NAME
Geomview - interactive geometry viewerSYNOPSIS
geomview [-b r g b] [-c commandfile] [-wins #windows] [-noinit] [-nopanels] [-noopengl] [-wpos xmin ymin xsize ysize] [-wpos xsize,ysize[@xmin,ymin]] [-e external-module-name] [-M[cg][sp] pipename] [-start external-module-name [arg ...] --] [-run external-module-path [arg ...] --] [ file ...]
DESCRIPTION
Geomview is an interactive geometry viewer written at the Geometry Center. It displays the objects in the files given on the command line and allows the user to view and manipulate them interactively.TUTORIAL
This manual page serves only as a (very) terse reference manual for geomview. For a gentler introduction to the program and the format of the data files it can read, see "overview" and "oogltour" in the "doc" directory of the geomview distribution, or better, see the full manual: "geomview.tex" or "geomview.ps", also in the "doc" directory. The source distribution also includes a tutorial for how to write external modules in the "src/bin/example" directory.OPTIONS
- -b
- Set the window background color to the given r g b values.
- -c
- Interpret the commands in commandfile, which may be ``-'' for standard input. The command language is described in geomview(5). Commands may be supplied literally, as in ``-c "(ui-panel main off)"''; since they include parentheses, they must be quoted.
- -wins
- Causes geomview to initially display #windows camera windows.
- -wpos
- Specifies the initial location and size of the first camera window. With ``-'', you are prompted for window placement.
- -M objname
-
Display (possibly dynamically changing) geometry (or commands) sent via `` togeomview -g objname [geomview-shell-command]'' or `` geomstuff objname file ...''. The data appears as a geomview object named objname. Actually listens to the named pipe ``/tmp/geomview/ objname''; you can achieve the same effect with the shell commands:
mkdir /tmp/geomview;
mknod /tmp/geomview/ objname p(assuming the directory and named pipe don't already exist), then executing the geomview command:
(geometry objname < /tmp/geomview/objname)
- -M[cg][ps[un|in|in6]] PIPENAME|TCPPORT
- The -M option accepts modifiers: a 'g' suffix expects geometry data (the default), while a ' c' suffix expects GCL commands. A ' p' implies the connection should use a named pipe (the default on everything except on the NeXT), while ' s' implies using a UNIX-domain socket (the default on the NeXT). Since version 1.9 of Geomview internet domain sockets are also supported; use ' sin' to make Geomview listen on the IPv4 port given by TCPPORT, or use 'sin6' to make Geomview listen on an IPv6 port (also as specified by TCPPORT). 'sun' is a synonym for ' s', i.e. use the Unix domain socket with the name PIPENAME. If PIPENAME starts with a slash ('/'), then it is assumed to be an absolute pathname, otherwise the named pipe or socket is created below ${TMPDIR}/geomview/. So -Mcs fred selects reading commands from the UNIX-domain socket named /tmp/geomview/fred, -Mcsin 40000 selects reading commands from the IPv4 port '40000'.
- -noopengl
- Disable the use of OpenGL for (possibly) hardware accelerated rendering, even if the Geomview binary has support for OpenGL compiled in. This also disables the support for transparency and and textures
- -nopanels
- Start up displaying no panels, only graphics windows. Panels may be invoked later as usual with the "Px" keyboard shortcuts or "(ui-panel ...)" command.
- -noinit
- Read no initialization files. By default, geomview reads the system-wide ".geomview" file, followed by those in $HOME/.geomview and ./.geomview.
- -e modulename
- Start an external module; modulename is the name associated with the module, appearing in the main panel's Applications browser, as defined by the emodule-define command (see geomview(5) for details).
- -start modulename arguments ... --
- Like -e but allows you to pass arguments to the external module. "--" signals the end of the argument list; the "--" may be omitted if it would be the last argument on the geomview command line.
- -run shell-command arguments ...
- Like -start but takes the pathname of executable of the external module instead of the module's name.
