uvscom

NAME

uvscom — USB support for SUNTAC Slipper U VS-10U serial adapters driver

SYNOPSIS

To compile this driver into the kernel, place the following lines in your kernel configuration file: Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

HARDWARE

The uvscom driver supports the following adapters:

• DDI Pocket Air H" C@rd
• DDI Pocket Air H" C@rd 64
• NTT P-in
• NTT P-in m@ster

DESCRIPTION

The uvscom driver provides support for the SUNTAC Slipper U VS-10U chip. Slipper U is a PC Card to USB converter for data communication card adapters. The device is accessed through the ucom(4) driver which makes it behave like a tty(4).

FILES

/dev/ttyU*

for callin ports

/dev/ttyU*.init

 

/dev/ttyU*.lock

corresponding callin initial-state and lock-state devices

/dev/cuaU*

for callout ports

/dev/cuaU*.init

 

/dev/cuaU*.lock

corresponding callout initial-state and lock-state devices

SEE ALSO

tty(4), ucom(4), usb(4)

HISTORY

The uvscom driver first appeared in FreeBSD and later in NetBSD 1.6. This manual page was adopted from NetBSD by Tom Rhodes <[email protected]> in April 2002.