NAME

struct nvme_st_result - Self-test Result

SYNOPSIS

struct nvme_st_result {
 
__u8 dsts;
 
__u8 seg;
 
__u8 vdi;
 
__u8 rsvd;
 
__le64 poh;
 
__le32 nsid;
 
__le64 flba;
 
__u8 sct;
 
__u8 sc;
 
__u8 vs[2];
 
};
 
 

Members

dsts
Device Self-test Status: Indicates the device self-test code and the status of the operation (see enum nvme_status_result and enum nvme_st_code).
seg
Segment Number: Iindicates the segment number where the first self-test failure occurred. If Device Self-test Status ( dsts) is not set to #NVME_ST_RESULT_KNOWN_SEG_FAIL, then this field should be ignored.
vdi
Valid Diagnostic Information: Indicates the diagnostic failure information that is reported. See enum nvme_st_valid_diag_info.
rsvd
Reserved
poh
Power On Hours (POH): Indicates the number of power-on hours at the time the device self-test operation was completed or aborted. This does not include time that the controller was powered and in a low power state condition.
nsid
Namespace Identifier (NSID): Indicates the namespace that the Failing LBA occurred on. Valid only when the NSID Valid bit (#NVME_ST_VALID_DIAG_INFO_NSID) is set in the Valid Diagnostic Information ( vdi) field.
flba
Failing LBA: indicates the LBA of the logical block that caused the test to fail. If the device encountered more than one failed logical block during the test, then this field only indicates one of those failed logical blocks. Valid only when the NSID Valid bit (#NVME_ST_VALID_DIAG_INFO_FLBA) is set in the Valid Diagnostic Information ( vdi) field.
sct
Status Code Type: This field may contain additional information related to errors or conditions. Bits 2:0 may contain additional information relating to errors or conditions that occurred during the device self-test operation represented in the same format used in the Status Code Type field of the completion queue entry (refer to enum nvme_status_field). Valid only when the NSID Valid bit (#NVME_ST_VALID_DIAG_INFO_SCT) is set in the Valid Diagnostic Information ( vdi) field.
sc
Status Code: This field may contain additional information relating to errors or conditions that occurred during the device self-test operation represented in the same format used in the Status Code field of the completion queue entry. Valid only when the SCT Valid bit (#NVME_ST_VALID_DIAG_INFO_SC) is set in the Valid Diagnostic Information ( vdi) field.
vs
Vendor Specific.