if_otus

NAME

otus — Atheros AR9170 USB IEEE 802.11a/b/g/n wireless network device

SYNOPSIS

To compile this driver into the kernel, place the following lines in your kernel configuration file: Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

DESCRIPTION

The otus driver supports USB 2.0 wireless network devices based on the Atheros AR9170 chipset. The Atheros AR9170 is a draft-802.11n adapter that uses an external radio to operate in either 2.4GHz only or 2.4GHz and 5GHz. The AR9101 radio supports 1T1R operation in 2GHz only. The AR9102 radio supports 2T2R operation in 2GHz only. The AR9104 radio supports 2T2R operation both 2GHz and 5GHz. These are the modes the otus driver can operate in:

BSS mode

Also known as infrastructure mode, this is used when associating with an access point, through which all traffic passes. This mode is the default.

The otus driver can be configured to use Wired Equivalent Privacy (WEP) or Wi-Fi Protected Access (WPA-PSK and WPA2-PSK). WPA is the de facto encryption standard for wireless networks. It is strongly recommended that WEP not be used as the sole mechanism to secure wireless communication, due to serious weaknesses in it. The otus driver can be configured at runtime with ifconfig(8).

FILES

The driver needs at least version 1.0 of the following firmware files, which is loaded when an interface is attached:

HARDWARE

The otus driver provices support for Atheros AR9170 USB IEEE 802.11b/g/n wireless network adapters, including:

EXAMPLES

Join an existing BSS network (i.e., connect to an access point): Join a specific BSS network with network name “my_net”: Join a specific BSS network with 64-bit WEP encryption:

DIAGNOSTICS

%s: failed load firmware of file otusfw-main

For some reason, the driver was unable to read the microcode file from the filesystem. The file might be missing or corrupted.

SEE ALSO

intro(1), netintro(4), otusfw(4), usb(4), wlan(4), arp(8), hostapd(8), ifconfig(8), wpa_supplicant(8)

HISTORY

The otus driver first appeared in OpenBSD 4.6.

AUTHORS

The otus driver was written by Damien Bergamini <[email protected]> and ported by Adrian Chadd <[email protected]>.

CAVEATS

The otus driver only supports 802.11a/b/g operations. 802.11n operation is not supported at this time.