NAME
zshbuiltins - zsh built-in commandsSHELL BUILTIN COMMANDS
Some shell builtin commands take options as described in individual entries; these are often referred to in the list below as ` flags' to avoid confusion with shell options, which may also have an effect on the behaviour of builtin commands. In this introductory section, ` option' always has the meaning of an option to a command that should be familiar to most command line users. Typically, options are single letters preceded by a hyphen ( -). Options that take an argument accept it either immediately following the option letter or after white space, for example ` print -C3 {1..9}' or ` print -C 3 {1..9}' are equivalent. Arguments to options are not the same as arguments to the command; the documentation indicates which is which. Options that do not take an argument may be combined in a single word, for example ` print -rca -- *' and `print -r -c -a -- *' are equivalent. Some shell builtin commands also take options that begin with ` +' instead of ` -'. The list below makes clear which commands these are. Options (together with their individual arguments, if any) must appear in a group before any non-option arguments; once the first non-option argument has been found, option processing is terminated. All builtin commands other than ` echo' and precommand modifiers, even those that have no options, can be given the argument ` --' to terminate option processing. This indicates that the following words are non-option arguments, but is otherwise ignored. This is useful in cases where arguments to the command may begin with ` -'. For historical reasons, most builtin commands (including ` echo') also recognize a single ` -' in a separate word for this purpose; note that this is less standard and use of ` --' is recommended.- - simple command
- See the section `Precommand Modifiers' in zshmisc(1).
- . file [ arg ... ]
- Read commands from file and execute them in the current shell environment.
If file does not contain a slash, or if PATH_DIRS is set, the
shell looks in the components of $path to find the directory containing
file. Files in the current directory are not read unless ` .'
appears somewhere in $path. If a file named ` file.zwc'
is found, is newer than file, and is the compiled form (created with
the zcompile builtin) of file, then commands are read from that
file instead of file.
If any arguments arg are given, they become the positional parameters;
the old positional parameters are restored when the file is done
executing. However, if no arguments are given, the positional parameters
remain those of the calling context, and no restoring is done.
If file was not found the return status is 127; if file was found
but contained a syntax error the return status is 126; else the return status
is the exit status of the last command executed.
- : [ arg ... ]
- This command does nothing, although normal argument expansions is performed which may have effects on shell parameters. A zero exit status is returned.
- alias [ {+|-}gmrsL ] [ name[ =value] ... ]
- For each name with a corresponding value, define an alias with that value. A trailing space in value causes the next word to be checked for alias expansion. If the -g flag is present, define a global alias; global aliases are expanded even if they do not occur in command position:
% perldoc --help 2>&1 | grep 'built-in functions' -f Search Perl built-in functions % alias -g HG='--help 2>&1 | grep' % perldoc HG 'built-in functions' -f Search Perl built-in functions
alias -s ps='gv --'
- autoload [ {+|-}RTUXdkmrtWz ] [ -w ] [ name ... ]
- See the section `Autoloading Functions' in zshmisc(1) for full details. The fpath parameter will be searched to find the function definition when the function is first referenced.
If name consists of an absolute path, the function is defined to load
from the file given (searching as usual for dump files in the given location).
The name of the function is the basename (non-directory part) of the file. It
is normally an error if the function is not found in the given location;
however, if the option -d is given, searching for the function defaults
to $fpath. If a function is loaded by absolute path, any functions
loaded from it that are marked for autoload without an absolute path
have the load path of the parent function temporarily prepended to
$fpath.
If the option -r or -R is given, the function is searched for
immediately and the location is recorded internally for use when the function
is executed; a relative path is expanded using the value of $PWD. This
protects against a change to $fpath after the call to autoload.
With -r, if the function is not found, it is silently left unresolved
until execution; with -R, an error message is printed and command
processing aborted immediately the search fails, i.e. at the autoload
command rather than at function execution..
The flag -X may be used only inside a shell function. It causes the
calling function to be marked for autoloading and then immediately loaded and
executed, with the current array of positional parameters as arguments. This
replaces the previous definition of the function. If no function definition is
found, an error is printed and the function remains undefined and marked for
autoloading. If an argument is given, it is used as a directory (i.e. it does
not include the name of the function) in which the function is to be found;
this may be combined with the -d option to allow the function search to
default to $fpath if it is not in the given location.
The flag +X attempts to load each name as an autoloaded function,
but does not execute it. The exit status is zero (success) if the
function was not previously defined and a definition for it was found.
This does not replace any existing definition of the function. The exit
status is nonzero (failure) if the function was already defined or when no
definition was found. In the latter case the function remains undefined and
marked for autoloading. If ksh-style autoloading is enabled, the function
created will contain the contents of the file plus a call to the function
itself appended to it, thus giving normal ksh autoloading behaviour on the
first call to the function. If the -m flag is also given each
name is treated as a pattern and all functions already marked for
autoload that match the pattern are loaded.
With the -t flag, turn on execution tracing; with -T, turn on
execution tracing only for the current function, turning it off on entry to
any called functions that do not also have tracing enabled.
With the -U flag, alias expansion is suppressed when the function is
loaded.
With the -w flag, the names are taken as names of files compiled
with the zcompile builtin, and all functions defined in them are marked
for autoloading.
The flags -z and -k mark the function to be autoloaded using the
zsh or ksh style, as if the option KSH_AUTOLOAD were unset or were set,
respectively. The flags override the setting of the option at the time the
function is loaded.
Note that the autoload command makes no attempt to ensure the shell
options set during the loading or execution of the file have any particular
value. For this, the emulate command can be used:
arranges that when func is loaded the shell is in native zsh
emulation, and this emulation is also applied when func is run.
Some of the functions of autoload are also provided by functions
-u or functions -U, but autoload is a more comprehensive
interface.
emulate zsh -c 'autoload -Uz func'
- bg [ job ... ]
- job ... &
- Put each specified job in the background, or the current job if none is specified.
- bindkey
- See the section `Zle Builtins' in zshzle(1).
- break [ n ]
- Exit from an enclosing for, while, until, select or repeat loop. If an arithmetic expression n is specified, then break n levels instead of just one.
- builtin name [ args ... ]
- Executes the builtin name, with the given args.
- bye
- Same as exit.
- cap
- See the section `The zsh/cap Module' in zshmodules(1).
- cd [ -qsLP ] [ arg ]
- cd [ -qsLP ] old new
- cd [ -qsLP ] {+|-}n
- Change the current directory. In the first form, change the current directory to arg, or to the value of $HOME if arg is not specified. If arg is `-', change to the previous directory.
Otherwise, if arg begins with a slash, attempt to change to the directory
given by arg.
If arg does not begin with a slash, the behaviour depends on whether the
current directory ` .' occurs in the list of directories contained in
the shell parameter cdpath. If it does not, first attempt to change to
the directory arg under the current directory, and if that fails but
cdpath is set and contains at least one element attempt to change to
the directory arg under each component of cdpath in turn until
successful. If ` .' occurs in cdpath, then cdpath is
searched strictly in order so that ` .' is only tried at the
appropriate point.
The order of testing cdpath is modified if the option POSIX_CD is
set, as described in the documentation for the option.
If no directory is found, the option CDABLE_VARS is set, and a parameter
named arg exists whose value begins with a slash, treat its value as
the directory. In that case, the parameter is added to the named directory
hash table.
The second form of cd substitutes the string new for the string
old in the name of the current directory, and tries to change to this
new directory.
The third form of cd extracts an entry from the directory stack, and
changes to that directory. An argument of the form ` +n'
identifies a stack entry by counting from the left of the list shown by the
dirs command, starting with zero. An argument of the form `
-n' counts from the right. If the PUSHD_MINUS option is
set, the meanings of ` +' and ` -' in this context are swapped.
If the POSIX_CD option is set, this form of cd is not recognised
and will be interpreted as the first form.
If the -q (quiet) option is specified, the hook function chpwd and
the functions in the array chpwd_functions are not called. This is
useful for calls to cd that do not change the environment seen by an
interactive user.
If the -s option is specified, cd refuses to change the current
directory if the given pathname contains symlinks. If the -P option is
given or the CHASE_LINKS option is set, symbolic links are resolved to
their true values. If the -L option is given symbolic links are
retained in the directory (and not resolved) regardless of the state of the
CHASE_LINKS option.
- chdir
- Same as cd.
- clone
- See the section `The zsh/clone Module' in zshmodules(1).
- command [ -pvV ] simple command
- The simple command argument is taken as an external command instead of a function or builtin and is executed. If the POSIX_BUILTINS option is set, builtins will also be executed but certain special properties of them are suppressed. The -p flag causes a default path to be searched instead of that in $path. With the -v flag, command is similar to whence and with -V, it is equivalent to whence -v.
See also the section `Precommand Modifiers' in zshmisc(1).
- comparguments
- See the section `The zsh/computil Module' in zshmodules(1).
- compcall
- See the section `The zsh/compctl Module' in zshmodules(1).
- compctl
- See the section `The zsh/compctl Module' in zshmodules(1).
- compdescribe
- See the section `The zsh/computil Module' in zshmodules(1).
- compfiles
- See the section `The zsh/computil Module' in zshmodules(1).
- compgroups
- See the section `The zsh/computil Module' in zshmodules(1).
- compquote
- See the section `The zsh/computil Module' in zshmodules(1).
- comptags
- See the section `The zsh/computil Module' in zshmodules(1).
- comptry
- See the section `The zsh/computil Module' in zshmodules(1).
- compvalues
- See the section `The zsh/computil Module' in zshmodules(1).
- continue [ n ]
- Resume the next iteration of the enclosing for, while, until, select or repeat loop. If an arithmetic expression n is specified, break out of n-1 loops and resume at the nth enclosing loop.
- declare
- Same as typeset.
- dirs [ -c ] [ arg ... ]
- dirs [ -lpv ]
- With no arguments, print the contents of the directory stack. Directories are added to this stack with the pushd command, and removed with the cd or popd commands. If arguments are specified, load them onto the directory stack, replacing anything that was there, and push the current directory onto the stack.
- -c
- clear the directory stack.
- -l
- print directory names in full instead of using of using ~ expressions (see Dynamic and Static named directories in zshexpn(1)).
- -p
- print directory entries one per line.
- -v
- number the directories in the stack when printing.
- disable [ -afmprs ] name ...
- Temporarily disable the named hash table elements or patterns. The default is to disable builtin commands. This allows you to use an external command with the same name as a builtin command. The -a option causes disable to act on regular or global aliases. The -s option causes disable to act on suffix aliases. The -f option causes disable to act on shell functions. The -r options causes disable to act on reserved words. Without arguments all disabled hash table elements from the corresponding hash table are printed. With the -m flag the arguments are taken as patterns (which should be quoted to prevent them from undergoing filename expansion), and all hash table elements from the corresponding hash table matching these patterns are disabled. Disabled objects can be enabled with the enable command.
With the option -p, name ... refer to elements of the shell's
pattern syntax as described in the section `Filename Generation'. Certain
elements can be disabled separately, as given below.
Note that patterns not allowed by the current settings for the options
EXTENDED_GLOB, KSH_GLOB and SH_GLOB are never enabled,
regardless of the setting here. For example, if EXTENDED_GLOB is not
active, the pattern ^ is ineffective even if `disable -p
"^"' has not been issued. The list below indicates any option
settings that restrict the use of the pattern. It should be noted that setting
SH_GLOB has a wider effect than merely disabling patterns as certain
expressions, in particular those involving parentheses, are parsed
differently.
