joy

NAME

joy — joystick device driver

SYNOPSIS

To compile this driver into the kernel, place the following lines in your kernel configuration file:

device joy

Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

joy_load="YES"

In /boot/device.hints:
hint.joy.0.at="isa"
hint.joy.0.port="0x201"
hint.joy.1.at="isa"
hint.joy.1.port="0x201"

#include <sys/joystick.h>

DESCRIPTION

The joystick device driver allows applications to read the status of the PC joystick.

This device may be opened by only one process at a time.

The joystick status is read from a structure via a read() call. The structure is defined in the header file as follows:

	struct joystick { 
		int x;         /* x position */ 
		int y;         /* y position */ 
		int b1;	       /* button 1 status */ 
		int b2;	       /* button 2 status */ 
	};

Positions are typically in the range 0-2000.

One line perl example:

perl -e 'open(JOY,"/dev/joy0")||die;while(1) 
{sysread(JOY,$x,16);@j=unpack("iiii",$x);print "@j\n";sleep(1);}'

ioctl calls

Several ioctl() calls are also available. They take an argument of type int *

JOY_SETTIMEOUT int *limit: Set the time limit (in microseconds) for reading the joystick status. Setting a value too small may prevent to get correct values for the positions (which are then set to -2147483648), however this can be useful if one is only interested by the buttons status.
JOY_GETTIMEOUT int *limit: Get the time limit (in microseconds) used for reading the joystick status.
JOY_SET_X_OFFSET int *offset: Set the value to be added to the X position when reading the joystick status.
JOY_SET_Y_OFFSET int *offset: Set the value to be added to the Y position when reading the joystick status.
JOY_GET_X_OFFSET int *offset: Get the value which is added to the X position when reading the joystick status.
JOY_GET_Y_OFFSET int *offset: Get the value which is added to the Y position when reading the joystick status.

TECHNICAL SPECIFICATIONS

The pinout of the DB-15 connector is as follow:

  1  XY1 (+5v) 
  2  Switch 1 
  3  X1 (potentiometer #1) 
  4  Switch 1 (GND) 
  5  Switch 2 (GND) 
  6  Y1 (potentiometer #2) 
  7  Switch 2 
  8  N.C. 
  9  XY2 (+5v) 
 10  Switch 4 
 11  X2 (potentiometer #3) 
 12  Switch 3&4 (GND) 
 13  Y2 (potentiometer #4) 
 14  Switch 3 
 15  N.C.

Pots are normally 0-150k variable resistors (0-100k sometimes), and according to the IBM technical reference, the time is given by Time = 24.2e-6s + 0.011e-6s * R/Ohms

FILES

/dev/joy?: joystick device files

HISTORY

The joy driver appeared in FreeBSD 2.0.5.

AUTHORS

Jean-Marc Zucconi <[email protected]>

January 23, 1995

Debian