port

NAME

mem, kmem, port - system memory, kernel memory and system ports

DESCRIPTION

/dev/mem is a character device file that is an image of the main memory of the computer. It may be used, for example, to examine (and even patch) the system. Byte addresses in /dev/mem are interpreted as physical memory addresses. References to nonexistent locations cause errors to be returned. Examining and patching is likely to lead to unexpected results when read-only or write-only bits are present. Since Linux 2.6.26, and depending on the architecture, the CONFIG_STRICT_DEVMEM kernel configuration option limits the areas which can be accessed through this file. For example: on x86, RAM access is not allowed but accessing memory-mapped PCI regions is. It is typically created by:

mknod -m 660 /dev/mem c 1 1
chown root:kmem /dev/mem

The file /dev/kmem is the same as /dev/mem, except that the kernel virtual memory rather than physical memory is accessed. Since Linux 2.6.26, this file is available only if the CONFIG_DEVKMEM kernel configuration option is enabled. It is typically created by:

mknod -m 640 /dev/kmem c 1 2
chown root:kmem /dev/kmem

/dev/port is similar to /dev/mem, but the I/O ports are accessed. It is typically created by:

mknod -m 660 /dev/port c 1 4
chown root:kmem /dev/port

FILES

/dev/mem /dev/kmem /dev/port

SEE ALSO

chown(1), mknod(1), ioperm(2)