The following patterns may be disabled; all the strings need quoting on the
command line to prevent them from being interpreted immediately as patterns
and the patterns are shown below in single quotes as a reminder.
- '?'
- The pattern character ? wherever it occurs, including when preceding a parenthesis with KSH_GLOB.
- '*'
- The pattern character * wherever it occurs, including recursive globbing and when preceding a parenthesis with KSH_GLOB.
- '['
- Character classes.
- '<' (NO_SH_GLOB)
- Numeric ranges.
- '|' (NO_SH_GLOB)
- Alternation in grouped patterns, case statements, or KSH_GLOB parenthesised expressions.
- '(' (NO_SH_GLOB)
- Grouping using single parentheses. Disabling this does not disable the use of parentheses for KSH_GLOB where they are introduced by a special character, nor for glob qualifiers (use ` setopt NO_BARE_GLOB_QUAL' to disable glob qualifiers that use parentheses only).
- '~' (EXTENDED_GLOB)
- Exclusion in the form A~B.
- '^' (EXTENDED_GLOB)
- Exclusion in the form A^B.
- '#' (EXTENDED_GLOB)
- The pattern character # wherever it occurs, both for repetition of a previous pattern and for indicating globbing flags.
- '?(' (KSH_GLOB)
- The grouping form ?(...). Note this is also disabled if '?' is disabled.
- '*(' (KSH_GLOB)
- The grouping form *(...). Note this is also disabled if '*' is disabled.
- '+(' (KSH_GLOB)
- The grouping form +(...).
- '!(' (KSH_GLOB)
- The grouping form !(...).
- '@(' (KSH_GLOB)
- The grouping form @(...).
- disown [ job ... ]
- job ... &|
- job ... &!
- Remove the specified jobs from the job table; the shell will no longer report their status, and will not complain if you try to exit an interactive shell with them running or stopped. If no job is specified, disown the current job.
If the jobs are currently stopped and the AUTO_CONTINUE option is
not set, a warning is printed containing information about how to make them
running after they have been disowned. If one of the latter two forms is used,
the jobs will automatically be made running, independent of the setting
of the AUTO_CONTINUE option.
- echo [ -neE ] [ arg ... ]
- Write each arg on the standard output, with a space separating each one. If the -n flag is not present, print a newline at the end. echo recognizes the following escape sequences:
- \a
- bell character
- \b
- backspace
- \c
- suppress subsequent characters and final newline
- \e
- escape
- \f
- form feed
- \n
- linefeed (newline)
- \r
- carriage return
- \t
- horizontal tab
- \v
- vertical tab
- \\
- backslash
- \0NNN
- character code in octal
- \xNN
- character code in hexadecimal
- \uNNNN
- unicode character code in hexadecimal
- \UNNNNNNNN
- unicode character code in hexadecimal
- echotc
- See the section `The zsh/termcap Module' in zshmodules(1).
- echoti
- See the section `The zsh/terminfo Module' in zshmodules(1).
- emulate [ -lLR ] [ {zsh|sh|ksh| csh} [ flags ... ] ]
- Without any argument print current emulation mode.
With single argument set up zsh options to emulate the specified shell as much
as possible. csh will never be fully emulated. If the argument is not
one of the shells listed above, zsh will be used as a default; more
precisely, the tests performed on the argument are the same as those used to
determine the emulation at startup based on the shell name, see the section
COMPATIBILITY in zsh(1) . In addition to setting shell options, the
command also restores the pristine state of pattern enables, as if all
patterns had been enabled using enable -p.
If the emulate command occurs inside a function that has been marked for
execution tracing with functions -t then the xtrace option will
be turned on regardless of emulation mode or other options. Note that code
executed inside the function by the ., source, or eval
commands is not considered to be running directly from the function, hence
does not provoke this behaviour.
If the -R switch is given, all settable options are reset to their
default value corresponding to the specified emulation mode, except for
certain options describing the interactive environment; otherwise, only those
options likely to cause portability problems in scripts and functions are
altered. If the -L switch is given, the options LOCAL_OPTIONS,
LOCAL_PATTERNS and LOCAL_TRAPS will be set as well, causing the
effects of the emulate command and any setopt, disable -p
or enable -p, and trap commands to be local to the immediately
surrounding shell function, if any; normally these options are turned off in
all emulation modes except ksh. The -L switch is mutually
exclusive with the use of -c in flags.
If there is a single argument and the -l switch is given, the options
that would be set or unset (the latter indicated with the prefix ` no')
are listed. -l can be combined with -L or -R and the list
will be modified in the appropriate way. Note the list does not depend on the
current setting of options, i.e. it includes all options that may in principle
change, not just those that would actually change.
The flags may be any of the invocation-time flags described in the
section INVOCATION in zsh(1), except that ` -o EMACS' and `-o
VI' may not be used. Flags such as ` +r'/`+o RESTRICTED' may
be prohibited in some circumstances.
If -c arg appears in flags, arg is evaluated while
the requested emulation is temporarily in effect. In this case the emulation
mode and all options are restored to their previous values before
emulate returns. The -R switch may precede the name of the shell
to emulate; note this has a meaning distinct from including -R in
flags.
Use of -c enables `sticky' emulation mode for functions defined within
the evaluated expression: the emulation mode is associated thereafter with the
function so that whenever the function is executed the emulation (respecting
the -R switch, if present) and all options are set (and pattern
disables cleared) before entry to the function, and the state is restored
after exit. If the function is called when the sticky emulation is already in
effect, either within an ` emulate shell -c' expression
or within another function with the same sticky emulation, entry and exit from
the function do not cause options to be altered (except due to standard
processing such as the LOCAL_OPTIONS option). This also applies to
functions marked for autoload within the sticky emulation; the appropriate set
of options will be applied at the point the function is loaded as well as when
it is run.
For example:
The two functions fni and fno are defined with sticky sh
emulation. fno is then executed, causing options associated with
emulations to be set to their values in sh. fno then calls
fni; because fni is also marked for sticky sh emulation,
no option changes take place on entry to or exit from it. Hence the option
cshnullglob, turned off by sh emulation, will be turned on
within fni and remain on return to fno. On exit from fno,
the emulation mode and all options will be restored to the state they were in
before entry to the temporary emulation.
The documentation above is typically sufficient for the intended purpose of
executing code designed for other shells in a suitable environment. More
detailed rules follow.
emulate sh -c 'fni() { setopt cshnullglob; } fno() { fni; }' fno
- 1.
- The sticky emulation environment provided by `emulate shell -c' is identical to that provided by entry to a function marked for sticky emulation as a consequence of being defined in such an environment. Hence, for example, the sticky emulation is inherited by subfunctions defined within functions with sticky emulation.
- 2.
- No change of options takes place on entry to or exit from functions that are not marked for sticky emulation, other than those that would normally take place, even if those functions are called within sticky emulation.
- 3.
- No special handling is provided for functions marked for autoload nor for functions present in wordcode created by the zcompile command.
- 4.
- The presence or absence of the -R switch to emulate corresponds to different sticky emulation modes, so for example ` emulate sh -c', `emulate -R sh -c' and `emulate csh -c' are treated as three distinct sticky emulations.
- 5.
- Difference in shell options supplied in addition to the basic emulation also mean the sticky emulations are different, so for example ` emulate zsh -c' and `emulate zsh -o cbases -c' are treated as distinct sticky emulations.
- enable [ -afmprs ] name ...
- Enable the named hash table elements, presumably disabled earlier with disable. The default is to enable builtin commands. The -a option causes enable to act on regular or global aliases. The -s option causes enable to act on suffix aliases. The -f option causes enable to act on shell functions. The -r option causes enable to act on reserved words. Without arguments all enabled hash table elements from the corresponding hash table are printed. With the -m flag the arguments are taken as patterns (should be quoted) and all hash table elements from the corresponding hash table matching these patterns are enabled. Enabled objects can be disabled with the disable builtin command.
enable -p reenables patterns disabled with disable -p. Note that
it does not override globbing options; for example, ` enable -p
"~"' does not cause the pattern character ~ to be
active unless the EXTENDED_GLOB option is also set. To enable all
possible patterns (so that they may be individually disabled with disable
-p), use ` setopt EXTENDED_GLOB KSH_GLOB NO_SH_GLOB'.
- eval [ arg ... ]
- Read the arguments as input to the shell and execute the resulting command(s) in the current shell process. The return status is the same as if the commands had been executed directly by the shell; if there are no args or they contain no commands (i.e. are an empty string or whitespace) the return status is zero.
- exec [ -cl ] [ -a argv0 ] [ command [ arg ... ] ]
- Replace the current shell with command rather than forking. If command is a shell builtin command or a shell function, the shell executes it, and exits when the command is complete.
With -c clear the environment; with -l prepend - to the
argv[0] string of the command executed (to simulate a login shell);
with -a argv0 set the argv[0] string of the command
executed. See the section `Precommand Modifiers' in zshmisc(1).
If the option POSIX_BUILTINS is set, command is never interpreted
as a shell builtin command or shell function. This means further precommand
modifiers such as builtin and noglob are also not interpreted
within the shell. Hence command is always found by searching the
command path.
If command is omitted but any redirections are specified, then the
redirections will take effect in the current shell.
- exit [ n ]
- Exit the shell with the exit status specified by an arithmetic expression n; if none is specified, use the exit status from the last command executed. An EOF condition will also cause the shell to exit, unless the IGNORE_EOF option is set.
See notes at the end of the section JOBS in zshmisc(1) for some possibly
unexpected interactions of the exit command with jobs.
- export [ name[=value] ... ]
- The specified names are marked for automatic export to the environment of subsequently executed commands. Equivalent to typeset -gx. If a parameter specified does not already exist, it is created in the global scope.
- false [ arg ... ]
- Do nothing and return an exit status of 1.
- fc [ -e ename ] [ -s ] [ -LI ] [ -m match ] [ old=new ... ] [ first [ last ] ]
- fc -l [ -LI ] [ -nrdfEiD ] [ -t timefmt ] [ -m match ]
- [ old=new ... ] [ first [ last ] ]
- fc -p [ -a ] [ filename [ histsize [ savehistsize ] ] ]
- fc -P
- fc -ARWI [ filename ]
- The fc command controls the interactive history mechanism. Note that reading and writing of history options is only performed if the shell is interactive. Usually this is detected automatically, but it can be forced by setting the interactive option when starting the shell.
The first two forms of this command select a range of events from first
to last from the history list. The arguments first and
last may be specified as a number or as a string. A negative number is
used as an offset to the current history event number. A string specifies the
most recent event beginning with the given string. All substitutions
old =new, if any, are then performed on the text of the
events.
The range of events selected by numbers can be narrowed further by the following
flags.
- -I
- restricts to only internal events (not from $HISTFILE)
- -L
- restricts to only local events (not from other shells, see SHARE_HISTORY in zshoptions(1) -- note that $HISTFILE is considered local when read at startup)
- -m
- takes the first argument as a pattern (which should be quoted) and only the history events matching this pattern are considered
- -d
- prints timestamps for each event
- -f
- prints full time-date stamps in the US ` MM/DD/YY hh:mm' format
- -E
- prints full time-date stamps in the European ` dd. mm.yyyy hh:mm' format
- -i
- prints full time-date stamps in ISO8601 ` yyyy- mm-dd hh:mm' format
- -t fmt
- prints time and date stamps in the given format; fmt is formatted with the strftime function with the zsh extensions described for the %D{string} prompt format in the section EXPANSION OF PROMPT SEQUENCES in zshmisc(1). The resulting formatted string must be no more than 256 characters or will not be printed
- -D
- prints elapsed times; may be combined with one of the options above
- fg [ job ... ]
- job ...
