NAME
net80211 — standard interface to IEEE 802.11 devicesSYNOPSIS
#include <sys/types.h>#include <sys/socket.h>
#include <net/if.h>
#include <net/ethernet.h>
#include <net80211/ieee80211_ioctl.h>
DESCRIPTION
This section describes the standard programming interface to configure and retrieve status information for IEEE 802.11 devices that depend on the wlan(4) module for operation. The interface is via one of the following ioctl(2) calls on a socket:SIOCG80211- Get configuration or status information.
SIOCS80211- Set configuration information.
struct ieee80211req {
char i_name[IFNAMSIZ]; /* if_name, e.g. "wi0" */
uint16_t i_type; /* req type */
int16_t i_val; /* Index or simple value */
int16_t i_len; /* Index or simple value */
void *i_data; /* Extra data */
};
EOPNOTSUPP.
SIOCG80211 requests that return data to an
application place small values in i_val or in
a user-specified buffer pointed to by i_data.
When an indirect buffer is used i_len
specifies how large the indirect buffer is and on return it is set by the
system to the actual amount of data returned.
SIOCS80211 requests use a similar scheme
with data passed to the system taken either from
i_val or an indirect buffer pointed to by
i_data.
For SIOCG80211 the following values of
i_type are valid:
IEEE80211_IOC_AMPDU- Return whether or not AMPDU is enabled in i_val. AMPDU is an aggregation scheme that is part of the 802.11n specification and is used only when operating on an HT channel. The value returned is one of: 0 (AMPDU disabled), 1 (AMPDU enabled for transmit), 2 (AMPDU enabled for receive), and 3 (AMPDU enabled for transmit and receive). The 802.11n specification says a compliant station must receive AMPDU but may not support transmitting AMPDU frames. Disabling AMPDU receive is mainly useful for testing and working around bugs.
IEEE80211_IOC_AMPDU_DENSITY- Return the minimum density for bursting AMPDU frames in i_val. The value returned is one of: 0 (no time restriction), 1 (1/4 usec), 2 (1/2 usec), 3 (1 usec), 4 (2 usec), 5 (4 usec), 6 (8 usec), and 7 (16 usec).
IEEE80211_IOC_AMPDU_LIMIT- Return the limit on the size of AMPDU frames in i_val. The value returned is one of: 0 (8 kilobytes), 1 (16 kilobytes), 2 (32 kilobytes), and 3 (64 kilobytes).
IEEE80211_IOC_AMSDU- Return whether or not AMSDU is enabled in i_val. AMSDU is an aggregation scheme that is part of the 802.11n specification and is used only when operating on an HT channel. The value returned is one of: 0 (AMSDU disabled), 1 (AMSDU enabled for transmit), 2 (AMSDU enabled for receive), and 3 (AMSDU enabled for transmit and receive). The 802.11n specification says a compliant station must receive AMSDU but may not support transmitting AMSDU frames. Disabling AMSDU receive is mainly useful for testing and working around bugs.
IEEE80211_IOC_AMSDU_LIMIT- Return the limit on the size of AMSDU frames in i_val. The value returned is one of: 3839 (bytes) and 7935 (bytes). Note these values are specified by 802.11n; arbitrary values are not allowed.
IEEE80211_IOC_APBRIDGE- Return whether AP bridging is enabled in i_val. Normally packets sent between stations associated to the same access point are delivered without going through system layers that do packet filtering; when AP bridging is disabled packets are passed up the system to be forwarded using some other mechanism. This value will be non-zero when AP bridging is enabled and otherwise zero.
IEEE80211_IOC_APPIE- Return an application information element via
i_data. Application IE's are maintained
for many 802.11 frames; the request must identify the frame to return an
IE for in i_val. For example, to retrieve
the IE sent in each Beacon frame i_val
would be set to
IEEE80211_FC0_SUBTYPE_BEACON |
IEEE80211_FC0_TYPE_MGT. If no information
element is installed then
EINVALis returned. If the data buffer for returning data is too small to hold the information element the value is truncated; this permits querying the presence of data by requesting zero bytes of data be returned. IEEE80211_IOC_AUTHMODE- Return the current authentication mode in
i_val. Valid values are
IEEE80211_AUTH_NONE(no authentication),IEEE80211_AUTH_OPEN(open authentication),IEEE80211_AUTH_SHARED(shared key authentication),IEEE80211_AUTH_8021X(802.1x only authentication), andIEEE80211_AUTH_WPA(WPA/802.11i/802.1x authentication). IEEE80211_IOC_BEACON_INTERVAL- Return the time between Beacon frames (in TU) in i_val.
IEEE80211_IOC_BGSCAN- Return whether background scanning is enabled in
i_val. When this value is non-zero and
operating in station mode the station will periodically leave the current
channel and scan for neighboring stations. See also
IEEE80211_IOC_BGSCAN_IDLEandIEEE80211_IOC_BGSCAN_INTERVAL. IEEE80211_IOC_BGSCAN_IDLE- Return in i_val the
minimum time (msecs) a station must be idle (i.e. not transmitting or
receiving frames) before it will do a background scan. See also
IEEE80211_IOC_BGSCAN_INTERVAL. IEEE80211_IOC_BGSCAN_INTERVAL- Return in i_val the
minimum time (seconds) between background scan operations. See also
IEEE80211_IOC_BGSCAN_IDLE. IEEE80211_IOC_BMISSTHRESHOLD- Return in i_val the number of consecutive missed Beacon frames before the system will attempt to roam to a different/better access point.
