timecounters —
kernel time counters subsystem
The kernel uses several types of time-related devices, such as: real time
clocks, time counters and event timers. Real time clocks are responsible for
tracking real world time, mostly when the system is down. Time counters are
responsible for tracking purposes, when the system is running. Event timers
are responsible for generating interrupts at a specified time or periodically,
to run different time-based events. This page is about the second.
Time counters are the lowest level of time tracking in the kernel. They provide
monotonically increasing timestamps with known width and update frequency.
They can overflow, drift, etc and so in raw form can be used only in very
limited performance-critical places like the process scheduler.
More usable time is created by scaling the values read from the selected time
counter and combining it with some offset, regularly updated by
tc_windup() on
hardclock() invocation.
Different platforms provide different kinds of timer hardware. The goal of the
time counters subsystem is to provide a unified way to access that hardware.
Each driver implementing time counters registers them with the subsystem. It is
possible to see the list of present time counters, via the
kern.timecounter
sysctl(8) variable:
kern.timecounter.choice: TSC-low(-100) HPET(950) i8254(0) ACPI-fast(900) dummy(-1000000)
kern.timecounter.tc.ACPI-fast.mask: 16777215
kern.timecounter.tc.ACPI-fast.counter: 13467909
kern.timecounter.tc.ACPI-fast.frequency: 3579545
kern.timecounter.tc.ACPI-fast.quality: 900
kern.timecounter.tc.i8254.mask: 65535
kern.timecounter.tc.i8254.counter: 62692
kern.timecounter.tc.i8254.frequency: 1193182
kern.timecounter.tc.i8254.quality: 0
kern.timecounter.tc.HPET.mask: 4294967295
kern.timecounter.tc.HPET.counter: 3013495652
kern.timecounter.tc.HPET.frequency: 14318180
kern.timecounter.tc.HPET.quality: 950
kern.timecounter.tc.TSC-low.mask: 4294967295
kern.timecounter.tc.TSC-low.counter: 4067509463
kern.timecounter.tc.TSC-low.frequency: 11458556
kern.timecounter.tc.TSC-low.quality: -100
The output nodes are defined as follows:
-
kern.timecounter.tc.X.mask
- is a bitmask, defining valid counter bits,
-
kern.timecounter.tc.X.counter
- is a present counter value,
-
kern.timecounter.tc.X.frequency
- is a counter update frequency,
-
kern.timecounter.tc.X.quality
- is an integral value, defining the quality of this time
counter compared to others. A negative value means this time counter is
broken and should not be used.
The time management code of the kernel automatically switches to a
higher-quality time counter when it registers, unless the
kern.timecounter.hardware sysctl has been
used to choose a specific device.
There is no way to unregister a time counter once it has registered with the
kernel. If a dynamically loaded module contains a time counter you will not be
able to unload that module, even if the time counter it contains is not the
one currently in use.
attimer(4),
eventtimers(4),
ffclock(4),
hpet(4)