- Bring each specified job in turn to the foreground. If no job is specified, resume the current job.
- float [ {+|-}Hghlprtux ] [ {+| -}EFLRZ [ n ] ] [ name[=value] ... ]
- Equivalent to typeset -E, except that options irrelevant to floating point numbers are not permitted.
- functions [ {+|-}UkmtTuWz ] [ -x num ] [ name ... ]
- functions -c oldfn newfn
- functions -M [-s] mathfn [ min [ max [ shellfn ] ] ]
- functions -M [ -m pattern ... ]
- functions +M [ -m ] mathfn ...
- Equivalent to typeset -f, with the exception of the -c, -x, -M and -W options. For functions -u and functions -U, see autoload, which provides additional options. For functions -t and functions -T, see typeset -f.
The -x option indicates that any functions output will have each leading
tab for indentation, added by the shell to show syntactic structure, expanded
to the given number num of spaces. num can also be 0 to suppress
all indentation.
The -W option turns on the option WARN_NESTED_VAR for the named
function or functions only. The option is turned off at the start of nested
functions (apart from anonoymous functions) unless the called function also
has the -W attribute.
The -c option causes oldfn to be copied to newfn. The copy
is efficiently handled internally by reference counting. If oldfn was
marked for autoload it is first loaded and if this fails the copy fails.
Either function may subsequently be redefined without affecting the other. A
typical idiom is that oldfn is the name of a library shell function
which is then redefined to call newfn, thereby installing a modified
version of the function.
The -M and +M flags
Use of the -M option may not be combined with any of the options handled
by typeset -f.
functions -M mathfn defines mathfn as the name of a
mathematical function recognised in all forms of arithmetical expressions; see
the section `Arithmetic Evaluation' in zshmisc(1). By default
mathfn may take any number of comma-separated arguments. If min
is given, it must have exactly min args; if min and max
are both given, it must have at least min and at most max args.
max may be -1 to indicate that there is no upper limit.
By default the function is implemented by a shell function of the same name; if
shellfn is specified it gives the name of the corresponding shell
function while mathfn remains the name used in arithmetical
expressions. The name of the function in $0 is mathfn (not
shellfn as would usually be the case), provided the option
FUNCTION_ARGZERO is in effect. The positional parameters in the shell
function correspond to the arguments of the mathematical function call.
The result of the last arithmetical expression evaluated inside the shell
function gives the result of the mathematical function. This is not limited to
arithmetic substitutions of the form $((...)), but also
includes arithmetical expressions evaluated in any other way, including by the
let builtin, by ((...)) statements, and even by
the return builtin and by array subscripts. Therefore, care must be
taken not to use syntactical constructs that perform arithmetic evaluation
after evaluating what is to be the result of the function. For example:
This will print ` 0' because of the return.
Commenting the return out would lead to a different problem: the
(( ...)) statement would become the last statement in the
function, so the return status ($?) of the function would be
non-zero (indicating failure) whenever the arithmetic result of
the function would happen to be zero (numerically):
Instead, the true builtin can be used:
If the additional option -s is given to functions -M, the argument
to the function is a single string: anything between the opening and matching
closing parenthesis is passed to the function as a single argument, even if it
includes commas or white space. The minimum and maximum argument specifiers
must therefore be 1 if given. An empty argument list is passed as a
zero-length string. Thus, the following string function takes a single
argument, including the commas, and prints 11:
functions -M with no arguments lists all such user-defined functions in
the same form as a definition. With the additional option -m and a list
of arguments, all functions whose mathfn matches one of the pattern
arguments are listed.
function +M removes the list of mathematical functions; with the
additional option -m the arguments are treated as patterns and all
functions whose mathfn matches the pattern are removed. Note that the
shell function implementing the behaviour is not removed (regardless of
whether its name coincides with mathfn).
# WRONG zmath_cube() { (( $1 * $1 * $1 )) return 0 } functions -M cube 1 1 zmath_cube print $(( cube(3) ))
# WRONG zmath_cube() { (( $1 * $1 * $1 )) } functions -M cube 1 1 zmath_cube print $(( cube(0) ))
# RIGHT zmath_cube() { (( $1 * $1 * $1 )) true } functions -M cube 1 1 zmath_cube print $(( cube(3) ))
stringfn() { (( $#1 )); true } functions -Ms stringfn print $(( stringfn(foo,bar,rod) ))
- getcap
- See the section `The zsh/cap Module' in zshmodules(1).
- getln [ -AclneE ] name ...
- Read the top value from the buffer stack and put it in the shell parameter name. Equivalent to read -zr.
- getopts optstring name [ arg ... ]
- Checks the args for legal options. If the args are omitted, use the positional parameters. A valid option argument begins with a ` +' or a `-'. An argument not beginning with a ` +' or a `-', or the argument `--', ends the options. Note that a single ` -' is not considered a valid option argument. optstring contains the letters that getopts recognizes. If a letter is followed by a ` :', that option requires an argument. The options can be separated from the argument by blanks.
Each time it is invoked, getopts places the option letter it finds in the
shell parameter name, prepended with a `+' when arg
begins with a ` +'. The index of the next arg is stored in
OPTIND. The option argument, if any, is stored in OPTARG.
The first option to be examined may be changed by explicitly assigning to
OPTIND. OPTIND has an initial value of 1, and is normally
set to 1 upon entry to a shell function and restored upon exit. (The
POSIX_BUILTINS option disables this, and also changes the way the value
is calculated to match other shells.) OPTARG is not reset and retains
its value from the most recent call to getopts. If either of
OPTIND or OPTARG is explicitly unset, it remains unset, and the
index or option argument is not stored. The option itself is still stored in
name in this case.
A leading ` :' in optstring causes getopts to store the
letter of any invalid option in OPTARG, and to set name to `
?' for an unknown option and to ` :' when a required argument is
missing. Otherwise, getopts sets name to `?' and prints
an error message when an option is invalid. The exit status is nonzero when
there are no more options.
- hash [ -Ldfmrv ] [ name[=value] ] ...
- hash can be used to directly modify the contents of the command hash table, and the named directory hash table. Normally one would modify these tables by modifying one's PATH (for the command hash table) or by creating appropriate shell parameters (for the named directory hash table). The choice of hash table to work on is determined by the -d option; without the option the command hash table is used, and with the option the named directory hash table is used.
A command name starting with a / is never hashed, whether by
explicit use of the hash command or otherwise. Such a command is always
found by direct look up in the file system.
Given no arguments, and neither the -r or -f options, the selected
hash table will be listed in full.
The -r option causes the selected hash table to be emptied. It will be
subsequently rebuilt in the normal fashion. The -f option causes the
selected hash table to be fully rebuilt immediately. For the command hash
table this hashes all the absolute directories in the PATH, and for the
named directory hash table this adds all users' home directories. These two
options cannot be used with any arguments.
The -m option causes the arguments to be taken as patterns (which should
be quoted) and the elements of the hash table matching those patterns are
printed. This is the only way to display a limited selection of hash table
elements.
For each name with a corresponding value, put `name' in the
selected hash table, associating it with the pathname ` value'. In the
command hash table, this means that whenever ` name' is used as a
command argument, the shell will try to execute the file given by `
value'. In the named directory hash table, this means that `
value' may be referred to as ` ~name'.
For each name with no corresponding value, attempt to add
name to the hash table, checking what the appropriate value is
in the normal manner for that hash table. If an appropriate value can't
be found, then the hash table will be unchanged.
The -v option causes hash table entries to be listed as they are added by
explicit specification. If has no effect if used with -f.
If the -L flag is present, then each hash table entry is printed in the
form of a call to hash.
- history
- Same as fc -l.
- integer [ {+|-}Hghlprtux ] [ {+|-}LRZi [ n ] ] [ name[=value] ... ]
- Equivalent to typeset -i, except that options irrelevant to integers are not permitted.
- jobs [ -dlprs ] [ job ... ]
- jobs -Z string
- Lists information about each given job, or all jobs if job is omitted. The -l flag lists process IDs, and the -p flag lists process groups. If the -r flag is specified only running jobs will be listed and if the -s flag is given only stopped jobs are shown. If the -d flag is given, the directory from which the job was started (which may not be the current directory of the job) will also be shown.
The -Z option replaces the shell's argument and environment space with
the given string, truncated if necessary to fit. This will normally be visible
in ps (ps(1)) listings. This feature is typically used by
daemons, to indicate their state.
Full job control is only available in the top-level interactive shell, not in
commands run in the left hand side of pipelines or within the
(... ) construct. However, a snapshot of the job state at
that point is taken, so it is still possible to use the jobs builtin,
or any parameter providing job information. This gives information about the
state of jobs at the point the subshell was created. If background processes
are created within the subshell, then instead information about those
processes is provided.
For example,
sleep 10 & # Job in background ( # Shell forks jobs # Shows information about "sleep 10 &" sleep 5 & # Process in background (no job control) jobs # Shows information about "sleep 5 &" )
- kill [ -s signal_name | -n signal_number | -sig ] job ...
- kill -l [ sig ... ]
- Sends either SIGTERM or the specified signal to the given jobs or processes. Signals are given by number or by names, with or without the ` SIG' prefix. If the signal being sent is not ` KILL' or ` CONT', then the job will be sent a ` CONT' signal if it is stopped. The argument job can be the process ID of a job not in the job list. In the second form, kill -l, if sig is not specified the signal names are listed. Otherwise, for each sig that is a name, the corresponding signal number is listed. For each sig that is a signal number or a number representing the exit status of a process which was terminated or stopped by a signal the name of the signal is printed.
On some systems, alternative signal names are allowed for a few signals. Typical
examples are SIGCHLD and SIGCLD or SIGPOLL and
SIGIO, assuming they correspond to the same signal number. kill
-l will only list the preferred form, however kill -l alt
will show if the alternative form corresponds to a signal number. For example,
under Linux kill -l IO and kill -l POLL both output 29, hence
kill -IO and kill -POLL have the same effect.
Many systems will allow process IDs to be negative to kill a process group or
zero to kill the current process group.
- let arg ...
- Evaluate each arg as an arithmetic expression. See the section `Arithmetic Evaluation' in zshmisc(1) for a description of arithmetic expressions. The exit status is 0 if the value of the last expression is nonzero, 1 if it is zero, and 2 if an error occurred.
- limit [ -hs ] [ resource [ limit ] ] ...
- Set or display resource limits. Unless the -s flag is given, the limit applies only the children of the shell. If -s is given without other arguments, the resource limits of the current shell is set to the previously set resource limits of the children.
If limit is not specified, print the current limit placed on
resource, otherwise set the limit to the specified value. If the
-h flag is given, use hard limits instead of soft limits. If no
resource is given, print all limits.
When looping over multiple resources, the shell will abort immediately if it
detects a badly formed argument. However, if it fails to set a limit for some
other reason it will continue trying to set the remaining limits.
resource can be one of:
- addressspace
- Maximum amount of address space used.
- aiomemorylocked
- Maximum amount of memory locked in RAM for AIO operations.
