ng_ccatm

NAME

SYNOPSIS

DESCRIPTION

HOOKS

uniNNN

These hooks stack the ng_ccatm node on top of a UNI stack. The node expects the interface on these hooks to conform to the upper interface specified in ng_uni(4). These hooks are forced into queuing mode, so that there are no circular calls from call control to UNI and UNI back to call control. The NNN in the hook name is the decimal port number and should not be zero. The port number is a 32-bit unsigned integer.

manage

This hook should be connected to the ILMI daemon. No data is ever sent on this hook and all received data is discarded. The hook is used to send control messages along.

dump

On receipt of a NGM_CCATM_DUMP command a textual description of the current state of the node is sent out of this hook. This text is sent as one large message consisting of more than one mbuf.

struct ccatm_op { 
	uint32_t	op;	/* request code */ 
	u_char		data[];	/* optional data */ 
};

enum atmop { 
	ATMOP_RESP, 
	ATMOP_ABORT_CONNECTION, 
	ATMOP_ACCEPT_INCOMING_CALL, 
	ATMOP_ADD_PARTY, 
	ATMOP_ADD_PARTY_REJECT, 
	ATMOP_ADD_PARTY_SUCCESS, 
	ATMOP_ARRIVAL_OF_INCOMING_CALL, 
	ATMOP_CALL_RELEASE, 
	ATMOP_CONNECT_OUTGOING_CALL, 
	ATMOP_DROP_PARTY, 
	ATMOP_GET_LOCAL_PORT_INFO, 
	ATMOP_P2MP_CALL_ACTIVE, 
	ATMOP_P2P_CALL_ACTIVE, 
	ATMOP_PREPARE_INCOMING_CALL, 
	ATMOP_PREPARE_OUTGOING_CALL, 
	ATMOP_QUERY_CONNECTION_ATTRIBUTES, 
	ATMOP_REJECT_INCOMING_CALL, 
	ATMOP_SET_CONNECTION_ATTRIBUTES, 
	ATMOP_WAIT_ON_INCOMING_CALL, 
	ATMOP_SET_CONNECTION_ATTRIBUTES_X, 
	ATMOP_QUERY_CONNECTION_ATTRIBUTES_X, 
	ATMOP_QUERY_STATE 
};

ATMOP_RESP

As discussed in ng_uni(4), this is used to “synchronify” the interface. The argument is a

If the response code resp is zero, the node has accepted the user request. If something goes wrong, resp contains an error code. For requests that return data, data contains a code describing the type of data and the data itself starts immediately after the structure.

ATMOP_QUERY_CONNECTION_ATTRIBUTES_X

This is the same as ATMOP_QUERY_CONNECTION_ATTRIBUTES except that it allows to query several attributes within one request.

ATMOP_SET_CONNECTION_ATTRIBUTES_X

This is the same as ATMOP_SET_CONNECTION_ATTRIBUTES except that it allows to set several attributes within one request. The list of attributes is followed directly by the attributes in the same order as they appear in the list.

CONTROL MESSAGES

NGM_CCATM_DUMP (dump)

This causes the internal state of the node to be dumped in ASCII to the dump hook.

NGM_CCATM_STOP (stop)

This message causes all connections on that port to be aborted (not released!) and all ATM endpoints which are bound to that port to be closed. It stops processing of all messages from the UNI stack on that port UNI stack. The argument is a

NGM_CCATM_START (start)

Start processing on the port. The argument is a ngm_ccatm_port structure.

NGM_CCATM_CLEAR (clear)

This message takes a ngm_ccatm_port structure and clears all prefixes and addresses on that port. If the port number is zero, all ports are cleared.

NGM_CCATM_GET_ADDRESSES (get_addresses)

Get the list of all registered addresses on the given port. The argument is a ngm_ccatm_port structure and the result is a ngm_ccatm_get_addresses structure:

If the port field is zero in the request, all addresses on all ports are returned. If it is not zero, only the addresses on that port are reported. The number of addresses is returned in the count field.

NGM_CCATM_ADDRESS_REGISTERED (address_reg)

This message is used by ILMI to inform the ng_ccatm node that a previous address registration request was successful. This causes the node to activate that address. The argument to the message is a ngm_ccatm_address_req structure.

NGM_CCATM_ADDRESS_UNREGISTERED (address_unreg)

This message is used by ILMI to inform the ng_ccatm node that an address has been unregistered. The node clears that address from its tables. The argument is a ngm_ccatm_address_req structure.

NGM_CCATM_SET_PORT_PARAM (set_port_param)

This request sets the parameters on the given port. The argument is a

This should be used only by ILMI and when that port is stopped and the address and prefix tables of that port are empty. The num_addr field is ignored.

NGM_CCATM_GET_PORT_PARAM (get_port_param)

Retrieve the parameters of the given port. The argument is a ngm_ccatm_port and the result a ngm_ccatm_atm_port.

NGM_CCATM_GET_PORTLIST (get_portlist)

Get a list of all available ports on that node. This is returned as a

NGM_CCATM_GETSTATE (getstate)

Return the state of a port. The argument is a struct ngm_ccatm_port and the return values as a uint32_t.

NGM_CCATM_SETLOG (setlog)

This requests sets a new logging level and returns the previous one. The argument is either a uint32_t in which case it specifies the new logging level, or may be empty in which case just the old level is returned as a uint32_t.

NGM_CCATM_RESET (reset)

Reset the node. This is allowed only if the number of user hooks and connected UNI stacks is zero.

NGM_CCATM_GET_EXSTAT

Return extended status information from the node.

SEE ALSO

AUTHORS