IEEE80211_IOC_BSSID- Return the MAC address for the current BSS identifier via i_data. When the interface is running, the bssid is either the value configured locally (e.g. for an IBSS network started by the local station) or the value adopted when joining an existing network. For WDS interfaces this value is the address of the remote station. When the interface is not running, the bssid returned is the desired bssid, if any, that has been configured.
IEEE80211_IOC_BURST- Return whether or not packet bursting is enabled in i_val. If this value is non-zero then the system will try to send packets closely spaced to improve throughput.
IEEE80211_IOC_CHANINFO- Return the set of available channels via i_data. Note this data should be used by user applications to map between channel specifications (frequency and attributes) and IEEE channel numbers as user applications may not have the necessary information to do this directly (e.g. for 900MHz radios, operation in the Public Safety Band).
IEEE80211_IOC_CHANLIST- Return the current list of usable channels via i_data. The channel list is returned as a bit vector with bit N set to 1 if IEEE channel number N is available for use.
IEEE80211_IOC_CHANNEL- Return the IEEE channel number of the current channel in
i_val. Note this request is deprecated;
use
IEEE80211_IOC_CURCHANinstead. IEEE80211_IOC_COUNTERMEASURES- Return whether TKIP Countermeasures are enabled in i_val. This value will be non-zero when Countermeasures are enabled and otherwise zero.
IEEE80211_IOC_CURCHAN- Return information for the current channel via i_data. This information includes the IEEE channel number, the frequency, and attributes that describe the operating constraints (e.g. Passive Scan, DFS, usage restrictions).
IEEE80211_IOC_DEVCAPS- Return device capabilities in the data buffer pointed at by i_data. The buffer must be large enough to return the number of available channels but otherwise may be made small to limit how much information is returned.
IEEE80211_IOC_DFS- Return whether or not Dynamic Frequency Selection (DFS) is enabled in i_val. DFS embodies several facilities including detection of overlapping radar signals, dynamic transmit power control, and channel selection according to a least-congested criteria. DFS support is mandatory for some 5GHz frequencies in certain locales (e.g. ETSI). By default DFS is enabled according to the regulatory definitions and the current country code, regdomain, and channel.
IEEE80211_IOC_DOTD- Return whether or not 802.11d support is enabled in i_val. When 802.11d is enabled in station mode, Beacon frames that advertise a country code different than the currently configured country code will cause an event to be dispatched to user applications. This event can be used by the station to adopt that country code and operate according to the associated regulatory constraints. When operating as an access point with 802.11d enabled the Beacon and ProbeResponse frames transmitted will advertise the current regulatory domain settings.
IEEE80211_IOC_DOTH- Return whether 802.11h support is enabled in i_val. When 802.11h is enabled Beacon and ProbeResponse frames will have the SpectrumMgt bit set in the capabilities field and country and power constraint information elements will be present. 802.11h support also includes handling Channel Switch Announcements (CSA) which are a mechanism to coordinate channel changes by an access point. By default 802.11h is enabled if the device is capable.
IEEE80211_IOC_DROPUNENCRYPTED- Return, in i_val, whether unencrypted packets transmit/received should be discarded. This value will be zero if unencrypted packets will be accepted and non-zero if they are to be discarded.
IEEE80211_IOC_DTIM_PERIOD- Return the period (in beacon intervals) between DTIM events in i_val.
IEEE80211_IOC_DWDS- Return, in i_val, whether or not Dynamic WDS support is enabled. Dynamic WDS is a facility by which packets may be tunneled over normal Infrastructure BSS associations using 4-address (WDS) frames.
IEEE80211_IOC_FF- Return, in i_val, whether Atheros fast-frames support is enabled. Fast-frames is a non-standard protocol extension that aggregates multiple frames to improve throughput. Note that enabling fast-frames support does not guarantee use; the client and access point must negotiate its use.
IEEE80211_IOC_FRAGTHRESHOLD- Return, in i_val, the threshold (in bytes) for enabling fragmentation frames. Packets larger than this value will automatically be split into multiple fragmented frames that are sent one after the other.
IEEE80211_IOC_GREENFIELD- Return, in i_val, whether or not Greenfield preamble use is enabled. This setting is meaningful only when operating with 802.11n on an HT channel.
IEEE80211_IOC_HIDESSID- Return, in i_val, whether SSID hiding/cloaking is enabled. SSID hiding is only meaningful when operating as an access point. When this is enabled Beacon frames do not include the SSID and ProbeRequest frames are not answered unless they include the AP's SSID. This value will be non-zero when SSID hiding is enabled and otherwise zero.
IEEE80211_IOC_HTCOMPAT- Return, in i_val, whether or not 802.11n compatibility support is enabled. The 802.11n protocol specification went through several incompatible iterations. Some vendors implemented 11n support to older specifications that will not interoperate with a purely 11n-compliant station. In particular the information elements included in management frames for old devices are different. When compatibility support is enabled both standard and compatible data will be provided and/or accepted.