- aiooperations
- Maximum number of AIO operations.
- cachedthreads
- Maximum number of cached threads.
- coredumpsize
- Maximum size of a core dump.
- cputime
- Maximum CPU seconds per process.
- datasize
- Maximum data size (including stack) for each process.
- descriptors
- Maximum value for a file descriptor.
- filesize
- Largest single file allowed.
- kqueues
- Maximum number of kqueues allocated.
- maxproc
- Maximum number of processes.
- maxpthreads
- Maximum number of threads per process.
- memorylocked
- Maximum amount of memory locked in RAM.
- memoryuse
- Maximum resident set size.
- msgqueue
- Maximum number of bytes in POSIX message queues.
- posixlocks
- Maximum number of POSIX locks per user.
- pseudoterminals
- Maximum number of pseudo-terminals.
- resident
- Maximum resident set size.
- sigpending
- Maximum number of pending signals.
- sockbufsize
- Maximum size of all socket buffers.
- stacksize
- Maximum stack size for each process.
- swapsize
- Maximum amount of swap used.
- vmemorysize
- Maximum amount of virtual memory.
- nh
- hours
- nk
- kilobytes (default)
- nm
- megabytes or minutes
- ng
- gigabytes
- [mm:]ss
- minutes and seconds
- local [ {+|-}AHUahlprtux ] [ {+|-}EFLRZi [ n ] ] [ name[=value] ... ]
- Same as typeset, except that the options -g, and -f are not permitted. In this case the -x option does not force the use of -g, i.e. exported variables will be local to functions.
- logout [ n ]
- Same as exit, except that it only works in a login shell.
- noglob simple command
- See the section `Precommand Modifiers' in zshmisc(1).
- popd [ -q ] [ {+|-}n ]
- Remove an entry from the directory stack, and perform a cd to the new top directory. With no argument, the current top entry is removed. An argument of the form ` +n' identifies a stack entry by counting from the left of the list shown by the dirs command, starting with zero. An argument of the form -n counts from the right. If the PUSHD_MINUS option is set, the meanings of ` +' and ` -' in this context are swapped.
If the -q (quiet) option is specified, the hook function chpwd and
the functions in the array $chpwd_functions are not called, and the new
directory stack is not printed. This is useful for calls to popd that
do not change the environment seen by an interactive user.
- print [ -abcDilmnNoOpPrsSz ] [ -u n ] [ -f format ] [ -C cols ]
- [ -v name ] [ -xX tabstop ] [ -R [ -en ]] [ arg ... ]
- With the `-f' option the arguments are printed as described by printf. With no flags or with the flag ` -', the arguments are printed on the standard output as described by echo, with the following differences: the escape sequence ` \M- x' (or `\Mx') metafies the character x (sets the highest bit), ` \C-x' (or `\Cx') produces a control character (` \C-@' and `\C-?' give the characters NULL and delete), a character code in octal is represented by ` \NNN' (instead of ` \0NNN'), and ` \E' is a synonym for `\e'. Finally, if not in an escape sequence, ` \' escapes the following character and is not printed.
- -a
- Print arguments with the column incrementing first. Only useful with the -c and -C options.
- -b
- Recognize all the escape sequences defined for the bindkey command, see the section `Zle Builtins' in zshzle(1).
- -c
- Print the arguments in columns. Unless -a is also given, arguments are printed with the row incrementing first.
- -C cols
- Print the arguments in cols columns. Unless -a is also given, arguments are printed with the row incrementing first.
- -D
- Treat the arguments as paths, replacing directory prefixes with ~ expressions corresponding to directory names, as appropriate.
- -i
- If given together with -o or -O, sorting is performed case-independently.
- -l
- Print the arguments separated by newlines instead of spaces. Note: if the list of arguments is empty, print -l will still output one empty line. To print a possibly-empty list of arguments one per line, use print -C1, as in `print -rC1 -- "$list[@]"'.
- -m
- Take the first argument as a pattern (should be quoted), and remove it from the argument list together with subsequent arguments that do not match this pattern.
- -n
- Do not add a newline to the output.
- -N
- Print the arguments separated and terminated by nulls. Again, print -rNC1 -- "$list[@]" is a canonical way to print an arbitrary list as null-delimited records.
- -o
- Print the arguments sorted in ascending order.
- -O
- Print the arguments sorted in descending order.
- -p
- Print the arguments to the input of the coprocess.
- -P
- Perform prompt expansion (see EXPANSION OF PROMPT SEQUENCES in zshmisc(1)). In combination with ` -f', prompt escape sequences are parsed only within interpolated arguments, not within the format string.
- -r
- Ignore the escape conventions of echo.
- -R
- Emulate the BSD echo command, which does not process escape sequences unless the -e flag is given. The -n flag suppresses the trailing newline. Only the -e and -n flags are recognized after -R; all other arguments and options are printed.
- -s
- Place the results in the history list instead of on the standard output. Each argument to the print command is treated as a single word in the history, regardless of its content.
- -S
- Place the results in the history list instead of on the standard output. In this case only a single argument is allowed; it will be split into words as if it were a full shell command line. The effect is similar to reading the line from a history file with the HIST_LEX_WORDS option active.
- -u n
- Print the arguments to file descriptor n.
- -v name
- Store the printed arguments as the value of the parameter name.
- -x tab-stop
- Expand leading tabs on each line of output in the printed string assuming a tab stop every tab-stop characters. This is appropriate for formatting code that may be indented with tabs. Note that leading tabs of any argument to print, not just the first, are expanded, even if print is using spaces to separate arguments (the column count is maintained across arguments but may be incorrect on output owing to previous unexpanded tabs).
The start of the output of each print command is assumed to be aligned with a
tab stop. Widths of multibyte characters are handled if the option
MULTIBYTE is in effect. This option is ignored if other formatting
options are in effect, namely column alignment or printf style, or if
output is to a special location such as shell history or the command line
editor.
- -X tab-stop
- This is similar to -x, except that all tabs in the printed string are expanded. This is appropriate if tabs in the arguments are being used to produce a table format.
- -z
- Push the arguments onto the editing buffer stack, separated by spaces.
- printf [ -v name ] format [ arg ... ]
- Print the arguments according to the format specification. Formatting rules are the same as used in C. The same escape sequences as for echo are recognised in the format. All C conversion specifications ending in one of csdiouxXeEfgGn are handled. In addition to this, ` %b' can be used instead of ` %s' to cause escape sequences in the argument to be recognised and ` %q' can be used to quote the argument in such a way that allows it to be reused as shell input. With the numeric format specifiers, if the corresponding argument starts with a quote character, the numeric value of the following character is used as the number to print; otherwise the argument is evaluated as an arithmetic expression. See the section `Arithmetic Evaluation' in zshmisc(1) for a description of arithmetic expressions. With ` %n', the corresponding argument is taken as an identifier which is created as an integer parameter.
Normally, conversion specifications are applied to each argument in order but
they can explicitly specify the nth argument is to be used by replacing
` %' by `%n$' and `*' by
`*n$'. It is recommended that you do not mix references
of this explicit style with the normal style and the handling of such mixed
styles may be subject to future change.
If arguments remain unused after formatting, the format string is reused until
all arguments have been consumed. With the print builtin, this can be
suppressed by using the -r option. If more arguments are required by
the format than have been specified, the behaviour is as if zero or an empty
string had been specified as the argument.
The -v option causes the output to be stored as the value of the
parameter name, instead of printed. If name is an array and the
format string is reused when consuming arguments then one array element will
be used for each use of the format string.
- pushd [ -qsLP ] [ arg ]
- pushd [ -qsLP ] old new
- pushd [ -qsLP ] {+|-}n
- Change the current directory, and push the old current directory onto the directory stack. In the first form, change the current directory to arg. If arg is not specified, change to the second directory on the stack (that is, exchange the top two entries), or change to $HOME if the PUSHD_TO_HOME option is set or if there is only one entry on the stack. Otherwise, arg is interpreted as it would be by cd. The meaning of old and new in the second form is also the same as for cd.
The third form of pushd changes directory by rotating the directory list.
An argument of the form ` +n' identifies a stack entry by
counting from the left of the list shown by the dirs command, starting
with zero. An argument of the form ` -n' counts from the right.
If the PUSHD_MINUS option is set, the meanings of ` +' and
`-' in this context are swapped.
If the -q (quiet) option is specified, the hook function chpwd and
the functions in the array $chpwd_functions are not called, and the new
directory stack is not printed. This is useful for calls to pushd that
do not change the environment seen by an interactive user.
If the option -q is not specified and the shell option
PUSHD_SILENT is not set, the directory stack will be printed after a
pushd is performed.
The options -s, -L and -P have the same meanings as for the
cd builtin.
- pushln [ arg ... ]
- Equivalent to print -nz.
- pwd [ -rLP ]
- Print the absolute pathname of the current working directory. If the -r or the -P flag is specified, or the CHASE_LINKS option is set and the -L flag is not given, the printed path will not contain symbolic links.
- r
- Same as fc -e -.
- read [ -rszpqAclneE ] [ -t [ num ] ] [ -k [ num ] ] [ -d delim ]
- [ -u n ] [ [name][?prompt] ] [ name ... ]
- Read one line and break it into fields using the characters in $IFS as separators, except as noted below. The first field is assigned to the first name, the second field to the second name, etc., with leftover fields assigned to the last name. If name is omitted then REPLY is used for scalars and reply for arrays.
- -r
- Raw mode: a `\' at the end of a line does not signify line continuation and backslashes in the line don't quote the following character and are not removed.
- -s
- Don't echo back characters if reading from the terminal.
- -q
- Read only one character from the terminal and set name to ` y' if this character was `y' or `Y' and to ` n' otherwise. With this flag set the return status is zero only if the character was ` y' or `Y'. This option may be used with a timeout (see -t); if the read times out, or encounters end of file, status 2 is returned. Input is read from the terminal unless one of -u or -p is present. This option may also be used within zle widgets.
- -k [ num ]
- Read only one (or num) characters. All are assigned to the first name, without word splitting. This flag is ignored when -q is present. Input is read from the terminal unless one of -u or -p is present. This option may also be used within zle widgets.
Note that despite the mnemonic `key' this option does read full characters,
which may consist of multiple bytes if the option MULTIBYTE is
set.
- -z
- Read one entry from the editor buffer stack and assign it to the first name, without word splitting. Text is pushed onto the stack with ` print -z' or with push-line from the line editor (see zshzle(1)). This flag is ignored when the -k or -q flags are present.
- -e
- -E
- The input read is printed (echoed) to the standard output. If the -e flag is used, no input is assigned to the parameters.
- -A
- The first name is taken as the name of an array and all words are assigned to it.
- -c
- -l
- These flags are allowed only if called inside a function used for completion (specified with the -K flag to compctl). If the -c flag is given, the words of the current command are read. If the -l flag is given, the whole line is assigned as a scalar. If both flags are present, -l is used and -c is ignored.
- -n
- Together with -c, the number of the word the cursor is on is read. With -l, the index of the character the cursor is on is read. Note that the command name is word number 1, not word 0, and that when the cursor is at the end of the line, its character index is the length of the line plus one.
- -u n
- Input is read from file descriptor n.
- -p
- Input is read from the coprocess.
- -d delim
- Input is terminated by the first character of delim instead of by newline.
