try to upload to.

queuedir [optional]

The directory we move the uploaded files to (after successful upload to incoming. Usually necessary only with some special upload queues.

distallowlist [optional] (since 2.9.6)

The regex of the distributions allowed for this host. This check is done against the Distribution field in the .changes file.

distwhitelist [optional, deprecated] (since 2.9.3)

Deprecated alias for distallowlist.

distblocklist [optional] (since 2.9.6)

The regex of the distributions blocked for this host. This check is done against the Distribution field in the .changes file.

distblacklist [optional, deprecated] (since 2.9.3)

Deprecated alias for distblocklist.

mail [optional] (since 2.9.9)

The email addresses ("to" and "cc") where the announcement about the upload for the "match" distribution should be sent. This is an array of hashes with the following keys:

mailto [optional, deprecated]

Deprecated alias for:

  $cfg{$host}{mail} = [ {
      match => qr/^stable/,
      to => $mailto,
  } ];
    

mailtx [optional, deprecated]

Deprecated alias for:

  $cfg{$host}{mail} = [ {
      match => qr/^(?:unstable|experimental)/,
      to => $mailtx,
  } ];
    

cc [optional, deprecated]

Deprecated alias for:

  $cfg{$host}{mail} = [ {
      match => ...,
      to => ...,
      cc => $cc,
  } ];
    

fullname [optional]

Your full name, one that should appear in the announcement. If you leave this setting empty, the default will depend on your mail system. Usually the full name will be copied from the GCOS field in /etc/passwd.

visibleuser [optional]

Your username that should appear in the announcement. Defaults to "getlogin()".

visiblename [optional]

The host/domain name that appears as the part to the right of the @ character in the from-part of the announcement. Defaults to the value your local MTA likes.

passive [optional] (since 2.0)

Set the passive mode for FTP transfers. Since dupload uses Net::FTP, you can also use the environment variable FTP_PASSIVE.

options [optional] (since 2.6.3.1)

String that will be added verbatim to the command line of any scp or rsync calls done.

dinstall_runs [optional] (since 2.1)

Tells dupload that the remote host runs dinstall (or equivalent) so that dupload will not send a duplicate announcement mail. The default is 0 (false), set it to 1 to enable it.

archive [optional] (since 2.0)

If set to 0 (false), adds a X-No-Archive: yes header in the announcement. The default is 1 (true).

The configuration files also contain the following global variables:

default_host [optional] (since 2.1)

The default host to upload to. The default value of this variable is set depending on the current vendor, but if there is no configuration for that vendor it will be left unset.

mta [optional] (since 2.9.8)

The pathname to a sendmail compatible MTA. The MTA specified must support the -f option to set the envelope sender address, and the -F option to set the sender's full name. The default is /usr/sbin/sendmail.

no_parentheses_to_fullname [optional] (since 2.1)

Prevents dupload to add parentheses around the full name when making mail announcements. Default is 0 (false), set it to 1 to enable it.

HOOKS

Hooks are a powerful way to add actions which will be run before or after a dupload (like the preinst and postinst script of dpkg). You have two sorts of hooks: pre-upload and post-upload. Both are simple shell commands (executed by "sh -c" so you can use any shell tricks). Pre-uploads are always run (even in dry mode) and stop dupload if they fail (failure being measured by the hook's exit status). Post-uploads are only run when you are not in dry mode and only if the uploading succeeded. Both sorts of hooks are run for a given category: changes, sourcepackage, package, file or deb.

changes

This hook is run once per changes file (given as an argument to dupload) with the filename as its parameter.

sourcepackage

This hook is run once per changes file with the source package name and its version as its two parameters.

package

This hook is run once per binary package (a deb file) with the package name and its version as its two parameters.

file

This hook is run once per uploaded file, with the file name as its parameter.

deb

This hook is run once per binary package (a deb file) with the filename as its parameter.

Syntax

Hooks are defined in two Perl hashes, %preupload and %postupload, each indexed by category. In addition to the global hashes, each host entry has two fields with the same names, for the host-specific hooks. Hooks are defined as array references with each item executed in sequence. Note: For backwards compatibility with old configurations they can be defined as a simple scalar, even though they will emit a warning, but this support will be dropped after the next major Debian release. The shell command will be substituted first: %1 will be replace by the first argument, etc.

Per-host or global hooks

Hooks can be global (for all the hosts) or can be for a specific host. Host specific hooks override the global ones for each category.

Examples

This one runs lintian before uploading. It is global and guarantees that you will always upload lintian-clean packages (thanks to lintian return status).

     $preupload{'deb'} = [ 'lintian -v -i %1' ];

This one just display the name and versions of successfully uploaded packages.

     $postupload{'package'} = [ 'echo PACKAGE %1 %2 uploaded' ];

Unlike the two others, this one is specific to one host, debian-ssh, and overrides the default global hook in charge of checking the OpenPGP signatures:

     $cfg{'debian-ssh'}{preupload}{'changes'} = [ 'echo Uploading %1' ];

FILES

/etc/dupload.conf

~/.dupload.conf

--configfile config-file

The configuration files are loaded if available in the order listed, overriding previous files.

ENVIRONMENT

FTP_FIREWALL

FTP_PASSIVE

Those of Net::FTP for the ftp method.

http_proxy or HTTP_PROXY

https_proxy or HTTPS_PROXY

all_proxy or ALL_PROXY

no_proxy

REQUEST_METHOD

Those of HTTP::Tiny for the http and https methods.