IEEE80211_IOC_HTCONF- Return the setting for automatic promotion of HT channels in i_val. Promotion happens when the system must select a channel and may choose between legacy, HT20, and HT40 operation (e.g. when scanning). Valid values are: 0 (do not promote, use legacy), 1 (promote to HT20), and 2 (promote to HT40).
IEEE80211_IOC_HTPROTMODE- Return, in i_val, the
technique used to protect HT frames in a mixed 802.11n network. Valid
values are:
IEEE80211_PROTMODE_OFF(no protection enabled) andIEEE80211_PROTMODE_RTSCTS(send RTS and wait for CTS). IEEE80211_IOC_HWMP_MAXHOPS- Return the maximum acceptable hop count in an HWMP path in i_val.
IEEE80211_IOC_HWMP_ROOTMODE- Return the setting for Mesh root mode operation in
i_val. Valid values are:
IEEE80211_HWMP_ROOTMODE_DISABLED(root mode is disabled),IEEE80211_HWMP_ROOTMODE_NORMAL(send broadcast Path Request frames),IEEE80211_HWMP_ROOTMODE_PROACTIVE(send broadcast Path Request frames and force replies) andIEEE80211_HWMP_ROOTMODE_RANN(send broadcast Root Announcement (RANN) frames). IEEE80211_IOC_IC_NAME- Return the underlying hardware
device(9) name in the buffer pointed to by
i_data and the name length including
terminating NUL character in i_len. If
the buffer length is too small to hold the full name
EINVALwill be returned. IEEE80211_IOC_INACTIVITY- Return whether or not the system handles inactivity processing in i_val. When inactivity processing is enabled the system will track stations that have not transmitted frames and periodically probe them to check if they are still present. Stations that are inactive and do not respond to probes are dropped.
IEEE80211_IOC_MACCMD- Return information about the state of the MAC address
access control list (ACL) system. There are two requests supported:
IEEE80211_MACCMD_POLICY(to retrieve the current policy in i_val ), andIEEE80211_MACCMD_LISTto retrieve the list installed/active ACL's via i_data. The wlan_acl(4) module must be installed and enabled orEINVALwill be returned. IEEE80211_IOC_MESH_AP- Return whether or not Mesh AP support is enabled in i_val.
IEEE80211_IOC_MESH_ID- Return the Mesh ID in the buffer pointed to by i_data.
IEEE80211_IOC_MESH_FWRD- Return whether or not packet forwarding support is enabled in i_val.
IEEE80211_IOC_MESH_PP_METRIC- Return the link metric protocol in the buffer pointed to by i_data.
IEEE80211_IOC_MESH_PP_PATH- Return the path selection protocol in the buffer pointed to by i_data.
IEEE80211_IOC_MESH_RTCMD- Return information about the state of the Mesh routing
tables. One request is supported:
IEEE80211_MESH_RTCMD_LISTto retrieve the contents of the routing table in the buffer pointed to by i_data. IEEE80211_IOC_MESH_TTL- Return, in i_val, the Mesh Time To Live (TTL) setting installed in packets transmitted by this mesh node.
IEEE80211_IOC_NUMSSIDS- Return the number of SSIDs supported in i_val.
IEEE80211_IOC_NUMWEPKEYS- Return the number of WEP keys supported in i_val.
IEEE80211_IOC_POWERSAVE- Return the current powersaving mode in
i_val. Valid values are
IEEE80211_POWERSAVE_OFF(power save operation is disabled) andIEEE80211_POWERSAVE_ON(power save operation is enabled). IEEE80211_IOC_POWERSAVESLEEP- Return the powersave sleep time in TU in i_val. This value is also termed the listen interval and represents the maximum time a station will sleep before waking to retrieve packets buffered by an access point.
IEEE80211_IOC_PRIVACY- Return the current MLME setting for PRIVACY in i_val. When PRIVACY is enabled all data packets must be encrypted. This value will be zero if PRIVACY is disabled and non-zero when PRIVACY is enabled.
IEEE80211_IOC_PROTMODE- Return the current 802.11g protection mode in
i_val. Protection is the mechanism used
to safeguard 802.11b stations operating on an 802.11g network. Valid
values are
IEEE80211_PROTMODE_OFF(no protection enabled),IEEE80211_PROTMODE_CTS(send CTS to yourself), andIEEE80211_PROTMODE_RTSCTS(send RTS and wait for CTS). IEEE80211_IOC_PUREG- Return whether ``pure 11g'' mode is enabled in i_val. This setting is meaningful only for access point operation; when non-zero, 802.11b stations will not be allowed to associate.
IEEE80211_IOC_PUREN- Return whether ``pure 11n'' mode is enabled in i_val. This setting is meaningful only for access point operation; when non-zero, legacy (non-11n capable) stations will not be allowed to associate.
IEEE80211_IOC_REGDOMAIN- Return the regulatory state in the buffer pointed to by i_data.
IEEE80211_IOC_RIFS- Return whether or not Reduced InterFrame Spacing (RIFS) is enabled in i_val. This setting is meaningful only when operating with 802.11n on an HT channel.
IEEE80211_IOC_ROAM- Return station roaming parameters in the buffer pointed to by i_data.
