foo2zjs - Convert Ghostscript pbmraw or bitcmyk format into a ZJS printer stream
foo2zjs [
options] <
pbmraw-file >
zjs-file
foo2zjs [
options] <
bitcmyk-file >
zjs-file
foo2zjs [
options] <
pksmraw-file >
zjs-file
foo2zjs converts Ghostscript pbmraw, bitcmyk, or pksmraw output formats
to monochrome or color ZJS streams, for driving the Minolta/QMS 2300 DL
network color laser printer and other Zenographics-based printers.
These are the options used to select the parameters of a print job that are
usually controlled on a per job basis.
- -c
- Force color mode if autodetect doesn't work.
-
-d duplex
- Duplex code to send to printer [1].
| 1 |
off |
2 |
long edge |
3 |
short edge |
-
-g xpixxypix
- Set page dimensions in pixels [10200x6600].
-
-m media
- Media code to send to printer [1].
|
| Media |
2300DL |
2200DL |
HP 1018 |
HP P1102 |
HP |
|
HP 1005 |
|
HP 1020 |
HP P1606 |
CP1025 |
|
-z0 |
-z0 |
-z1 |
-z2 |
-z3 |
|
| standard |
1 |
1 |
1 |
1 |
1 |
| transparency |
2 |
2 |
2 |
2 |
2 |
| envelope |
257 |
na |
267 |
267 |
267 |
| letterhead |
259 |
na |
513 |
513 |
513 |
| bond |
na |
na |
260 |
260 |
260 |
| thick |
261 |
4 |
261 |
na |
na |
| postcard |
262 |
na |
na |
na |
na |
| rough |
na |
na |
263 |
263 |
263 |
| heavy |
na |
na |
262 |
262 |
262 |
| labels |
263 |
3 |
263 |
265 |
265 |
| vellum |
na |
na |
273 |
273 |
273 |
| medium |
na |
na |
na |
282 |
282 |
| extraheavy |
na |
na |
na |
283 |
283 |
| color |
na |
na |
512 |
512 |
512 |
| light |
na |
na |
258 |
258 |
258 |
| preprinted |
na |
na |
514 |
514 |
514 |
| prepunched |
na |
na |
515 |
515 |
515 |
| recycled |
na |
na |
516 |
516 |
516 |
-
-p paper
- Paper code to send to printer [1].
|
| Paper |
MC 2300DL |
HP 1018 |
HP P1102 |
HP |
|
HP 1005 |
HP 1020 |
HP P1606 |
CP1025 |
|
-z0 |
-z1 |
-z2 |
-z3 |
|
| letter |
1 |
1 |
1 |
1 |
| legal |
5 |
5 |
5 |
5 |
| executive |
7 |
7 |
7 |
7 |
| A4 |
9 |
9 |
9 |
9 |
| A5 |
11 |
11 |
11 |
11 |
| B5jis |
13 |
13 |
13 |
13 |
| env #10 |
20 |
20 |
20 |
20 |
| env DL |
27 |
27 |
27 |
27 |
| env CL |
28 |
28 |
28 |
28 |
| env B5 |
34 |
34 |
34 |
34 |
| env Monarch |
37 |
37 |
37 |
37 |
| postcard (japan) |
na |
260 |
43 |
43 |
| B5iso |
na |
259 |
na |
na |
| A6 |
na |
262 |
70 |
70 |
| double postcard |
na |
261 |
82 |
82 |
| rotated |
|
|
|
|
| 16k 197x273 |
na |
257 |
257 |
257 |
| fanfold german legal |
na |
258 |
258 |
258 |
| legal |
|
|
|
|
| 16k 184x260 |
na |
na |
263 |
263 |
| 16k 195x270 |
na |
na |
264 |
264 |
| photo 4x6 |
na |
na |
na |
268 |
| photo 5x8 |
na |
na |
na |
269 |
| photo 10x15 |
na |
na |
na |
270 |
-
-n copies
- Number of copies [1].
-
-r xresxyres
- Set device resolution in pixels/inch [1200x600].
-
-s source
- Source (InputSlot) code to send to printer [7].
| 1 |
upper |
4 |
manual |
| 2 |
lower |
7 |
auto |
- -t
- Draft mode. Every other pixel is white.
-
-T density
- Print density (1-5). The default is 3 (medium).
-
-J filename
- Filename string to send to printer.
-
-U username
- Username string to send to printer.
These are the options used to customize the operation of
foo2zjs for a
particular printer.
-
-u xoffxyoff
- Set the offset of the start of the printable region from
the upper left corner, in pixels [0x0].
-
-l xoffxyoff
- Set the offset of the end of the printable region from the
lower right corner, in pixels [0x0].
-
-L mask
- Send logical clipping amounts implied by -u/-l in the
ZjStream [3].
| 0 |
don't send any logical clipping amounts |
| 1 |
only send Y clipping amount |
| 2 |
only send X clipping amount |
| 3 |
send both X and Y clipping amounts |
- -P
- Do not send START_PLANE codes on monochrome output. May be
needed by some black and white only printers, such as the HP LaserJet
1000.
- -A
- AllIsBlack: convert C=1,M=1,Y=1 to just K=1. Works with
bitcmyk input only.
- -B
- BlackClears: K=1 forces C,M,Y to 0. Works with bitcmyk
input only.
-
-X padlen
- Add extra zero padding to the end of BID segments. The
default is 16 bytes. Padding 16 bytes of zeroes is needed for older
ZjStream printers, such as the Minolta 2200DL and HP LaserJet 1000, and
seems harmless to newer ones, such as the Minolta 2300DL. So the default
should be good for all cases.
-
-z model
- Model. Default is 0.
| 0 |
KM 2300DL / HP 1000 / HP 1005 |
| 1 |
HP 1018 / HP 1020 / HP 1022 |
| 2 |
HP Pro P1102 / P1566 / P1606dn |
| 3 |
HP Pro CP1025 |
These options are used for debugging
foo2zjs.
-
-S plane
- Output just a single color plane from a color print and
print it on the black plane. The default is to output all color planes.
| 1 |
Cyan |
| 2 |
Magenta |
| 3 |
Yellow |
| 4 |
Black |
-
-D level
- Set Debug level [0].
Create a black and white ZJS stream:
gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE
-sPAPERSIZE=letter -r1200x600 -sDEVICE=pbmraw
-sOutputFile=- - < testpage.ps
| foo2zjs -r1200x600 -g10200x6600 -p1 >testpage.zm
Create a color ZJS stream:
gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE
-sPAPERSIZE=letter -g10200x6600 -r1200x600 -sDEVICE=bitcmyk
-sOutputFile=- - < testpage.ps
| foo2zjs -r1200x600 -g10200x6600 -p1 >testpage.zc
/usr/bin/foo2zjs
foo2zjs-wrapper(1),
zjsdecode(1)
Rick Richardson <
[email protected]>
http://foo2zjs.rkkda.com/