mk48txx

NAME

SYNOPSIS

DESCRIPTION

typedef uint8_t (*mk48txx_nvrd_t)(device_t dev, int off); 
typedef void (*mk48txx_nvwr_t)(device_t dev, int off, uint8_t v);

struct mk48txx_softc { 
	struct resource	sc_res; 
	struct mtx	sc_mtx; 
	eventhandler_tag	sc_wet; 
	const char	*sc_model; 
	bus_size_t	sc_nvramsz; 
	bus_size_t	sc_clkoffset; 
	u_int		sc_year0; 
	u_int		sc_flag; 
	mk48txx_nvrd_t	sc_nvrd; 
	mk48txx_nvwr_t	sc_nvwr; 
};

sc_res

The bus resource used for accessing the chip's non-volatile memory (including the clock registers), which must be supplied by the front-end when using the default access methods (see below). Otherwise this member is optional.

sc_mtx

The hardware mutex used when accessing the chip's non-volatile memory (including the clock registers), which must be initialized with MTX_DEF by the front-end.

sc_wet

The event handler tag for the watchdog functionality, which is registered by the mk48txx_attach() function if supported by the chip and specified as part of the machine-dependent features (see below).

sc_model

The chip model which this instance should serve. This member must be set to one of “mk48t02”, “mk48t08”, “mk48t18”, or “mk48t59” by the front-end.

sc_nvramsz

The size of the non-volatile RAM in the Mostek chip, which is set by the mk48txx_attach() function.

sc_clkoffset

The offset into the control registers of the Mostek chip, which is set by the mk48txx_attach() function.

sc_year0

The year offset to be used with the ‘year’ counter of the clock, which must be set by the front-end. This value is generally dependent on the system configuration in which the clock device is mounted. For instance, on Sun Microsystems machines the convention is to have clock's two-digit year represent the year since 1968.

sc_flag

This flag is used to specify machine-dependent features. The following flags are supported:

MK48TXX_NO_CENT_ADJUST

If the resulting date retrieved with the “clock_gettime() method” would be earlier than January 1, 1970, the driver will assume that the chip's year counter actually represents a year in the 21st century. This behavior can be overridden by setting this flag, which causes the mk48txx driver to respect the clock's century bit instead.

MK48TXX_WDOG_REGISTER

When this flag is set, the mk48txx driver will register as a watchdog via the interface defined in watchdog(9) if supported by the specific chip model.

MK48TXX_WDOG_ENABLE_WDS

When this flag is set, the mk48txx driver will set the watchdog steering (WDS) bit when enabling the watchdog functionality of the chip. enabled (see the chip documentation for further information regarding the WDS bit).

sc_nvread

 

sc_nvwrite

These members specify the access methods for reading respectively writing clock device registers. The default, when NULL is passed as an access method, is to access the chip memory (and clock registers) as if they were direct-mapped using the specified bus resource.

Otherwise, the driver will call the respective function supplied by the front-end to perform the access, passing it the offset off of the chip memory (or clock register) location to be read from or written to, respectively.

HARDWARE

SEE ALSO

HISTORY

AUTHORS