IEEE80211_IOC_ROAMING- Return the current roaming mode in
i_val. Roaming mode specifies which
entity controls operation of the MLME state machine when operating as a
station in an Infrastructure BSS. Valid values are:
IEEE80211_ROAMING_DEVICE(driver/firmware is in control),IEEE80211_ROAMING_AUTO(host 802.11 layer is in control), andIEEE80211_ROAMING_MANUAL(application is in control). IEEE80211_IOC_RTSTHRESHOLD- Return the threshold (in bytes) for enabling transmission of RTS frames in i_val. Packets larger than this value will automatically have an RTS frame sent preceding it to reduce the likelihood of packet loss.
IEEE80211_IOC_SCAN_RESULTS- Return the current contents of the scan cache in the data area pointed to by i_data.
IEEE80211_IOC_SCANVALID- Return in i_val how long (in seconds) results from a scan operation will be considered valid. When scan results are no longer valid and they are needed (e.g. to roam) the system will initiate a scan operation to replenish the scan cache.
IEEE80211_IOC_SHORTGI- Return whether or not Short Guard Interval (SGI) is enabled in i_val. Note SGI is only used when operating with 802.11n on an HT channel.
IEEE80211_IOC_SMPS- Return the Spatial Multiplexing Power Save (SMPS) setting
in i_val. This setting is meaningful only
when operating with 802.11n on an HT channel. Valid values are:
IEEE80211_HTCAP_SMPS_DYNAMIC(Dynamic SMPS is enabled),IEEE80211_HTCAP_SMPS_ENA(Static SMPS is enabled), andIEEE80211_HTCAP_SMPS_OFF(SMPS is disabled). IEEE80211_IOC_SSID- Return the requested SSID in the buffer pointed to by i_data. If i_val is ≥ 0 then the request refers to the configured value for that slot. Generally, 0 is the only valid value, but some interfaces support more SSIDs.
IEEE80211_IOC_STA_INFO- Return information about the current state of the specified
station(s) via i_data. The MAC address of
a single station may be passed in or, if the broadcast address is
supplied, information about all stations will be returned. If a single
station is requested and the MAC address is unknown then
ENOENTwill be returned. IEEE80211_IOC_STA_STATS- Return collected statistics for the specified station via
i_data. The MAC address of the desired
station is passed in; if it is unknown
ENOENTwill be returned. IEEE80211_IOC_STA_VLAN- Return any VLAN tag assigned to a station via i_data.
IEEE80211_IOC_TDMA_SLOT- Return the slot number for the station in i_val. Slot number zero is the master station in a TDMA network.
IEEE80211_IOC_TDMA_SLOTCNT- Return the count of slots in the TDMA network in i_val.
IEEE80211_IOC_TDMA_SLOTLEN- Return the length (in usecs) of the TDMA slot assigned to each station in the network in i_val.
IEEE80211_IOC_TDMA_BINTERVAL- Return the number of superframes between Beacon frames in i_val. A TDMA network with N slots and slot length T has a superframe of NxT.
IEEE80211_IOC_TSN- Return whether or not Transitional Security Network (TSN) is enabled in i_val.
IEEE80211_IOC_TURBOP- Return whether Atheros Dynamic Turbo mode is enabled in i_val. Dynamic Turbo mode is a non-standard protocol extension available only on Atheros devices where channel width is dynamically changed between 20MHz and 40MHz. Note that enabling Dynamic Turbo mode support does not guarantee use; both client and access point must use Atheros devices and support must be enabled on both sides.
IEEE80211_IOC_TXPARAMS- Return transmit parameters in the buffer pointed to by i_data.
IEEE80211_IOC_TXPOWER- Return the transmit power limit in .5 dBm units in i_val. This value represents the effective maximum and is calculated according to the maximum power allowed by local regulations, any user-specified power limit, and the maximum power the device is capable of.
IEEE80211_IOC_TXPOWMAX- Return the user-specified maximum transmit power in .5 dBm units in i_val. The maximum setting is applied after any regulatory cap.
IEEE80211_IOC_WEP- Return the current WEP status in
i_val. Valid values are:
IEEE80211_WEP_ON(enabled for all packets sent and received),IEEE80211_WEP_OFF(disabled), andIEEE80211_WEP_MIXED(enabled for transmit and receive but also willing to receive unencrypted frames). This request is deprecated; useIEEE80211_IOC_PRIVACYandIEEE80211_IOC_UNENCRYPTEDinstead. IEEE80211_IOC_WEPKEY- Return the requested WEP key via
i_data. The key number is specified in
i_val and may be 0-3. If the device does
not support returning the WEP key or the user is not root then the key may
be returned as all zeros. This request is deprecated in favor of
IEEE80211_IOC_WPAKEY. IEEE80211_IOC_WEPTXKEY- Return the number of the WEP key used for transmission in i_val.
IEEE80211_IOC_WME- Return whether 802.11e/WME/WMM support is enabled in i_val. This value will be non-zero when support is enabled and otherwise zero.
