NAME

wait, waitid, waitpid, wait3, wait4, wait6 — wait for processes to change status

LIBRARY

Standard C Library (libc, -lc)

SYNOPSIS

#include <sys/types.h>
#include <sys/wait.h>
pid_t
wait(int *status);
pid_t
waitpid(pid_t wpid, int *status, int options);
#include <signal.h>
int
waitid(idtype_t idtype, id_t id, siginfo_t *info, int options);
#include <sys/time.h>
#include <sys/resource.h>
pid_t
wait3(int *status, int options, struct rusage *rusage);
pid_t
wait4(pid_t wpid, int *status, int options, struct rusage *rusage);
pid_t
wait6(idtype_t idtype, id_t id, int *status, int options, struct __wrusage *wrusage, siginfo_t *infop);

DESCRIPTION

The wait() function suspends execution of its calling thread until status information is available for a child process or a signal is received. On return from a successful wait() call, the status area contains information about the process that reported a status change as defined below.
The wait4() and wait6() system calls provide a more general interface for programs that need to wait for specific child processes, that need resource utilization statistics accumulated by child processes, or that require options. The other wait functions are implemented using either wait4() or wait6().
The wait6() function is the most general function in this family and its distinct features are:
All of the desired process statuses to be waited on must be explicitly specified in options. The wait(), waitpid(), wait3(), and wait4() functions all implicitly wait for exited and trapped processes, but the waitid() and wait6() functions require the corresponding WEXITED and WTRAPPED flags to be explicitly specified. This allows waiting for processes which have experienced other status changes without having to also handle the exit status from terminated processes.
The wait6() function accepts a wrusage argument which points to a structure defined as: 
struct __wrusage { 
	struct rusage   wru_self; 
	struct rusage   wru_children; 
};
This allows the calling process to collect resource usage statistics from both its own child process as well as from its grand children. When no resource usage statistics are needed this pointer can be NULL.
The last argument infop must be either NULL or a pointer to a siginfo_t structure. If non-NULL, the structure is filled with the same data as for a SIGCHLD signal delivered when the process changed state.
The set of child processes to be queried is specified by the arguments idtype and id. The separate idtype and id arguments support many other types of identifiers in addition to process IDs and process group IDs.
  • If idtype is P_PID, waitid() and wait6() wait for the child process with a process ID equal to (pid_t)id.
  • If idtype is P_PGID, waitid() and wait6() wait for the child process with a process group ID equal to (pid_t)id.
  • If idtype is P_ALL, waitid() and wait6() wait for any child process and the id is ignored.
  • If idtype is P_PID or P_PGID and the id is zero, waitid() and wait6() wait for any child process in the same process group as the caller.
Non-standard identifier types supported by this implementation of waitid() and wait6() are:
P_UID
Wait for processes whose effective user ID is equal to (uid_t) id.
P_GID
Wait for processes whose effective group ID is equal to (gid_t) id.
P_SID
Wait for processes whose session ID is equal to id. If the child process started its own session, its session ID will be the same as its process ID. Otherwise the session ID of a child process will match the caller's session ID.
P_JAILID
Waits for processes within a jail whose jail identifier is equal to id.
For the waitpid() and wait4() functions, the single wpid argument specifies the set of child processes for which to wait.
  • If wpid is -1, the call waits for any child process.
  • If wpid is 0, the call waits for any child process in the process group of the caller.
  • If wpid is greater than zero, the call waits for the process with process ID wpid.
  • If wpid is less than -1, the call waits for any process whose process group ID equals the absolute value of wpid.
The status argument is defined below.
The options argument contains the bitwise OR of any of the following options.
WCONTINUED
Report the status of selected processes that have continued from a job control stop by receiving a SIGCONT signal.
WNOHANG
Do not block when there are no processes wishing to report status.
WUNTRACED
Report the status of selected processes which are stopped due to a SIGTTIN, SIGTTOU, SIGTSTP, or SIGSTOP signal.
WSTOPPED
An alias for WUNTRACED.
WTRAPPED
Report the status of selected processes which are being traced via ptrace(2) and have trapped or reached a breakpoint. This flag is implicitly set for the functions wait(), waitpid(), wait3(), and wait4().
 
For the waitid() and wait6() functions, the flag has to be explicitly included in options if status reports from trapped processes are expected.
WEXITED
Report the status of selected processes which have terminated. This flag is implicitly set for the functions wait(), waitpid(), wait3(), and wait4().
 
For the waitid() and wait6() functions, the flag has to be explicitly included in options if status reports from terminated processes are expected.
WNOWAIT
Keep the process whose status is returned in a waitable state. The process may be waited for again after this call completes.
 
