inputattach - attach a serial line to an input-layer device
inputattach [
--daemon] [
--always] [
--noinit]
[
--baud baud>] <
mode> <
device>
inputattach attaches a serial line to an input-layer device via a line
discipline.
At least one of the available modes must be specified on the command line; if
the modes can be probed, up to four can be specified, and they will be tried
in sequence until one matches the device.
- --daemon
- Forks into the background.
- --always
- Ignore initialization failures when attaching the
device.
- --noinit
- Skip device initialization.
- --baud
- Specify the baud rate to use. (This is only necessary if
the default rate is incorrect.)
-
-bare, --microsoft
- 2-button Microsoft mouse.
-
-dump, --dump
- Just enable device.
-
-eeti, --eetiegalax
- EETI eGalaxTouch.
-
-elo, --elotouch
- ELO touchscreen, 10-byte mode.
-
-elo3b, --elo261-280
- ELO Touchscreen, 3-byte mode.
-
-elo4b, --elo271-140
- ELO touchscreen, 4-byte mode.
-
-elo6b, --elo4002
- ELO touchscreen, 6-byte mode.
-
-ep, --easypen
- Genius EasyPen 3x4 tablet.
-
-fjt, --fujitsu
- Fujitsu serial touchscreen.
-
-fsia6b, --fsia6b
- FS-iA6B RC Receiver.
-
-ham, --hampshire
- Hampshire touchscreen.
-
-ifor, --iforce
- I-Force joystick or wheel.
-
-ipaq, --h3600ts
- Ipaq h3600 touchscreen.
-
-ipaqkbd, --stowawaykbd
- Stowaway keyboard.
-
-lk, --lkkbd
- DEC LK201 / LK401 keyboards.
-
-mag, --magellan
- Magellan / SpaceMouse.
-
-mman, --mouseman
- 3-button Logitech / Genius mouse.
-
-mman4, --mouseman4
- 4-button Logitech / Genius mouse.
-
-mmw, --mmwheel
- Logitech mouse with 4-5 buttons or a wheel.
-
-ms, --mshack
- 3-button mouse in Microsoft mode.
-
-ms3, --intellimouse
- Microsoft IntelliMouse.
-
-msc, --mousesystems
- 3-button Mouse Systems mouse.
-
-mtouch, --mtouch
- MicroTouch (3M) touchscreen.
-
-newt, --newtonkbd
- Newton keyboard.
-
-orb, --spaceorb
- SpaceOrb 360 / SpaceBall Avenger.
-
-pm3k, --penmount3000
- PenMount 3000 touchscreen.
-
-pm6k, --penmount6000
- PenMount 6000 touchscreen.
-
-pm9k, --penmount9000
- PenMount 9000 touchscreen.
-
-pmm1, --penmount6250
- PenMount 6250 touchscreen.
-
-ps2m, --ps2mult
- PS/2 serial multiplexer.
-
-ps2ser, --ps2serkbd
- PS/2 via serial keyboard.
-
-pulse8-cec, --pulse8-cec
- Pulse Eight HDMI CEC dongle.
-
-rainshadow-cec, --rainshadow-cec
- RainShadow Tech HDMI CEC dongle.
-
-sbl, --spaceball
- SpaceBall 2003 / 3003 / 4000 FLX.
-
-skb, --sunkbd
- Sun Type 4 and Type 5 keyboards.
-
-sting, --stinger
- Gravis Stinger.
-
-sun, --sunmouse
- 3-button Sun mouse.
-
-t213, --touchit213
- Sahara Touch-iT213 Tablet PC.
-
-taos, --taos-evm
- TAOS evaluation module.
-
-tr, --touchright
- Touchright serial touchscreen.
-
-tsc, --tsc
- TSC-10/25/40 serial touchscreen.
-
-tw, --touchwin
- Touchwindow serial touchscreen.
-
-twid, --twiddler
- Handykey Twiddler chording keyboard.
-
-twidjoy, --twiddler-joy
- Handykey Twiddler used as a joystick.
-
-vs, --vsxxx-aa
- DEC VSXXX-AA / VSXXX-GA mouse and VSXXX-A tablet.
-
-w8001, --w8001
- Wacom W8001 pen and/or touch devices. The default baud
rate, 38400bps, allows for touch-only or pen and touch devices; for
pen-only devices, " --baud 19200" must be specified.
-
-wacom_iv, --wacom_iv
- Wacom protocol IV tablet.
-
-war, --warrior
- WingMan Warrior.
-
-zhen, --zhen-hua
- Zhen Hua 5-byte protocol.
inputattach was written by Vojtech Pavlik and Arndt Schoenewald, and
improved by many others; see the linuxconsole tools documentation for details.
This manual page was written by Stephen Kitt <
[email protected]>, for the
Debian GNU/Linux system (but may be used by others).