IEEE80211_IOC_WME_CWMIN- Return the WME CWmin setting (log2) for the specified
Access Class (AC) in i_val. The AC is
passed in through i_len together with an
optional IEEE80211_WMEPARAM_BSS flag to indicate if the parameter for the
BSS or the channel is desired. If WME is not supported then
EINVALwill be returned. IEEE80211_IOC_WME_CWMAX- Return the WME CWmax setting (log2) for the specified
Access Class (AC) in i_val. See
IEEE80211_IOC_WME_CWMINabove for more details. IEEE80211_IOC_WME_AIFS- Return the WME AIFS setting for the specified Access Class
(AC) in i_val. See
IEEE80211_IOC_WME_CWMINabove for more details. IEEE80211_IOC_WME_TXOPLIMIT- Return the WME TxOpLimit (msec) for the specified Access
Class (AC) in i_val. See
IEEE80211_IOC_WME_CWMINabove for more details. IEEE80211_IOC_WME_ACM- Return the WME Admission Control Mechanism (ACM) setting
for the specified Access Class (AC) in
i_val. This value is meaningful only for
the BSS (not channel). See
IEEE80211_IOC_WME_CWMINabove for more details. IEEE80211_IOC_WME_ACKPOLICY- Return the WME ACK Policy setting for the specified Access
Class (AC) in i_val. When this value is
zero frames will be transmitted without waiting for an Acknowledgement.
This value is meaningful only for the channel (not BSS). See
IEEE80211_IOC_WME_CWMINabove for more details. IEEE80211_IOC_WPA- Return the WPA configuration in i_val. Valid values are 0 (WPA is not enabled), 1 (WPA1 is enabled), 2 (WPA2/802.11i is enabled), and 3 (WPA1 and WPA2/802.11i are both enabled).
IEEE80211_IOC_WPAIE- Return any WPA information element for an associated
station via i_data. The request passed in
through i_data identifies the MAC address
of the desired station. If an RSN (802.11i) element is present it is
returned; otherwise any WPA element is returned. Note this request is
deprecated; use
IEEE80211_IOC_WPAIE2instead. IEEE80211_IOC_WPAIE2- Return any WPA information elements for an associated station via i_data. The request passed in through i_data identifies the MAC address of the desired station. One or both of RSN (802.11i) and WPA elements may be returned.
IEEE80211_IOC_WPAKEY- Return the requested cryptographic key in the buffer pointed to by i_data. The key number is specified in i_val and may be 0-3. A key number of zero is used to retrieve a station's unicast cipher key when operating with WPA enabled. If the user is not root then the key data returned is all zeros.
IEEE80211_IOC_WPS- Return whether or not Wi-FI Protected Setup (WPS) is enabled in i_val.
SIOCS80211 the following values of
i_type are valid. Note that changing a value
on an interface that is running may cause the interface to be
‘reset’. Resets may be handled without altering the state if the
parameter does not affect the MLME state (e.g. RTS threshold), but in some
cases the interface may need to scan for a new network or clear state
(including any associated stations); in that case the interface is said to be
‘restarted’ (it is equivalent to marking the interface down and
back up). The information below identifies whether changing a value affects
the state of a running interface.
IEEE80211_IOC_ADDMAC- Add an entry to the MAC address Access Control List (ACL)
database using the value pointed to by
i_data. The
wlan_acl(4) module must be installed and
enabled or
EINVALwill be returned. IEEE80211_IOC_AMPDU- Set whether or not AMPDU is enabled for transmit and/or
receive using the value in i_val. This
request causes a running interface operating on an HT channel to be reset.
See
IEEE80211_IOC_AMPDUabove for details. IEEE80211_IOC_AMPDU_DENSITY- Set the minimum density for bursting AMPDU frames to the
value in i_val. This request causes a
running interface to be reset. See
IEEE80211_IOC_AMPDU_DENSITYabove for details. IEEE80211_IOC_AMPDU_LIMIT- Set the limit on the size of AMPDU frames to the value in
i_val. This request causes a running
interface to be reset. See
IEEE80211_IOC_AMPDU_LIMITabove for details. IEEE80211_IOC_AMSDU- Set whether or not AMSDU is enabled for transmit and/or
receive using the value in i_val. This
request causes a running interface operating on an HT channel to be reset.
See
IEEE80211_IOC_AMSDUabove for details. IEEE80211_IOC_AMSDU_LIMIT- Set the limit on the size of AMSDU frames to the value in
i_val. This request causes a running
interface to be reset. See
IEEE80211_IOC_AMSDU_LIMITabove for details. IEEE80211_IOC_APBRIDGE- Set whether AP bridging is enabled using the value in
i_val. See
IEEE80211_IOC_APBRIDGEabove for details. IEEE80211_IOC_APPIE- Set an application information element using the data
pointed to by i_data. This request causes
a running interface to be restarted if the WPA information element is
changed. See
IEEE80211_IOC_APPIEabove for details. IEEE80211_IOC_AUTHMODE- Set the current authentication mode using the value in
i_val. This request causes a running
interface to be restarted. See
IEEE80211_IOC_AUTHMODEabove for details. This request causes a running interface to be restarted. IEEE80211_IOC_BEACON_INTERVAL- Set the time between Beacon frames (in TU) to the value in i_val. This request causes a running interface to be restarted.
IEEE80211_IOC_BGSCAN- Set whether background scanning is enabled using the value in i_val.