For the waitid() and wait6() functions, at least one of the options WEXITED, WUNTRACED, WSTOPPED, WTRAPPED, or WCONTINUED must be specified. Otherwise there will be no events for the call to report. To avoid hanging indefinitely in such a case these functions return -1 with errno set to EINVAL.
If rusage is non-NULL, a summary of the resources used by the terminated process and all its children is returned.
If wrusage is non-NULL, separate summaries are returned for the resources used by the terminated process and the resources used by all its children.
If infop is non-NULL, a siginfo_t structure is returned with the si_signo field set to SIGCHLD and the si_pid field set to the process ID of the process reporting status. For the exited process, the si_status field of the siginfo_t structure contains the full 32 bit exit status passed to _exit(2); the status argument of other calls only returns 8 lowest bits of the exit status.
When the WNOHANG option is specified and no processes wish to report status, waitid() sets the si_signo and si_pid fields in infop to zero. Checking these fields is the only way to know if a status change was reported.
When the WNOHANG option is specified and no processes wish to report status, wait4() and wait6() return a process id of 0.
The wait() call is the same as wait4() with a wpid value of -1, with an options value of zero, and a rusage value of NULL. The waitpid() function is identical to wait4() with an rusage value of NULL. The older wait3() call is the same as wait4() with a wpid value of -1. The wait4() function is identical to wait6() with the flags WEXITED and WTRAPPED set in options and infop set to NULL.
The following macros may be used to test the current status of the process. Exactly one of the following four macros will evaluate to a non-zero (true) value:
WIFCONTINUED(status)
True if the process has not terminated, and has continued after a job control stop. This macro can be true only if the wait call specified the WCONTINUED option.
WIFEXITED(status)
True if the process terminated normally by a call to _exit(2) or exit(3).
WIFSIGNALED(status)
True if the process terminated due to receipt of a signal.
WIFSTOPPED(status)
True if the process has not terminated, but has stopped and can be restarted. This macro can be true only if the wait call specified the WUNTRACED option or if the child process is being traced (see ptrace(2)).
Depending on the values of those macros, the following macros produce the remaining status information about the child process:
WEXITSTATUS(status)
If WIFEXITED(status) is true, evaluates to the low-order 8 bits of the argument passed to _exit(2) or exit(3) by the child.
WTERMSIG(status)
If WIFSIGNALED(status) is true, evaluates to the number of the signal that caused the termination of the process.
WCOREDUMP(status)
If WIFSIGNALED(status) is true, evaluates as true if the termination of the process was accompanied by the creation of a core file containing an image of the process when the signal was received.
WSTOPSIG(status)
If WIFSTOPPED(status) is true, evaluates to the number of the signal that caused the process to stop.

NOTES

See sigaction(2) for a list of termination signals. A status of 0 indicates normal termination.
If a parent process terminates without waiting for all of its child processes to terminate, the remaining child processes are re-assigned to the reaper of the exiting process as the parent, see procctl(2) PROC_REAP_ACQUIRE. If no specific reaper was assigned, the process with ID 1, the init process, becomes the parent of the orphaned children by default.
If a signal is caught while any of the wait() calls are pending, the call may be interrupted or restarted when the signal-catching routine returns, depending on the options in effect for the signal; see discussion of SA_RESTART in sigaction(2).
The implementation queues one SIGCHLD signal for each child process whose status has changed; if wait() returns because the status of a child process is available, the pending SIGCHLD signal associated with the process ID of the child process will be discarded. Any other pending SIGCHLD signals remain pending.
If SIGCHLD is blocked and wait() returns because the status of a child process is available, the pending SIGCHLD signal will be cleared unless another status of the child process is available.

RETURN VALUES

If wait() returns due to a stopped, continued, or terminated child process, the process ID of the child is returned to the calling process. Otherwise, a value of -1 is returned and errno is set to indicate the error.
If wait6(), wait4(), wait3(), or waitpid() returns due to a stopped, continued, or terminated child process, the process ID of the child is returned to the calling process. If there are no children not previously awaited, -1 is returned with errno set to ECHILD. Otherwise, if WNOHANG is specified and there are no stopped, continued or exited children, 0 is returned. If an error is detected or a caught signal aborts the call, a value of -1 is returned and errno is set to indicate the error.
If waitid() returns because one or more processes have a state change to report, 0 is returned. If an error is detected, a value of -1 is returned and errno is set to indicate the error. If WNOHANG is specified and there are no stopped, continued or exited children, 0 is returned. The si_signo and si_pid fields of infop must be checked against zero to determine if a process reported status.
The wait() family of functions will not return a child process created with pdfork(2) unless specifically directed to do so by specifying its process ID.

ERRORS

The wait() function will fail and return immediately if:
[ECHILD]
The calling process has no existing unwaited-for child processes.
[ECHILD]
No status from the terminated child process is available because the calling process has asked the system to discard such status by ignoring the signal SIGCHLD or setting the flag SA_NOCLDWAIT for that signal.
[EFAULT]
The status or rusage argument points to an illegal address. (May not be detected before exit of a child process.)
[EINTR]
The call was interrupted by a caught signal, or the signal did not have the SA_RESTART flag set.
[EINVAL]
An invalid value was specified for options, or idtype and id do not specify a valid set of processes.

SEE ALSO

_exit(2), procctl(2), ptrace(2), sigaction(2), exit(3), siginfo(3)

STANDARDS

The wait(), waitpid(), and waitid() functions are defined by POSIX; wait6(), wait4(), and wait3() are not specified by POSIX. The WCOREDUMP() macro is an extension to the POSIX interface.
The ability to use the WNOWAIT flag with waitpid() is an extension; POSIX only permits this flag with waitid().

HISTORY

The wait() function appeared in Version 1 AT&T UNIX.

Recommended readings

Pages related to waitpid you should read also:
_exit(2) exit(3) pdfork(2) procctl(2) ptrace(2) sigaction(2) siginfo(3)

Questions & Answers

Helpful answers and articles about waitpid you may found on these sites:
Stack Overflow Server Fault Super User Unix & Linux Ask Ubuntu Network Engineering DevOps Raspberry Pi Webmasters Google Search