GEOMETRY FILE FORMATS
The format of the files read by geomview is described in oogl(5); type "man 5 oogl", or see the file man/cat5/oogl.5 in the geomview distribution, for details.STARTUP FILES
Immediately upon starting up geomview reads and executes the commands in the system-wide .geomview file in the "data" subdirectory of the geomview directory. Then, if there is a file named .geomview in the current directory, it executes the commands in that file. If no in the user's home directory, and executes it if found. The startup file of an individual user overrides the systemwide defaults, since later commands take precedence over earlier ones.EXTERNAL MODULES
Geomview has the ability to interact via its command language with other programs, called "external modules". Many such modules have been written and appear in the "Application" browser in the main geomview panel. To invoke a module you click the mouse on the module's entry in this browser. This starts the module and adds an additional entry to the browser, beginning with a number in square brackets as in ``[1] Crayola'', which represents the running instance of that module. You can terminate the module by clicking on the numbered entry. Modules are documented separately from geomview. See the manual page for each module for details.INSTALLING AN EXTERNAL MODULE
Geomview looks for external modules in a special directory for modules. In the geomview distribution tree this is the "bin/$MACHTYPE" subdirectory. A module consists of two files: the executable program, and a "module init file", which is a whose name is ".geomview-" followed by the module name. The module init file tells geomview how to run that program. Be sure to always keep these two files together; geomview needs both of them in order to run the module. To install a new module, simply put the module's executable file and its init file in your geomview's module directory. The next time you run geomview, it will know about that module.EXTERNAL MODULE INIT FILES
An external module init file is the file that tells geomview how to run that module. Its name must be ".geomview-" followed by the name of the module, e.g. ".geomview-foo". It should contain geomview commands; typically it will contain a single emodule-define command which enters the module into geomview's application browser:
(emodule-define "Foo" "foo")
The first string is the name that appears in the browser. The second string is
the command to invoke the module. It may contain arguments; in fact it can be
an arbitrary shell command.
KEYBOARD SHORTCUTS
Many geomview operations are available from the keyboard. Hitting the "?" button on the main panel, or typing "?" with the cursor in any window, causes geomview to print a message on standard output listing all the keyboard shortcuts.Keyboard commands apply while cursor is in any graphics window and most control panels. Most commands allow one of the following selection prefixes (if none is provided the command applies to the current object): g world geom g# #'th geom g* All geoms c current camera c# #'th camera c* All cameras Many allow a numeric prefix: if none they toggle or reset current value. Appearance: Draw: Shading: Other: af Faces 0as Constant av eVert normals: always face viewer ae Edges 1as Flat #aw Line Width (pixels) an Normals 2as Smooth #ac edges Closer than faces(try 5-100) ab Bounding Boxes 3as Smooth, non-lighted al Shade lines aV Vectors aT allow transparency at Texture-mapping Color: aC allow concave polygons Cf Ce Cn Cb CB face/edge/normal/bbox/backgnd Motions: Viewing: r rotate [ Leftmouse=X-Y plane, 0vp Orthographic view t translate Middle=Z axis, 1vp Perspective view z zoom FOV Shift=slow motion, vd Draw other views' cameras f fly in r/t modes. ] #vv field of View o orbit [Left=steer, Middle=speed ] #vn near clip distance s scale #vf far clip distance w/W recenter/all v+ add new camera h/H halt/halt all vx cursor on/off @ select center of motion (e.g. g3@) vb backfacing poly cull on/off #vl focal length L Look At object v~ Software shading on/off show Panel: Pm Pa Pl Po main/appearance/lighting/obscure Pt Pc PC Pf tools/cameras/Commands/file-browser Ps P- saving/read commands from tty Lights: ls le Show lights / Edit Lights Metric: me mh ms Euclidean Hyperbolic Spherical Model: mv mp mc Virtual Projective Conformal Other: N normalization < Pf load geom/command file 0N none > Ps save something to file ui motion has inertia 1N each TV NTSC mode toggle uc constrained (X/Y) motion 2N all uo motion in Own coord system Rightmouse-doubleclick pick as current target object Shift-Rightmouse pick interest (center) point Renderman: RR send RIB output to <fileprefix>NNN.rib (default fileprefix == "geom") RC Emulate lines using cylinders (default) RP Emulate lines using polygons Ra choose ASCII RIB format (default) Rb choose BINARY RIB format Rt choose Display token to specify .tiff file (default) Rf choose Display token to specify framebuffer Rs Simulate background color with Polygon (default) Rx No background simulation - fully transparent (alpha) background
NOTES
The "geomview" command is actually a shell script that sets various environment variables which tell geomview about your local setup, and then invokes the geomview executable program "gvx" (or "gvx.OGL"). Do not run "gvx" by itself; always invoke geomview with the "geomview" shell script.SEE ALSO
oogl(5) - OOGL geometric file formats and conventionsFILES
data/.geomview - default initialization file in geomview command language
ENVIRONMENT
The ``geomview'' shell script sets these internally by default; if you set them before invoking geomview, the values you set will be used instead of the built-in defaults.GEOMVIEW_GVX - geomview executable
AUTHORS
Stuart Levy Tamara Munzner Mark Phillips
Celeste Fowler Nathaniel Thurston
Daniel Krech Scott Wisdom
Daeron Meyer Timothy Rowley
The National Science and Technology Research Center for
Computation and Visualization of Geometric Structures
(The Geometry Center)
University of Minnesota
www.geomview.org
BUGS
Sometimes core dumps on bad input files.| December 10, 1996 | Geometry Center |