IEEE80211_IOC_BGSCAN_IDLE- Set the minimum time (in msecs) a station must be idle before it will do a background scan to the value in i_val.
IEEE80211_IOC_BGSCAN_INTERVAL- Set the minimum time (seconds) between background scan operations to the value in i_val.
IEEE80211_IOC_BMISSTHRESHOLD- Set the number of consecutive missed Beacon frames before the system will attempt to roam to the value in i_val. This request causes a running interface to be reset.
IEEE80211_IOC_BSSID- Set the 802.11 MAC address for the desired BSS identifier according to i_data. This request causes a running interface to be restarted.
IEEE80211_IOC_BURST- Set whether or not packet bursting is enabled using the value in i_val. This request causes a running interface to be reset.
IEEE80211_IOC_CHANNEL- Set the desired/current channel to the value given by
i_val. This request causes a running
interface to immediately change to the specified channel if possible;
otherwise the interface will be restarted. Note this request is
deprecated; use
IEEE80211_IOC_CURCHANinstead. IEEE80211_IOC_CHANLIST- Set the list of available channels using the channel list
pointed to by i_data. The channel list is
a bit vector with bit N set to 1 if IEEE channel number N is available for
use. The specified channel list is checked against the set of supported
channels and any channels not supported are silently ignored. If the
intersection of the channel list and the supported channels is empty
EINVALis returned. Note the current channel may be marked invalid after installing a new channel list. This request causes a running interface to be restarted. IEEE80211_IOC_COUNTERMEASURES- Set whether TKIP Countermeasures are enabled using the
value in i_val. This request can only be
used when the authentication mode is set WPA; otherwise
EOPNOTSUPPwill be returned. IEEE80211_IOC_CURCHAN- Set the current channel using the information referenced by i_data. This request causes a running interface to immediately change to the specified channel if possible; otherwise the interface will be restarted.
IEEE80211_IOC_DELKEY- Delete the key specified by the information referenced by i_data.
IEEE80211_IOC_DELMAC- Remove an entry in the MAC address Access Control List
(ACL) database using the value pointed to by
i_data. The
wlan_acl(4) module must be installed and
enabled or
EINVALwill be returned. IEEE80211_IOC_DFS- Set whether or not Dynamic Frequency Selection (DFS) is
enabled using the value in i_val. This
request will fail with
EINVALif 802.11h support is not enabled. SeeIEEE80211_IOC_DFSabove for details. IEEE80211_IOC_DOTD- Set whether or not 802.11d support is enabled using the
value in i_val. This request causes a
running interface to be restarted. See
IEEE80211_IOC_DOTDabove for details. IEEE80211_IOC_DOTH- Return whether 802.11h support is enabled using the value
in i_val. See
IEEE80211_IOC_DOTHabove for details. IEEE80211_IOC_DROPUNENCRYPTED- Set whether unencrypted packets transmit/received should be discarded using the value in i_val.
IEEE80211_IOC_DTIM_PERIOD- Set the period (in beacon intervals) between DTIM events to the value in i_val. This request causes a running interface to be restarted.
IEEE80211_IOC_DWDS- Set whether or not Dynamic WDS support is enabled using the
value in i_val. See
IEEE80211_IOC_DWDSabove for details. IEEE80211_IOC_FF- Set whether Atheros fast-frames support is enabled using
the value in i_val. This request causes a
running interface to be restarted. See
IEEE80211_IOC_FFabove for details. IEEE80211_IOC_FRAGTHRESHOLD- Set the threshold (in bytes) for enabling fragmentation
frames using the value in i_val. This
request causes a running interface to be reset. See
IEEE80211_IOC_FRAGTHRESHOLDabove for details. IEEE80211_IOC_GREENFIELD- Set whether or not Greenfield preamble use is enabled using
the value in i_val. This request causes a
running interface to be reset. See
IEEE80211_IOC_GREENFIELDabove for details. IEEE80211_IOC_HIDESSID- Set whether SSID hiding/cloaking is enabled using the value
in i_val. This request causes a running
interface to be reset. See
IEEE80211_IOC_HIDESSIDabove for details. IEEE80211_IOC_HTCOMPAT- Set whether or not 802.11n compatibility support is enabled
using the value in i_val. This request
causes a running interface to be reset if operating on HT channel. See
IEEE80211_IOC_HTCOMPATabove for details. IEEE80211_IOC_HTCONF- Set automatic promotion of HT channels using the value in
i_val. This request causes a running
interface to be restarted. See
IEEE80211_IOC_HTCONFabove for details. IEEE80211_IOC_HTPROTMODE- Set the technique used to protect HT frames in a mixed
802.11n network using the value in i_val.
This request causes a running interface to be reset. See
IEEE80211_IOC_HTPROTMODEabove for details. IEEE80211_IOC_HWMP_MAXHOPS- Set the maximum acceptable hop count in an HWMP path according to i_val. Values must be in the range [0-255].