- -t [ num ]
- Test if input is available before attempting to read. If num is present, it must begin with a digit and will be evaluated to give a number of seconds, which may be a floating point number; in this case the read times out if input is not available within this time. If num is not present, it is taken to be zero, so that read returns immediately if no input is available. If no input is available, return status 1 and do not set any variables. This option is not available when reading from the editor buffer with -z, when called from within completion with -c or -l, with -q which clears the input queue before reading, or within zle where other mechanisms should be used to test for input. Note that read does not attempt to alter the input processing mode. The default mode is canonical input, in which an entire line is read at a time, so usually ` read -t' will not read anything until an entire line has been typed. However, when reading from the terminal with -k input is processed one key at a time; in this case, only availability of the first character is tested, so that e.g. ` read -t -k 2' can still block on the second character. Use two instances of ` read -t -k' if this is not what is wanted.
- readonly
- Same as typeset -r. With the POSIX_BUILTINS option set, same as typeset -gr.
- rehash
- Same as hash -r.
- return [ n ]
- Causes a shell function or `.' script to return to the invoking script with the return status specified by an arithmetic expression n. For example, the following prints ` 42':
() { integer foo=40; return "foo + 2" } echo $?
- sched
- See the section `The zsh/sched Module' in zshmodules(1).
- set [ {+|-}options | {+|-}o [ option_name ] ] ... [ {+|-} A [ name ] ]
- [ arg ... ]
- Set the options for the shell and/or set the positional parameters, or declare and set an array. If the -s option is given, it causes the specified arguments to be sorted before assigning them to the positional parameters (or to the array name if -A is used). With +s sort arguments in descending order. For the meaning of the other flags, see zshoptions(1). Flags may be specified by name using the -o option. If no option name is supplied with -o, the current option states are printed: see the description of setopt below for more information on the format. With +o they are printed in a form that can be used as input to the shell.
If the -A flag is specified, name is set to an array containing
the given args; if no name is specified, all arrays are printed
together with their values.
If +A is used and name is an array, the given arguments will
replace the initial elements of that array; if no name is specified,
all arrays are printed without their values.
The behaviour of arguments after -A name or +A name
depends on whether the option KSH_ARRAYS is set. If it is not set, all
arguments following name are treated as values for the array,
regardless of their form. If the option is set, normal option processing
continues at that point; only regular arguments are treated as values for the
array. This means that
sets array to `-x -- foo' if KSH_ARRAYS is not set,
but sets the array to foo and turns on the option `-x' if it is
set.
If the -A flag is not present, but there are arguments beyond the
options, the positional parameters are set. If the option list (if any) is
terminated by ` --', and there are no further arguments, the
positional parameters will be unset.
If no arguments and no ` --' are given, then the names and values
of all parameters are printed on the standard output. If the only argument is
` +', the names of all parameters are printed.
For historical reasons, ` set -' is treated as `set +xv' and `
set - args' as `set +xv -- args' when in any other
emulation mode than zsh's native mode.
set -A array -x -- foo
- setcap
- See the section `The zsh/cap Module' in zshmodules(1).
- setopt [ {+|-}options | {+| -}o option_name ] [ -m ] [ name ... ]
- Set the options for the shell. All options specified either with flags or by name are set.
If no arguments are supplied, the names of all options currently set are
printed. The form is chosen so as to minimize the differences from the default
options for the current emulation (the default emulation being native
zsh, shown as <Z> in zshoptions(1)). Options that
are on by default for the emulation are shown with the prefix no only
if they are off, while other options are shown without the prefix no
and only if they are on. In addition to options changed from the default state
by the user, any options activated automatically by the shell (for example,
SHIN_STDIN or INTERACTIVE) will be shown in the list. The format
is further modified by the option KSH_OPTION_PRINT, however the
rationale for choosing options with or without the no prefix remains
the same in this case.
If the -m flag is given the arguments are taken as patterns (which should
be quoted to protect them from filename expansion), and all options with names
matching these patterns are set.
Note that a bad option name does not cause execution of subsequent shell code to
be aborted; this is behaviour is different from that of ` set
-o'. This is because set is regarded as a special builtin by the
POSIX standard, but setopt is not.
- shift [ -p ] [ n ] [ name ... ]
- The positional parameters ${n+1} ... are renamed to $1 ..., where n is an arithmetic expression that defaults to 1. If any names are given then the arrays with these names are shifted instead of the positional parameters.
If the option -p is given arguments are instead removed (popped) from the
end rather than the start of the array.
- source file [ arg ... ]
- Same as `.', except that the current directory is always searched and is always searched first, before directories in $path.
- stat
- See the section `The zsh/stat Module' in zshmodules(1).
- suspend [ -f ]
- Suspend the execution of the shell (send it a SIGTSTP) until it receives a SIGCONT. Unless the -f option is given, this will refuse to suspend a login shell.
- test [ arg ... ]
- [ [ arg ... ] ]
- Like the system version of test. Added for compatibility; use conditional expressions instead (see the section `Conditional Expressions'). The main differences between the conditional expression syntax and the test and [ builtins are: these commands are not handled syntactically, so for example an empty variable expansion may cause an argument to be omitted; syntax errors cause status 2 to be returned instead of a shell error; and arithmetic operators expect integer arguments rather than arithmetic expressions.
The command attempts to implement POSIX and its extensions where these are
specified. Unfortunately there are intrinsic ambiguities in the syntax; in
particular there is no distinction between test operators and strings that
resemble them. The standard attempts to resolve these for small numbers of
arguments (up to four); for five or more arguments compatibility cannot be
relied on. Users are urged wherever possible to use the ` [[' test
syntax which does not have these ambiguities.
- times
- Print the accumulated user and system times for the shell and for processes run from the shell.
- trap [ arg ] [ sig ... ]
- arg is a series of commands (usually quoted to protect it from immediate evaluation by the shell) to be read and executed when the shell receives any of the signals specified by one or more sig args. Each sig can be given as a number, or as the name of a signal either with or without the string SIG in front (e.g. 1, HUP, and SIGHUP are all the same signal).
If arg is `-', then the specified signals are reset to their
defaults, or, if no sig args are present, all traps are reset.
If arg is an empty string, then the specified signals are ignored by the
shell (and by the commands it invokes).
If arg is omitted but one or more sig args are provided (i.e. the
first argument is a valid signal number or name), the effect is the same as if
arg had been specified as `-'.
The trap command with no arguments prints a list of commands associated
with each signal.
If sig is ZERR then arg will be executed after each command
with a nonzero exit status. ERR is an alias for ZERR on systems
that have no SIGERR signal (this is the usual case).
If sig is DEBUG then arg will be executed before each
command if the option DEBUG_BEFORE_CMD is set (as it is by default),
else after each command. Here, a `command' is what is described as a `sublist'
in the shell grammar, see the section SIMPLE COMMANDS & PIPELINES in
zshmisc(1). If DEBUG_BEFORE_CMD is set various additional
features are available. First, it is possible to skip the next command by
setting the option ERR_EXIT; see the description of the ERR_EXIT
option in zshoptions(1). Also, the shell parameter ZSH_DEBUG_CMD
is set to the string corresponding to the command to be executed following the
trap. Note that this string is reconstructed from the internal format and may
not be formatted the same way as the original text. The parameter is unset
after the trap is executed.
If sig is 0 or EXIT and the trap statement is
executed inside the body of a function, then the command arg is
executed after the function completes. The value of $? at the start of
execution is the exit status of the shell or the return status of the function
exiting. If sig is 0 or EXIT and the trap
statement is not executed inside the body of a function, then the command
arg is executed when the shell terminates; the trap runs before any
zshexit hook functions.
ZERR, DEBUG, and EXIT traps are not executed inside other
traps. ZERR and DEBUG traps are kept within subshells, while
other traps are reset.
Note that traps defined with the trap builtin are slightly different from
those defined as ` TRAPNAL () { ... }', as the latter have their
own function environment (line numbers, local variables, etc.) while the
former use the environment of the command in which they were called. For
example,
will print the line number of a command executed after it has run, while
will always print the number zero.
Alternative signal names are allowed as described under kill above.
Defining a trap under either name causes any trap under an alternative name to
be removed. However, it is recommended that for consistency users stick
exclusively to one name or another.
trap 'print $LINENO' DEBUG
TRAPDEBUG() { print $LINENO; }
- true [ arg ... ]
- Do nothing and return an exit status of 0.
- ttyctl [ -fu ]
- The -f option freezes the tty (i.e. terminal or terminal emulator), and -u unfreezes it. When the tty is frozen, no changes made to the tty settings by external programs will be honored by the shell, except for changes in the size of the screen; the shell will simply reset the settings to their previous values as soon as each command exits or is suspended. Thus, stty and similar programs have no effect when the tty is frozen. Freezing the tty does not cause the current state to be remembered: instead, it causes future changes to the state to be blocked.
Without options it reports whether the terminal is frozen or not.
Note that, regardless of whether the tty is frozen or not, the shell needs to
change the settings when the line editor starts, so unfreezing the tty does
not guarantee settings made on the command line are preserved. Strings of
commands run between editing the command line will see a consistent tty state.
See also the shell variable STTY for a means of initialising the tty
before running external commands and/or freezing the tty around a single
command.
- type [ -wfpamsS ] name ...
- Equivalent to whence -v.
- typeset [ {+|-}AHUaghlmrtux ] [ { +|-}EFLRZip [ n ] ]
- [ + ] [ name[=value] ... ]
- typeset -T [ {+|-}Uglrux ] [ { +|-}LRZp [ n ] ]
- [ + | SCALAR[=value] array[=(value ...)] [ sep ] ]
- typeset -f [ {+|-}TUkmtuz ] [ + ] [ name ... ]
- Set or display attributes and values for shell parameters.
Except as noted below for control flags that change the behavior, a parameter is
created for each name that does not already refer to one. When inside a
function, a new parameter is created for every name (even those that
already exist), and is unset again when the function completes. See `Local
Parameters' in zshparam(1). The same rules apply to special shell
parameters, which retain their special attributes when made local.
For each name=value assignment, the parameter name
is set to value. If the assignment is omitted and name does
not refer to an existing parameter, a new parameter is initialized to
empty string, zero, or empty array (as appropriate), unless the shell
option TYPESET_TO_UNSET is set. When that option is set, the parameter
attributes are recorded but the parameter remains unset.
If the shell option TYPESET_SILENT is not set, for each remaining
name that refers to a parameter that is already set, the name and value
of the parameter are printed in the form of an assignment. Nothing is printed
for newly-created parameters, or when any attribute flags listed below are
given along with the name. Using ` +' instead of minus to
introduce an attribute turns it off.
If no name is present, the names and values of all parameters are
printed. In this case the attribute flags restrict the display to only those
parameters that have the specified attributes, and using ` +' rather
than ` -' to introduce the flag suppresses printing of the values of
parameters when there is no parameter name.
All forms of the command handle scalar assignment. Array assignment is possible
if any of the reserved words declare, export, float,
integer, local, readonly or typeset is matched
when the line is parsed (N.B. not when it is executed). In this case the
arguments are parsed as assignments, except that the ` +=' syntax and
the GLOB_ASSIGN option are not supported, and scalar values after
= are not split further into words, even if expanded (regardless
of the setting of the KSH_TYPESET option; this option is obsolete).
