NAME
tput, reset - initialize a terminal or query terminfo databaseSYNOPSIS
tput [-Ttype] capname [parameters]DESCRIPTION
The tput utility uses the terminfo database to make the values of terminal-dependent capabilities and information available to the shell (see sh(1)), to initialize or reset the terminal, or return the long name of the requested terminal type. The result depends upon the capability's type:- string
- tput writes the string to the standard output. No trailing newline is supplied.
- integer
- tput writes the decimal value to the standard output, with a trailing newline.
- boolean
- tput simply sets the exit code ( 0 for TRUE if the terminal has the capability, 1 for FALSE if it does not), and writes nothing to the standard output.
Options
- -S
- allows more than one capability per invocation of tput. The capabilities must be passed to tput from the standard input instead of from the command line (see example). Only one capname is allowed per line. The -S option changes the meaning of the 0 and 1 boolean and string exit codes (see the EXIT CODES section).
- Because some capabilities may use string parameters rather than numbers, tput uses a table and the presence of parameters in its input to decide whether to use tparm(3X), and how to interpret the parameters.
- -Ttype
- indicates the type of terminal. Normally this option is unnecessary, because the default is taken from the environment variable TERM. If -T is specified, then the shell variables LINES and COLUMNS will also be ignored.
- -V
- reports the version of ncurses which was used in this program, and exits.
- -x
- do not attempt to clear the terminal's scrollback buffer using the extended “E3” capability.
Commands
A few commands ( init, reset and longname) are special; they are defined by the tput program. The others are the names of capabilities from the terminal database (see terminfo(5) for a list). Although init and reset resemble capability names, tput uses several capabilities to perform these special functions.- capname
- indicates the capability from the terminal database.
- If the capability is a string that takes parameters, the arguments following the capability will be used as parameters for the string.
- Most parameters are numbers. Only a few terminal capabilities require string parameters; tput uses a table to decide which to pass as strings. Normally tput uses tparm(3X) to perform the substitution. If no parameters are given for the capability, tput writes the string without performing the substitution.
- init
- If the terminal database is present and an entry for the user's terminal exists (see -Ttype, above), the following will occur:
- (1)
- first, tput retrieves the current terminal mode settings for your terminal. It does this by successively testing
- •
- the standard error,
- •
- standard output,
- •
- standard input and
- •
- ultimately “/dev/tty”
- to obtain terminal settings. Having retrieved these settings, tput remembers which file descriptor to use when updating settings.
- (2)
- if the window size cannot be obtained from the operating system, but the terminal description (or environment, e.g., LINES and COLUMNS variables specify this), update the operating system's notion of the window size.
- (3)
- the terminal modes will be updated:
- •
- any delays (e.g., newline) specified in the entry will be set in the tty driver,
- •
- tabs expansion will be turned on or off according to the specification in the entry, and
- •
- if tabs are not expanded, standard tabs will be set (every 8 spaces).
- (4)
- if present, the terminal's initialization strings will be output as detailed in the terminfo(5) section on Tabs and Initialization,
- (5)
- output is flushed.
- If an entry does not contain the information needed for any of these activities, that activity will silently be skipped.
- reset
- This is similar to init, with two differences:
- (1)
- before any other initialization, the terminal modes will be reset to a “sane” state:
- •
- set cooked and echo modes,
- •
- turn off cbreak and raw modes,
- •
- turn on newline translation and
- •
- reset any unset special characters to their default values
- (2)
- Instead of putting out initialization strings, the terminal's reset strings will be output if present ( rs1, rs2, rs3, rf). If the reset strings are not present, but initialization strings are, the initialization strings will be output.
- Otherwise, reset acts identically to init.
- longname
- If the terminal database is present and an entry for the user's terminal exists (see -Ttype above), then the long name of the terminal will be put out. The long name is the last name in the first line of the terminal's description in the terminfo database [see term(5)].
Aliases
tput handles the clear, init and reset commands specially: it allows for the possibility that it is invoked by a link with those names. If tput is invoked by a link named reset, this has the same effect as tput reset. The tset(1) utility also treats a link named reset specially. Before ncurses 6.1, the two utilities were different from each other:- •
- tset utility reset the terminal modes and special characters (not done with tput).