IEEE80211_IOC_HWMP_ROOTMODE- Set the Mesh root mode operation according to
i_val. Valid values are
IEEE80211_HWMP_ROOTMODE_DISABLED(root mode is disabled),IEEE80211_HWMP_ROOTMODE_NORMAL(send broadcast Path Request frames),IEEE80211_HWMP_ROOTMODE_PROACTIVE(send broadcast Path Request frames and force replies) andIEEE80211_HWMP_ROOTMODE_RANN(send broadcast Root Announcement (RANN) frames). IEEE80211_IOC_INACTIVITY- Set whether or not the system handles inactivity processing using the value in i_val. When inactivity processing is enabled the system will track stations that have not transmitted frames and periodically probe them to check if they are still present. Stations that are inactive and do not respond to probes are dropped.
IEEE80211_IOC_MACCMD- Change the state of the MAC address Access Control List
(ACL) system. There are several requests supported:
IEEE80211_MACCMD_POLICY_OPEN(set the current policy to disable ACL use),IEEE80211_MACCMD_POLICY_ALLOW(set the current policy to allow only addresses listed in the database),IEEE80211_MACCMD_POLICY_DENY(set the current policy to deny addresses listed in the database),IEEE80211_MACCMD_POLICY_RADUS(set the current policy to enable use of a RADIUS backend),IEEE80211_MACCMD_FLUSH(flush all addresses from the database), andIEEE80211_MACCMD_DETACH(detach the ACL subsystem, disabling it). The wlan_acl(4) module must be installed orEINVALwill be returned. IEEE80211_IOC_MESH_AP- Set whether or not Mesh AP support is enabled using i_val.
IEEE80211_IOC_MESH_FWRD- Set whether or not packet forwarding support is enabled using i_val.
IEEE80211_IOC_MESH_ID- Set the Mesh ID using the value pointed to by
i_data. A Mesh ID can be up to
IEEE80211_MESHID_LENbytes long. IEEE80211_IOC_MESH_PP_METRIC- Set the link metric protocol using the value pointed to by i_data.
IEEE80211_IOC_MESH_PP_PATH- Set the path selection protocol using the value pointed to by i_data.
IEEE80211_IOC_MESH_RTCMD- Manipulate the state of the Mesh routing tables. Several
requests are supported:
IEEE80211_MESH_RTCMD_FLUSH(flush the contents of the routing table),IEEE80211_MESH_RTCMD_ADD(add an entry for the MAC address specified in i_data and start the Peer discovery process), andIEEE80211_MESH_RTCMD_DELETE(delete the entry corresponding to the MAC address specified in i_data ). IEEE80211_IOC_MESH_TTL- Set the Mesh Time To Live (TTL) setting installed in packets transmitted by this mesh node using i_val.
IEEE80211_IOC_MLME- Explicitly control the MLME state machine for a station
using the MLME request pointed to by
i_data. There are several MLME operations
supported:
IEEE80211_MLME_ASSOC(request association to an access point),IEEE80211_MLME_DIASSOC(diassociate the specified station),IEEE80211_MLME_DEAUTH(deauthenticate the specified station),IEEE80211_MLME_AUHORIZE(mark the specified station authorized to pass data frames),IEEE80211_MLME_UNAUTHORIZE(revoke the specified station's ability to pass data frames), andIEEE80211_MLME_AUTH(request authentication to an access point). Note when this facility is used for stations operating in infrastructure mode the roaming mode should be set to manual. IEEE80211_IOC_POWERSAVE- Set the current powersaving mode to the value in
i_val. See
IEEE80211_IOC_POWERSAVEabove for valid values. This request causes a running interface to be reset. IEEE80211_IOC_POWERSAVESLEEP- Set the powersave sleep time in TU to the value in i_val. This request causes a running interface to be reset.
IEEE80211_IOC_PRIVACY- Set the current MLME setting for PRIVACY using the value in
i_val. See
IEEE80211_IOC_PRIVACYabove for details. IEEE80211_IOC_PROTMODE- Set the current 802.11g protection mode to the value in
i_val. This request causes a running
interface to be reset. See
IEEE80211_IOC_PROTMODEabove for details. This request causes a running interface to be reset. IEEE80211_IOC_PUREG- Set whether ``pure 11g'' mode is enabled using the value in
i_val. This request causes a running
interface to be restarted. See
IEEE80211_IOC_PUREGabove for details. IEEE80211_IOC_PUREN- Set whether ``pure 11n'' mode is enabled using the value in
i_val. This request causes a running
interface to be restarted. See
IEEE80211_IOC_PURENabove for details. IEEE80211_IOC_REGDOMAIN- Set the regulatory state using the data referenced by
i_data. This request can only be issued
when all interfaces cloned from the underlying physical device are marked
down; otherwise
EBUSYis returned. Note the new regulatory data may invalidate any desired channel. IEEE80211_IOC_RIFS- Set whether or not Reduced InterFrame Spacing (RIFS) is enabled using the value in i_val. This setting is meaningful only when operating with 802.11n on an HT channel. This request causes a running interface to be reset.
IEEE80211_IOC_ROAM- Set station roaming parameters using the data pointed to by i_data.
IEEE80211_IOC_ROAMING- Set the current roaming mode to the value in
i_val. See
IEEE80211_IOC_ROAMINGabove for details. IEEE80211_IOC_RTSTHRESHOLD- Set the threshold (in bytes) for enabling transmission of
RTS frames to the value in i_val. This
request causes a running interface to be reset. See
IEEE80211_IOC_RTSTHRESHOLDabove for details. IEEE80211_IOC_SCANVALID- Set the age (in seconds) that results from a scan operation will be considered valid. When scan results are no longer valid and they are needed (e.g. to roam) the system will initiate a scan operation to replenish the scan cache.