Examples of the differences between command and reserved word parsing:
The above creates a scalar parameter svar and an array parameter
avar as if the assignments had been
On the other hand:
The builtin keyword causes the above to use the standard builtin
interface to typeset in which argument parsing is performed in the same
way as for other commands. This example creates a scalar svar
containing the value two and another scalar parameter words with
no value. An array value in this case would either cause an error or be
treated as an obscure set of glob qualifiers.
Arbitrary arguments are allowed if they take the form of assignments after
command line expansion; however, these only perform scalar assignment:
The above sets the scalar parameter svar to the value val.
Parentheses around the value within var would not cause array
assignment as they will be treated as ordinary characters when $var is
substituted. Any non-trivial expansion in the name part of the assignment
causes the argument to be treated in this fashion:
The above syntax is valid, and has the expected effect of setting the three
parameters to the same value, but the command line is parsed as a set of three
normal command line arguments to typeset after expansion. Hence it is
not possible to assign to multiple arrays by this means.
Note that each interface to any of the commands may be disabled separately. For
example, ` disable -r typeset' disables the reserved word interface to
typeset, exposing the builtin interface, while ` disable
typeset' disables the builtin. Note that disabling the reserved word
interface for typeset may cause problems with the output of `
typeset -p', which assumes the reserved word interface is available in
order to restore array and associative array values.
Unlike parameter assignment statements, typeset's exit status on an
assignment that involves a command substitution does not reflect the exit
status of the command substitution. Therefore, to test for an error in a
command substitution, separate the declaration of the parameter from its
initialization:
To initialize a parameter param to a command output and mark it readonly,
use typeset -r param or readonly param after the
parameter assignment statement.
If no attribute flags are given, and either no name arguments are present
or the flag +m is used, then each parameter name printed is preceded by
a list of the attributes of that parameter ( array, association,
exported, float, integer, readonly, or
undefined for autoloaded parameters not yet loaded). If +m is
used with attribute flags, and all those flags are introduced with +,
the matching parameter names are printed but their values are not.
The following control flags change the behavior of typeset:
# Reserved word parsing typeset svar=$(echo one word) avar=(several words)
svar="one word" avar=(several words)
# Normal builtin interface builtin typeset svar=$(echo two words)
var='svar=val' typeset $var
typeset {var1,var2,var3}=name
# WRONG typeset var1=$(exit 1) || echo "Trouble with var1" # RIGHT typeset var1 && var1=$(exit 1) || echo "Trouble with var1"
- +
- If `+' appears by itself in a separate word as the last option, then the names of all parameters (functions with -f) are printed, but the values (function bodies) are not. No name arguments may appear, and it is an error for any other options to follow ` +'. The effect of ` +' is as if all attribute flags which precede it were given with a ` +' prefix. For example, `typeset -U +' is equivalent to ` typeset +U' and displays the names of all arrays having the uniqueness attribute, whereas ` typeset -f -U +' displays the names of all autoloadable functions. If + is the only option, then type information (array, readonly, etc.) is also printed for each parameter, in the same manner as ` typeset +m "*"'.
- -g
- The -g (global) means that any resulting parameter will not be restricted to local scope. Note that this does not necessarily mean that the parameter will be global, as the flag will apply to any existing parameter (even if unset) from an enclosing function. This flag does not affect the parameter after creation, hence it has no effect when listing existing parameters, nor does the flag +g have any effect except in combination with -m (see below).
- -m
- If the -m flag is given the name arguments are taken as patterns (use quoting to prevent these from being interpreted as file patterns). With no attribute flags, all parameters (or functions with the -f flag) with matching names are printed (the shell option TYPESET_SILENT is not used in this case).
If the +g flag is combined with -m, a new local parameter is
created for every matching parameter that is not already local. Otherwise
-m applies all other flags or assignments to the existing parameters.
Except when assignments are made with name=value, using
+m forces the matching parameters and their attributes to be printed,
even inside a function. Note that -m is ignored if no patterns are
given, so ` typeset -m' displays attributes but `typeset -a +m'
does not.
- -p [ n ]
- If the -p option is given, parameters and values are printed in the form of a typeset command with an assignment, regardless of other flags and options. Note that the -H flag on parameters is respected; no value will be shown for these parameters.
-p may be followed by an optional integer argument. Currently only the
value 1 is supported. In this case arrays and associative arrays are
printed with newlines between indented elements for readability.
- -T [ scalar[=value] array[ =(value ...)] [ sep ] ]
- This flag has a different meaning when used with -f; see below. Otherwise the -T option requires zero, two, or three arguments to be present. With no arguments, the list of parameters created in this fashion is shown. With two or three arguments, the first two are the name of a scalar and of an array parameter (in that order) that will be tied together in the manner of $PATH and $path. The optional third argument is a single-character separator which will be used to join the elements of the array to form the scalar; if absent, a colon is used, as with $PATH. Only the first character of the separator is significant; any remaining characters are ignored. Multibyte characters are not yet supported.
Only one of the scalar and array parameters may be assigned an initial value
(the restrictions on assignment forms described above also apply).
Both the scalar and the array may be manipulated as normal. If one is unset, the
other will automatically be unset too. There is no way of untying the
variables without unsetting them, nor of converting the type of one of them
with another typeset command; +T does not work, assigning an
array to scalar is an error, and assigning a scalar to array
sets it to be a single-element array.
Note that both ` typeset -xT ...' and `export -T ...' work, but
only the scalar will be marked for export. Setting the value using the scalar
version causes a split on all separators (which cannot be quoted). It is
possible to apply -T to two previously tied variables but with a
different separator character, in which case the variables remain joined as
before but the separator is changed.
When an existing scalar is tied to a new array, the value of the scalar is
preserved but no attribute other than export will be preserved.
Attribute flags that transform the final value ( -L, -R,
-Z, -l, -u) are only applied to the expanded value at the
point of a parameter expansion expression using ` $'. They are not
applied when a parameter is retrieved internally by the shell for any purpose.
The following attribute flags may be specified:
- -A
- The names refer to associative array parameters; see `Array Parameters' in zshparam(1).
- -L [ n ]
- Left justify and remove leading blanks from the value when the parameter is expanded. If n is nonzero, it defines the width of the field. If n is zero, the width is determined by the width of the value of the first assignment. In the case of numeric parameters, the length of the complete value assigned to the parameter is used to determine the width, not the value that would be output.
The width is the count of characters, which may be multibyte characters if the
MULTIBYTE option is in effect. Note that the screen width of the
character is not taken into account; if this is required, use padding with
parameter expansion flags ${(ml...)...} as
described in `Parameter Expansion Flags' in zshexpn(1).
When the parameter is expanded, it is filled on the right with blanks or
truncated if necessary to fit the field. Note truncation can lead to
unexpected results with numeric parameters. Leading zeros are removed if the
-Z flag is also set.
- -R [ n ]
- Similar to -L, except that right justification is used; when the parameter is expanded, the field is left filled with blanks or truncated from the end. May not be combined with the -Z flag.
- -U
- For arrays (but not for associative arrays), keep only the first occurrence of each duplicated value. This may also be set for tied parameters (see -T) or colon-separated special parameters like PATH or FIGNORE, etc. Note the flag takes effect on assignment, and the type of the variable being assigned to is determinative; for variables with shared values it is therefore recommended to set the flag for all interfaces, e.g. ` typeset -U PATH path'.
This flag has a different meaning when used with -f; see below.
- -Z [ n ]
- Specially handled if set along with the -L flag. Otherwise, similar to -R, except that leading zeros are used for padding instead of blanks if the first non-blank character is a digit. Numeric parameters are specially handled: they are always eligible for padding with zeroes, and the zeroes are inserted at an appropriate place in the output.
- -a
- The names refer to array parameters. An array parameter may be created this way, but it may be assigned to in the typeset statement only if the reserved word form of typeset is enabled (as it is by default). When displaying, both normal and associative arrays are shown.
- -f
- The names refer to functions rather than parameters. No assignments can be made, and the only other valid flags are -t, -T, -k, -u, -U and -z. The flag -t turns on execution tracing for this function; the flag -T does the same, but turns off tracing for any named (not anonymous) function called from the present one, unless that function also has the -t or -T flag. The -u and -U flags cause the function to be marked for autoloading; -U also causes alias expansion to be suppressed when the function is loaded. See the description of the ` autoload' builtin for details.
Note that the builtin functions provides the same basic capabilities as
typeset -f but gives access to a few extra options; autoload
gives further additional options for the case typeset -fu and
typeset -fU.
- -h
- Hide: only useful for special parameters (those marked `<S>' in the table in zshparam(1)), and for local parameters with the same name as a special parameter, though harmless for others. A special parameter with this attribute will not retain its special effect when made local. Thus after ` typeset -h PATH', a function containing ` typeset PATH' will create an ordinary local parameter without the usual behaviour of PATH. Alternatively, the local parameter may itself be given this attribute; hence inside a function ` typeset -h PATH' creates an ordinary local parameter and the special PATH parameter is not altered in any way. It is also possible to create a local parameter using ` typeset +h special', where the local copy of special will retain its special properties regardless of having the -h attribute. Global special parameters loaded from shell modules (currently those in zsh/mapfile and zsh/parameter) are automatically given the -h attribute to avoid name clashes.
- -H
- Hide value: specifies that typeset will not display the value of the parameter when listing parameters; the display for such parameters is always as if the ` +' flag had been given. Use of the parameter is in other respects normal, and the option does not apply if the parameter is specified by name, or by pattern with the -m option. This is on by default for the parameters in the zsh/parameter and zsh/mapfile modules. Note, however, that unlike the -h flag this is also useful for non-special parameters.
- -i [ n ]
- Use an internal integer representation. If n is nonzero it defines the output arithmetic base, otherwise it is determined by the first assignment. Bases from 2 to 36 inclusive are allowed.
- -E [ n ]
- Use an internal double-precision floating point representation. On output the variable will be converted to scientific notation. If n is nonzero it defines the number of significant figures to display; the default is ten.
- -F [ n ]
- Use an internal double-precision floating point representation. On output the variable will be converted to fixed-point decimal notation. If n is nonzero it defines the number of digits to display after the decimal point; the default is ten.
- -l
- Convert the result to lower case whenever the parameter is expanded. The value is not converted when assigned.
- -r
- The given names are marked readonly. Note that if name is a special parameter, the readonly attribute can be turned on, but cannot then be turned off.
If the POSIX_BUILTINS option is set, the readonly attribute is more
restrictive: unset variables can be marked readonly and cannot then be set;
furthermore, the readonly attribute cannot be removed from any variable.
It is still possible to change other attributes of the variable though, some of
which like -U or -Z would affect the value. More generally, the
readonly attribute should not be relied on as a security mechanism.
Note that in zsh (like in pdksh but unlike most other shells) it is still
possible to create a local variable of the same name as this is considered a
different variable (though this variable, too, can be marked readonly).
Special variables that have been made readonly retain their value and readonly
attribute when made local.
- -t
- Tags the named parameters. Tags have no special meaning to the shell. This flag has a different meaning when used with -f; see above.
- -u
- Convert the result to upper case whenever the parameter is expanded. The value is not converted when assigned. This flag has a different meaning when used with -f; see above.
- -x
- Mark for automatic export to the environment of subsequently executed commands. If the option GLOBAL_EXPORT is set, this implies the option -g, unless +g is also explicitly given; in other words the parameter is not made local to the enclosing function. This is for compatibility with previous versions of zsh.