- •
- On the other hand, tset's repertoire of terminal capabilities for resetting the terminal was more limited, i.e., only reset_1string, reset_2string and reset_file in contrast to the tab-stops and margins which are set by this utility.
- •
- The reset program is usually an alias for tset, because of this difference with resetting terminal modes and special characters.
- •
- The tset program waits one second when resetting, in case it happens to be a hardware terminal.
- •
- The two programs write the terminal initialization strings to different streams (i.e., the standard error for tset and the standard output for tput).
- Note: although these programs write to different streams, redirecting their output to a file will capture only part of their actions. The changes to the terminal modes are not affected by redirecting the output.
Terminal Size
Besides the special commands (e.g., clear), tput treats certain terminfo capabilities specially: lines and cols. tput calls setupterm(3X) to obtain the terminal size:- •
- first, it gets the size from the terminal database (which generally is not provided for terminal emulators which do not have a fixed window size)
- •
- then it asks the operating system for the terminal's size (which generally works, unless connecting via a serial line which does not support NAWS: negotiations about window size).
- •
- finally, it inspects the environment variables LINES and COLUMNS which may override the terminal size.
EXAMPLES
- tput init
- Initialize the terminal according to the type of terminal in the environmental variable TERM. This command should be included in everyone's .profile after the environmental variable TERM has been exported, as illustrated on the profile(5) manual page.
- tput -T5620 reset
- Reset an AT&T 5620 terminal, overriding the type of terminal in the environmental variable TERM.
- tput cup 0 0
- Send the sequence to move the cursor to row 0, column 0 (the upper left corner of the screen, usually known as the “home” cursor position).
- tput clear
- Echo the clear-screen sequence for the current terminal.
- tput cols
- Print the number of columns for the current terminal.
- tput -T450 cols
- Print the number of columns for the 450 terminal.
- bold=`tput smso` offbold=`tput rmso`
- Set the shell variables bold, to begin stand-out mode sequence, and offbold, to end standout mode sequence, for the current terminal. This might be followed by a prompt: echo "${bold}Please type in your name: ${offbold}\c"
- tput hc
- Set exit code to indicate if the current terminal is a hard copy terminal.
- tput cup 23 4
- Send the sequence to move the cursor to row 23, column 4.
- tput cup
- Send the terminfo string for cursor-movement, with no parameters substituted.
- tput longname
- Print the long name from the terminfo database for the type of terminal specified in the environmental variable TERM.
tput -S <<!
> clear
> cup 10 10
> bold
> !
- This example shows tput processing several capabilities in one invocation. It clears the screen, moves the cursor to position 10, 10 and turns on bold (extra bright) mode. The list is terminated by an exclamation mark ( !) on a line by itself.
FILES
- /etc/terminfo
- compiled terminal description database
- /usr/share/tabset/*
- tab settings for some terminals, in a format appropriate to be output to the terminal (escape sequences that set margins and tabs); for more information, see the Tabs and Initialization, section of terminfo(5)
EXIT CODES
If the -S option is used, tput checks for errors from each line, and if any errors are found, will set the exit code to 4 plus the number of lines with errors. If no errors are found, the exit code is 0. No indication of which line failed can be given so exit code 1 will never appear. Exit codes 2, 3, and 4 retain their usual interpretation. If the -S option is not used, the exit code depends on the type of capname:- boolean
- a value of 0 is set for TRUE and 1 for FALSE.
- string
- a value of 0 is set if the capname is defined for this terminal type (the value of capname is returned on standard output); a value of 1 is set if capname is not defined for this terminal type (nothing is written to standard output).
- integer
- a value of 0 is always set, whether or not capname is defined for this terminal type. To determine if capname is defined for this terminal type, the user must test the value written to standard output. A value of -1 means that capname is not defined for this terminal type.
- other
- reset or init may fail to find their respective files. In that case, the exit code is set to 4 + errno.