IEEE80211_IOC_SCAN_REQ- Request a scan operation using the parameters pointed to by
i_val. The underlying device must be
running or
ENXIOwill be returned. Values for sr_duration, sr_mindwell, and sr_maxdwell shorter than 1 clock tick are rounded up to a tick. If more SSID's are supplied than the system is capable of handling the extra ones are silently ignored. If a scan operation is already in progress the request will be (silently) ignored. IEEE80211_IOC_SCAN_CANCEL- Cancel any pending/active scan operation.
IEEE80211_IOC_SHORTGI- Set whether or not Short Guard Interval (SGI) is enabled using the value in i_val. Note SGI is only used when operating on an HT (802.11n) channel. This request causes a running interface to be reset.
IEEE80211_IOC_SMPS- Set the Spatial Multiplexing Power Save (SMPS) setting to
the value in i_val. This request causes a
running interface to be reset. See
IEEE80211_IOC_SMPSabove for details. IEEE80211_IOC_SSID- Set the desired SSID using the value pointed to by i_data. The string may be at most IEEE80211_NWID_LEN bytes. This request causes a running interface to be restarted.
IEEE80211_IOC_STA_STATS- Clear accumulated statistics for the specified station.
IEEE80211_IOC_STA_VLAN- Set the VLAN tag for the specified station using the information pointed to by i_data.
IEEE80211_IOC_TDMA_BINTERVAL- Set the interval between Beacon frames to the value in i_val. Values must be positive. This request causes a running interface to be reset.
IEEE80211_IOC_TDMA_SLOT- Set the current TDMA slot to the value in i_val. Values must be in the range [0-slotcnt]. Slot 0 identifies the master in the TDMA network; if it running it will immediately start sending Beacon frames.
IEEE80211_IOC_TDMA_SLOTCNT- Set the number of slots in the TDMA network to the value in i_val. This request causes a running interface to be reset.
IEEE80211_IOC_TDMA_SLOTLEN- Set the length of the TDMA slot assigned to each station in the network to the value in i_val. Slot lengths must be in the range 200 usecs to 1024 milliseconds (though values outside the range 1-200ms are unlikely to work well). This request causes a running interface to be reset.
IEEE80211_IOC_TSN- Set whether or not Transitional Security Network (TSN) is enabled using the value in i_val.
IEEE80211_IOC_TURBOP- Set whether Atheros Dynamic Turbo mode is enabled using the value in i_val. This request causes a running interface to be restarted.
IEEE80211_IOC_TXPARAMS- Set transmit parameters using the data pointed to be i_data. This request causes a running interface to be restarted.
IEEE80211_IOC_TXPOWER- Set the maximum transmit power limit in .5 dBm units to the value in i_val. This request causes a running interface to be reset.
IEEE80211_IOC_WEP- Set the current WEP mode to the value in
i_val. See
IEEE80211_IOC_WEPabove for valid values. This request causes a running interface to be restarted. Note this request is deprecated; useIEEE80211_IOC_PRIVACYandIEEE80211_IOC_DROPUNENCRYPTEDinstead. IEEE80211_IOC_WEPKEY- Set the WEP key indicated by
i_val using the data pointed to by
i_data. Note this request is deprecated;
use
IEEE80211_IOC_WPAKEYinstead. IEEE80211_IOC_WEPTXKEY- Set the default transmit key used for transmission to the value in i_val.
IEEE80211_IOC_WME- Set whether or not WME/WMM support is enabled using the value in i_val. This request causes a running interface to be reset.
IEEE80211_IOC_WME_ACKPOLICY- Set the WME ACK Policy for the Access Class (AC) specified in i_len using the value in i_val.
IEEE80211_IOC_WME_ACM- Set the WME Admission Control Mechanism for the Access Class (AC) specified in i_len using the value in i_val.
IEEE80211_IOC_WME_AIFS- Set the WME AIFS parameter for the Access Class (AC) specified in i_len using the value in i_val.
IEEE80211_IOC_WME_CWMAX- Set the WME CWmax parameter for the Access Class (AC) specified in i_len using the value in i_val.
IEEE80211_IOC_WME_CWMIN- Set the WME CWmin parameter for the Access Class (AC) specified in i_len using the value in i_val.
IEEE80211_IOC_WME_TXOPLIMIT- Set the WME TxOpLimit parameter for the Access Class (AC) specified in i_len using the value in i_val.
IEEE80211_IOC_WPA- Set the WPA configuration using the value in
i_val. This request causes a running
interface to be reset. See
IEEE80211_IOC_WPAabove for details. IEEE80211_IOC_WPAKEY- Set the requested cryptographic key using data in the
buffer pointed to by i_data. See
IEEE80211_IOC_WPAKEYfor details. IEEE80211_IOC_WPS- Set whether or not Wi-FI Protected Setup (WPS) is enabled using the value in i_val.
SEE ALSO
ioctl(2), wlan(4), wlan_acl(4), wlan_xauth(4), hostapd(8), ifconfig(8), wpa_supplicant(8)| August 7, 2020 | Debian |