- ulimit [ -HSa ] [ { -bcdfiklmnpqrsTtvwx | -N resource } [ limit ] ... ]
- Set or display resource limits of the shell and the processes started by the shell. The value of limit can be a number in the unit specified below or one of the values ` unlimited', which removes the limit on the resource, or ` hard', which uses the current value of the hard limit on the resource.
By default, only soft limits are manipulated. If the -H flag is given use
hard limits instead of soft limits. If the -S flag is given together
with the -H flag set both hard and soft limits.
If no options are used, the file size limit ( -f) is assumed.
If limit is omitted the current value of the specified resources are
printed. When more than one resource value is printed, the limit name and unit
is printed before each value.
When looping over multiple resources, the shell will abort immediately if it
detects a badly formed argument. However, if it fails to set a limit for some
other reason it will continue trying to set the remaining limits.
Not all the following resources are supported on all systems. Running ulimit
-a will show which are supported.
- -a
- Lists all of the current resource limits.
- -b
- Socket buffer size in bytes (N.B. not kilobytes)
- -c
- 512-byte blocks on the size of core dumps.
- -d
- Kilobytes on the size of the data segment.
- -f
- 512-byte blocks on the size of files written.
- -i
- The number of pending signals.
- -k
- The number of kqueues allocated.
- -l
- Kilobytes on the size of locked-in memory.
- -m
- Kilobytes on the size of physical memory.
- -n
- open file descriptors.
- -p
- The number of pseudo-terminals.
- -q
- Bytes in POSIX message queues.
- -r
- Maximum real time priority. On some systems where this is not available, such as NetBSD, this has the same effect as -T for compatibility with sh.
- -s
- Kilobytes on the size of the stack.
- -T
- The number of simultaneous threads available to the user.
- -t
- CPU seconds to be used.
- -u
- The number of processes available to the user.
- -v
- Kilobytes on the size of virtual memory. On some systems this refers to the limit called `address space'.
- -w
- Kilobytes on the size of swapped out memory.
- -x
- The number of locks on files.
- umask [ -S ] [ mask ]
- The umask is set to mask. mask can be either an octal number or a symbolic value as described in the chmod(1) man page. If mask is omitted, the current value is printed. The -S option causes the mask to be printed as a symbolic value. Otherwise, the mask is printed as an octal number. Note that in the symbolic form the permissions you specify are those which are to be allowed (not denied) to the users specified.
- unalias [ -ams ] name ...
- Removes aliases. This command works the same as unhash -a, except that the -a option removes all regular or global aliases, or with -s all suffix aliases: in this case no name arguments may appear. The options -m (remove by pattern) and -s without -a (remove listed suffix aliases) behave as for unhash -a. Note that the meaning of -a is different between unalias and unhash.
- unfunction
- Same as unhash -f.
- unhash [ -adfms ] name ...
- Remove the element named name from an internal hash table. The default is remove elements from the command hash table. The -a option causes unhash to remove regular or global aliases; note when removing a global aliases that the argument must be quoted to prevent it from being expanded before being passed to the command. The -s option causes unhash to remove suffix aliases. The -f option causes unhash to remove shell functions. The -d options causes unhash to remove named directories. If the -m flag is given the arguments are taken as patterns (should be quoted) and all elements of the corresponding hash table with matching names will be removed.
- unlimit [ -hs ] resource ...
- The resource limit for each resource is set to the hard limit. If the -h flag is given and the shell has appropriate privileges, the hard resource limit for each resource is removed. The resources of the shell process are only changed if the -s flag is given.
The unlimit command is not made available by default when the shell
starts in a mode emulating another shell. It can be made available with the
command ` zmodload -F zsh/rlimits b:unlimit'.
- unset [ -fmv ] name ...
- Each named parameter is unset. Local parameters remain local even if unset; they appear unset within scope, but the previous value will still reappear when the scope ends.
Individual elements of associative array parameters may be unset by using
subscript syntax on name, which should be quoted (or the entire command
prefixed with noglob) to protect the subscript from filename
generation.
If the -m flag is specified the arguments are taken as patterns (should
be quoted) and all parameters with matching names are unset. Note that this
cannot be used when unsetting associative array elements, as the subscript
will be treated as part of the pattern.
The -v flag specifies that name refers to parameters. This is the
default behaviour.
unset -f is equivalent to unfunction.
- unsetopt [ {+|-}options | {+| -}o option_name ] [ name ... ]
- Unset the options for the shell. All options specified either with flags or by name are unset. If no arguments are supplied, the names of all options currently unset are printed. If the -m flag is given the arguments are taken as patterns (which should be quoted to preserve them from being interpreted as glob patterns), and all options with names matching these patterns are unset.
- vared
- See the section `Zle Builtins' in zshzle(1).
- wait [ job ... ]
- Wait for the specified jobs or processes. If job is not given then all currently active child processes are waited for. Each job can be either a job specification or the process ID of a job in the job table. The exit status from this command is that of the job waited for. If job represents an unknown job or process ID, a warning is printed (unless the POSIX_BUILTINS option is set) and the exit status is 127.
It is possible to wait for recent processes (specified by process ID, not by
job) that were running in the background even if the process has exited.
Typically the process ID will be recorded by capturing the value of the
variable $! immediately after the process has been started. There is a
limit on the number of process IDs remembered by the shell; this is given by
the value of the system configuration parameter CHILD_MAX. When this
limit is reached, older process IDs are discarded, least recently started
processes first.
Note there is no protection against the process ID wrapping, i.e. if the wait is
not executed soon enough there is a chance the process waited for is the wrong
one. A conflict implies both process IDs have been generated by the shell, as
other processes are not recorded, and that the user is potentially interested
in both, so this problem is intrinsic to process IDs.
- whence [ -vcwfpamsS ] [ -x num ] name ...
- For each name, indicate how it would be interpreted if used as a command name.
If name is not an alias, built-in command, external command, shell
function, hashed command, or a reserved word, the exit status shall be
non-zero, and -- if -v, -c, or -w was passed -- a message
will be written to standard output. (This is different from other shells that
write that message to standard error.)
whence is most useful when name is only the last path component of
a command, i.e. does not include a ` /'; in particular, pattern
matching only succeeds if just the non-directory component of the command is
passed.
- -v
- Produce a more verbose report.
- -c
- Print the results in a csh-like format. This takes precedence over -v.
- -w
- For each name, print `name: word' where word is one of alias, builtin, command, function, hashed, reserved or none, according as name corresponds to an alias, a built-in command, an external command, a shell function, a command defined with the hash builtin, a reserved word, or is not recognised. This takes precedence over -v and -c.
- -f
- Causes the contents of a shell function to be displayed, which would otherwise not happen unless the -c flag were used.
- -p
- Do a path search for name even if it is an alias, reserved word, shell function or builtin.
- -a
- Do a search for all occurrences of name throughout the command path. Normally only the first occurrence is printed.
- -m
- The arguments are taken as patterns (pattern characters should be quoted), and the information is displayed for each command matching one of these patterns.
- -s
- If a pathname contains symlinks, print the symlink-free pathname as well.
- -S
- As -s, but if the pathname had to be resolved by following multiple symlinks, the intermediate steps are printed, too. The symlink resolved at each step might be anywhere in the path.
- -x num
- Expand tabs when outputting shell functions using the -c option. This has the same effect as the -x option to the functions builtin.
- where [ -wpmsS ] [ -x num ] name ...
- Equivalent to whence -ca.
- which [ -wpamsS ] [ -x num ] name ...
- Equivalent to whence -c.
- zcompile [ -U ] [ -z | -k ] [ -R | -M ] file [ name ... ]
- zcompile -ca [ -m ] [ -R | -M ] file [ name ... ]
- zcompile -t file [ name ... ]
- This builtin command can be used to compile functions or scripts, storing the compiled form in a file, and to examine files containing the compiled form. This allows faster autoloading of functions and sourcing of scripts by avoiding parsing of the text when the files are read.
The first form (without the -c, -a or -t options) creates a
compiled file. If only the file argument is given, the output file has
the name ` file.zwc' and will be placed in the same directory as
the file. The shell will load the compiled file instead of the normal
function file when the function is autoloaded; see the section `Autoloading
Functions' in zshmisc(1) for a description of how autoloaded functions
are searched. The extension .zwc stands for `zsh word code'.
If there is at least one name argument, all the named files are compiled
into the output file given as the first argument. If file does
not end in .zwc, this extension is automatically appended. Files
containing multiple compiled functions are called `digest' files, and are
intended to be used as elements of the FPATH/fpath special
array.
The second form, with the -c or -a options, writes the compiled
definitions for all the named functions into file. For -c, the
names must be functions currently defined in the shell, not those marked for
autoloading. Undefined functions that are marked for autoloading may be
written by using the -a option, in which case the fpath is
searched and the contents of the definition files for those functions, if
found, are compiled into file. If both -c and -a are
given, names of both defined functions and functions marked for autoloading
may be given. In either case, the functions in files written with the
-c or -a option will be autoloaded as if the KSH_AUTOLOAD
option were unset.
The reason for handling loaded and not-yet-loaded functions with different
options is that some definition files for autoloading define multiple
functions, including the function with the same name as the file, and, at the
end, call that function. In such cases the output of ` zcompile -c'
does not include the additional functions defined in the file, and any other
initialization code in the file is lost. Using ` zcompile -a' captures
all this extra information.
If the -m option is combined with -c or -a, the
names are used as patterns and all functions whose names match one of
these patterns will be written. If no name is given, the definitions of
all functions currently defined or marked as autoloaded will be written.
Note the second form cannot be used for compiling functions that include
redirections as part of the definition rather than within the body of the
function; for example
can be compiled but
cannot. It is possible to use the first form of zcompile to compile
autoloadable functions that include the full function definition instead of
just the body of the function.
The third form, with the -t option, examines an existing compiled file.
Without further arguments, the names of the original files compiled into it
are listed. The first line of output shows the version of the shell which
compiled the file and how the file will be used (i.e. by reading it directly
or by mapping it into memory). With arguments, nothing is output and the
return status is set to zero if definitions for all names were
found in the compiled file, and non-zero if the definition for at least one
name was not found.
Other options:
fn1() { { ... } >~/logfile }
fn1() { ... } >~/logfile
- -U
- Aliases are not expanded when compiling the named files.
- -R
- When the compiled file is read, its contents are copied into the shell's memory, rather than memory-mapped (see -M). This happens automatically on systems that do not support memory mapping.
When compiling scripts instead of autoloadable functions, it is often desirable
to use this option; otherwise the whole file, including the code to define
functions which have already been defined, will remain mapped, consequently
wasting memory.
- -M
- The compiled file is mapped into the shell's memory when read. This is done in such a way that multiple instances of the shell running on the same host will share this mapped file. If neither -R nor -M is given, the zcompile builtin decides what to do based on the size of the compiled file.
- -k
- -z
- These options are used when the compiled file contains functions which are to be autoloaded. If -z is given, the function will be autoloaded as if the KSH_AUTOLOAD option is not set, even if it is set at the time the compiled file is read, while if the -k is given, the function will be loaded as if KSH_AUTOLOAD is set. These options also take precedence over any -k or -z options specified to the autoload builtin. If neither of these options is given, the function will be loaded as determined by the setting of the KSH_AUTOLOAD option at the time the compiled file is read. These options may also appear as many times as necessary between the listed names to specify the loading style of all following functions, up to the next -k or -z. The created file always contains two versions of the compiled format, one for big-endian machines and one for small-endian machines. The upshot of this is that the compiled file is machine independent and if it is read or mapped, only one half of the file is actually used (and mapped).