DIAGNOSTICS
tput prints the following error messages and sets the corresponding exit codes.exit code | error message |
0 | (capname is a numeric variable that is not specified in the terminfo(5) database for this terminal type, e.g. tput -T450 lines and tput -Thp2621 xmc) |
1 | no error message is printed, see the EXIT CODES section. |
2 | usage error |
3 | unknown terminal type or no terminfo database |
4 | unknown terminfo capability capname |
>4 | error occurred in -S |
HISTORY
The tput command was begun by Bill Joy in 1980. The initial version only cleared the screen. AT&T System V provided a different tput command:- •
- SVr2 provided a rudimentary tput which checked the parameter against each predefined capability and returned the corresponding value. This version of tput did not use tparm(3X) for the capabilities which are parameterized.
- •
- SVr3 replaced that, a year later, by a more extensive program whose init and reset subcommands (more than half the program) were incorporated from the reset feature of BSD tset written by Eric Allman.
- •
- SVr4 added color initialization using the orig_colors and orig_pair capabilities in the init subcommand.
PORTABILITY
This implementation of tput differs from AT&T tput in two important areas:- •
- tput capname writes to the standard output. That need not be a regular terminal. However, the subcommands which manipulate terminal modes may not use the standard output.
- The AT&T implementation's init and reset commands use the BSD (4.1c) tset source, which manipulates terminal modes. It successively tries standard output, standard error, standard input before falling back to “/dev/tty” and finally just assumes a 1200Bd terminal. When updating terminal modes, it ignores errors.
- Until changes made after ncurses 6.0, tput did not modify terminal modes. tput now uses a similar scheme, using functions shared with tset (and ultimately based on the 4.4BSD tset). If it is not able to open a terminal, e.g., when running in cron(1), tput will return an error.
- •
- AT&T tput guesses the type of its capname operands by seeing if all of the characters are numeric, or not.
- Most implementations which provide support for capname operands use the tparm function to expand parameters in it. That function expects a mixture of numeric and string parameters, requiring tput to know which type to use.
- This implementation uses a table to determine the parameter types for the standard capname operands, and an internal library function to analyze nonstandard capname operands.
- Besides providing more reliable operation than AT&T's utility, a portability problem is introduced by this analysis: An OpenBSD developer adapted the internal library function from ncurses to port NetBSD's termcap-based tput to terminfo. That had been modified to interpret multiple commands on a line. Portable applications should not rely upon this feature; ncurses provides it to support applications written specifically for OpenBSD.
- •
- The termcap name dl corresponds to the
terminfo name dl1 (delete one line).
- •
- The termcap name ed corresponds to the
terminfo name rmdc (end delete mode).
- •
- In this implementation, clear is part of the capname support. The others ( init and longname) do not correspond to terminal capabilities.
- •
- Other implementations of tput on SVr4-based systems such as Solaris, IRIX64 and HPUX as well as others such as AIX and Tru64 provide support for capname operands.
- •
- A few platforms such as FreeBSD recognize termcap names rather than terminfo capability names in their respective tput commands. Since 2010, NetBSD's tput uses terminfo names. Before that, it (like FreeBSD) recognized termcap names.
- Beginning in 2021, FreeBSD uses the ncurses tput, configured for both terminfo (tested first) and termcap (as a fallback).
- •
- X/Open Curses Issue 7 documents tput differently, with capname and the other features used in this implementation.
- •
- That is, there are two standards for tput: POSIX (a subset) and X/Open Curses (the full implementation). POSIX documents a subset to avoid the complication of including X/Open Curses and the terminal capabilities database.
- •
- While it is certainly possible to write a tput program without using curses, none of the systems which have a curses implementation provide a tput utility which does not provide the capname feature.
- •
- It assigns exit code 4 to “invalid operand”, which may be the same as unknown capability. For instance, the source code for Solaris' xcurses uses the term “invalid” in this case.
- •
- It assigns exit code 255 to a numeric variable that is not specified in the terminfo database. That likely is a documentation error, confusing the -1 written to the standard output for an absent or cancelled numeric value versus an (unsigned) exit code.