- zformat
- See the section `The zsh/zutil Module' in zshmodules(1).
- zftp
- See the section `The zsh/zftp Module' in zshmodules(1).
- zle
- See the section `Zle Builtins' in zshzle(1).
- zmodload [ -dL ] [ -s ] [ ... ]
- zmodload -F [ -alLme -P param ] module [ [+-]feature ... ]
- zmodload -e [ -A ] [ ... ]
- zmodload [ -a [ -bcpf [ -I ] ] ] [ -iL ] ...
- zmodload -u [ -abcdpf [ -I ] ] [ -iL ] ...
- zmodload -A [ -L ] [ modalias[=module] ... ]
- zmodload -R modalias ...
- Performs operations relating to zsh's loadable modules. Loading of modules while the shell is running (`dynamical loading') is not available on all operating systems, or on all installations on a particular operating system, although the zmodload command itself is always available and can be used to manipulate modules built into versions of the shell executable without dynamical loading.
Without arguments the names of all currently loaded binary modules are printed.
The -L option causes this list to be in the form of a series of
zmodload commands. Forms with arguments are:
- zmodload [ -is ] name ...
- zmodload -u [ -i ] name ...
- In the simplest case, zmodload loads a binary module. The module must be in a file with a name consisting of the specified name followed by a standard suffix, usually ` .so' (` .sl' on HPUX). If the module to be loaded is already loaded the duplicate module is ignored. If zmodload detects an inconsistency, such as an invalid module name or circular dependency list, the current code block is aborted. If it is available, the module is loaded if necessary, while if it is not available, non-zero status is silently returned. The option -i is accepted for compatibility but has no effect.
The named module is searched for in the same way a command is, using
$module_path instead of $path. However, the path search is
performed even when the module name contains a ` /', which it usually
does. There is no way to prevent the path search.
If the module supports features (see below), zmodload tries to enable all
features when loading a module. If the module was successfully loaded but not
all features could be enabled, zmodload returns status 2.
If the option -s is given, no error is printed if the module was not
available (though other errors indicating a problem with the module are
printed). The return status indicates if the module was loaded. This is
appropriate if the caller considers the module optional.
With -u, zmodload unloads modules. The same name must be
given that was given when the module was loaded, but it is not necessary for
the module to exist in the file system. The -i option suppresses the
error if the module is already unloaded (or was never loaded).
Each module has a boot and a cleanup function. The module will not be loaded if
its boot function fails. Similarly a module can only be unloaded if its
cleanup function runs successfully.
- zmodload -F [ -almLe -P param ] module [ [+-]feature ... ]
- zmodload -F allows more selective control over the features provided by modules. With no options apart from -F, the module named module is loaded, if it was not already loaded, and the list of features is set to the required state. If no features are specified, the module is loaded, if it was not already loaded, but the state of features is unchanged. Each feature may be preceded by a + to turn the feature on, or - to turn it off; the + is assumed if neither character is present. Any feature not explicitly mentioned is left in its current state; if the module was not previously loaded this means any such features will remain disabled. The return status is zero if all features were set, 1 if the module failed to load, and 2 if some features could not be set (for example, a parameter couldn't be added because there was a different parameter of the same name) but the module was loaded.
The standard features are builtins, conditions, parameters and math functions;
these are indicated by the prefix ` b:', `c:' (` C:' for
an infix condition), ` p:' and `f:', respectively, followed by
the name that the corresponding feature would have in the shell. For example,
` b:strftime' indicates a builtin named strftime and
p:EPOCHSECONDS indicates a parameter named EPOCHSECONDS. The
module may provide other (`abstract') features of its own as indicated by its
documentation; these have no prefix.
With -l or -L, features provided by the module are listed. With
-l alone, a list of features together with their states is shown, one
feature per line. With -L alone, a zmodload -F command that
would cause enabled features of the module to be turned on is shown. With
-lL, a zmodload -F command that would cause all the features to
be set to their current state is shown. If one of these combinations is given
with the option -P param then the parameter param is set
to an array of features, either features together with their state or (if
-L alone is given) enabled features.
With the option -L the module name may be omitted; then a list of all
enabled features for all modules providing features is printed in the form of
zmodload -F commands. If -l is also given, the state of both
enabled and disabled features is output in that form.
A set of features may be provided together with -l or -L and a
module name; in that case only the state of those features is considered. Each
feature may be preceded by + or - but the character has no
effect. If no set of features is provided, all features are considered.
With -e, the command first tests that the module is loaded; if it is not,
status 1 is returned. If the module is loaded, the list of features given as
an argument is examined. Any feature given with no prefix is simply tested to
see if the module provides it; any feature given with a prefix + or
- is tested to see if is provided and in the given state. If the tests
on all features in the list succeed, status 0 is returned, else status 1.
With -m, each entry in the given list of features is taken as a pattern
to be matched against the list of features provided by the module. An initial
+ or - must be given explicitly. This may not be combined with
the -a option as autoloads must be specified explicitly.
With -a, the given list of features is marked for autoload from the
specified module, which may not yet be loaded. An optional + may appear
before the feature name. If the feature is prefixed with -, any
existing autoload is removed. The options -l and -L may be used
to list autoloads. Autoloading is specific to individual features; when the
module is loaded only the requested feature is enabled. Autoload requests are
preserved if the module is subsequently unloaded until an explicit `
zmodload -Fa module -feature' is issued. It is not
an error to request an autoload for a feature of a module that is already
loaded.
When the module is loaded each autoload is checked against the features actually
provided by the module; if the feature is not provided the autoload request is
deleted. A warning message is output; if the module is being loaded to provide
a different feature, and that autoload is successful, there is no effect on
the status of the current command. If the module is already loaded at the time
when zmodload -Fa is run, an error message is printed and status 1
returned.
zmodload -Fa can be used with the -l, -L, -e and
-P options for listing and testing the existence of autoloadable
features. In this case -l is ignored if -L is specified.
zmodload -FaL with no module name lists autoloads for all modules.
Note that only standard features as described above can be autoloaded; other
features require the module to be loaded before enabling.
- zmodload -d [ -L ] [ name ]
- zmodload -d name dep ...
- zmodload -ud name [ dep ... ]
- The -d option can be used to specify module dependencies. The modules named in the second and subsequent arguments will be loaded before the module named in the first argument.
With -d and one argument, all dependencies for that module are listed.
With -d and no arguments, all module dependencies are listed. This
listing is by default in a Makefile-like format. The -L option changes
this format to a list of zmodload -d commands.
If -d and -u are both used, dependencies are removed. If only one
argument is given, all dependencies for that module are removed.
- zmodload -ab [ -L ]
- zmodload -ab [ -i ] name [ builtin ... ]
- zmodload -ub [ -i ] builtin ...
- The -ab option defines autoloaded builtins. It defines the specified builtins. When any of those builtins is called, the module specified in the first argument is loaded and all its features are enabled (for selective control of features use ` zmodload -F -a' as described above). If only the name is given, one builtin is defined, with the same name as the module. -i suppresses the error if the builtin is already defined or autoloaded, but not if another builtin of the same name is already defined.
With -ab and no arguments, all autoloaded builtins are listed, with the
module name (if different) shown in parentheses after the builtin name. The
-L option changes this format to a list of zmodload -a commands.
If -b is used together with the -u option, it removes builtins
previously defined with -ab. This is only possible if the builtin is
not yet loaded. -i suppresses the error if the builtin is already
removed (or never existed).
Autoload requests are retained if the module is subsequently unloaded until an
explicit ` zmodload -ub builtin' is issued.
- zmodload -ac [ -IL ]
- zmodload -ac [ -iI ] name [ cond ... ]
- zmodload -uc [ -iI ] cond ...
- The -ac option is used to define autoloaded condition codes. The cond strings give the names of the conditions defined by the module. The optional -I option is used to define infix condition names. Without this option prefix condition names are defined.
If given no condition names, all defined names are listed (as a series of
zmodload commands if the -L option is given).
The -uc option removes definitions for autoloaded conditions.
- zmodload -ap [ -L ]
- zmodload -ap [ -i ] name [ parameter ... ]
- zmodload -up [ -i ] parameter ...
- The -p option is like the -b and -c options, but makes zmodload work on autoloaded parameters instead.
- zmodload -af [ -L ]
- zmodload -af [ -i ] name [ function ... ]
- zmodload -uf [ -i ] function ...
- The -f option is like the -b, -p, and -c options, but makes zmodload work on autoloaded math functions instead.
- zmodload -a [ -L ]
- zmodload -a [ -i ] name [ builtin ... ]
- zmodload -ua [ -i ] builtin ...
- Equivalent to -ab and -ub.
- zmodload -e [ -A ] [ string ... ]
- The -e option without arguments lists all loaded modules; if the -A option is also given, module aliases corresponding to loaded modules are also shown. If arguments are provided, nothing is printed; the return status is set to zero if all strings given as arguments are names of loaded modules and to one if at least on string is not the name of a loaded module. This can be used to test for the availability of things implemented by modules. In this case, any aliases are automatically resolved and the -A flag is not used.
- zmodload -A [ -L ] [ modalias[=module] ... ]
- For each argument, if both modalias and module are given, define modalias to be an alias for the module module. If the module modalias is ever subsequently requested, either via a call to zmodload or implicitly, the shell will attempt to load module instead. If module is not given, show the definition of modalias. If no arguments are given, list all defined module aliases. When listing, if the -L flag was also given, list the definition as a zmodload command to recreate the alias.
The existence of aliases for modules is completely independent of whether the
name resolved is actually loaded as a module: while the alias exists, loading
and unloading the module under any alias has exactly the same effect as using
the resolved name, and does not affect the connection between the alias and
the resolved name which can be removed either by zmodload -R or by
redefining the alias. Chains of aliases (i.e. where the first resolved name is
itself an alias) are valid so long as these are not circular. As the aliases
take the same format as module names, they may include path separators: in
this case, there is no requirement for any part of the path named to exist as
the alias will be resolved first. For example, ` any/old/alias' is
always a valid alias.
Dependencies added to aliased modules are actually added to the resolved module;
these remain if the alias is removed. It is valid to create an alias whose
name is one of the standard shell modules and which resolves to a different
module. However, if a module has dependencies, it will not be possible to use
the module name as an alias as the module will already be marked as a loadable
module in its own right.
Apart from the above, aliases can be used in the zmodload command
anywhere module names are required. However, aliases will not be shown in
lists of loaded modules with a bare ` zmodload'.
- zmodload -R modalias ...
- For each modalias argument that was previously defined as a module alias via zmodload -A, delete the alias. If any was not defined, an error is caused and the remainder of the line is ignored.
- zparseopts
- See the section `The zsh/zutil Module' in zshmodules(1).
- zprof
- See the section `The zsh/zprof Module' in zshmodules(1).
- zpty
- See the section `The zsh/zpty Module' in zshmodules(1).
- zregexparse
- See the section `The zsh/zutil Module' in zshmodules(1).
- zsocket
- See the section `The zsh/net/socket Module' in zshmodules(1).
- zstyle
- See the section `The zsh/zutil Module' in zshmodules(1).
- ztcp
- See the section `The zsh/net/tcp Module' in zshmodules(1).
May 14, 2022 | zsh 5.9 |