ddjvu - Command line DjVu decoder.
ddjvu -format=fmt [options]
[djvufile] [outputfile]
Decode the DjVu file
djvufile, produces the image file
outputfile.
The DjVu data is read from the standard input when argument
djvufile is
not specified or when it is equal to a single dash. Similarly, the output data
is written to the standard output when argument
outputfile is not
specified or equal to a single dash. However a valid output file name is
always required when producing a TIFF or PDF file.
-
-format=fmt
- Specify the output file formats. The recognized file
formats are pbm, pgm, ppm, pnm, rle,
tiff, and pdf.
- *
- Formats pbm, pgm, and ppm respectively
produce a Portable Bitmap (PBM), Portable Graymap (PGM), or Portable
Pixmap (PPM) file. Format pnm produces a PBM, PGM, or PPM output
file according to the color content of the output image.
- *
- Format rle produces a compact run length encoded
bitonal file that is understood by the DjVuLibre commands cjb2 and
csepdjvu.
- *
- Format tiff produces a Tagged Image Format (TIFF)
file using lossless compression. Enabling lossy JPEG compression (see
option -quality below) often produces much smaller files. Commands
tiffcp(1) and tiffsplit(1) are useful for manipulating the
resulting TIFF files.
- *
- Format pdf produces a Portable Document Format (PDF)
file. Each page in the resulting file is represented by an image at the
specified resolution, using lossless compression. Enabling lossy JPEG
compression (see option -quality below) often produces much smaller
files. An alternate way to produce PDF file consists in first using
djvups(1) and convert the resulting PostScript file to PDF. Which
method gives better results depends on the contents of the DJVU file and
on the capabilities of the PS to PDF converter.
-
- When option -format is not specified, the extension
of argument outputfile has no influence on the default output
format. Instead the program behavior is modified to ensure backward
compatibility with previous versions of ddjvu. We recommend to
always specify the output format using this option.
-
-page=pagespec
- Specify which pages should be decoded. When this option is
not specified, all pages of the documents are decoded and concatenated
into the output file. The page specification pagespec contains one
or more comma-separated page ranges. A page range is either a page number,
or two page numbers separated by a dash. For instance, specification
1-10 outputs pages 1 to 10, and specification 1,3,99999-4
outputs pages 1 and 3, followed by all the document pages in reverse order
up to page 4.
- -eachpage
- When this option is specified, program ddjvu
generates one separate file per page named by replacing the %d
specification in outputfilename by the page number in a manner
simular to the printf(3) function.
-
-mode=mod
- Selects which layers of the DjVu image should be rendered.
Valid rendering modes are color, black, mask,
foreground, and background.
- *
- Rendering mode color is the default mode. When the
DjVu file is bitonal, bitonal or gray-level output is produced depending
on the subsampling factor. Otherwise a color image is produced.
- *
- Rendering mode black is useful to extract a
meaningful black and white image. bitonal or gray-level output is produced
depending on the subsampling factor.
- *
- Rendering modes mask, foreground, and
background select specific layers of a DjVu image. These modes can
fail if the DjVu image does not contain the selected layer.
- -skip
- Instead of aborting when encountering a corrupted page,
this option causes ddjvu to simply skip the corrupted page and
continue with the next. This is useful for processing certain damaged
files.
The following options control the resolution of the output image. The default
resolution is the native resolution of the DjVu file, equivalent to selecting
-1.
-
-n
- Specify an integer sub-sampling factor. The dimensions of
the full output image will be n times smaller than the DjVu image
size. The legal values for argument n range from 1 to 12. Option
-1, for instance, produces an output image whose resolution is
equal to the resolution of the input DjVu image file.
-
-subsample=n
- This is equivalent to option -n.
-
-scale=mag
- Specify a magnification factor relative to the resolution
stored in the DjVu image. Specifying magnification of 100 produces an
image suitable for displaying on a 100 dpi device such as a computer
screen. The magnification factor mag can also be interpreted as the
resolution of the output image expressed in dot per inch.
-
-size=wxh
- Specify the size of the full output image. Rendering the
full DjVu image would create an output image whose width and height would
not exceed w and h. To change the aspect ratio, you must
also use option -aspect=no.
-
-aspect=yesno
- This option indicates whether the image aspect ratio should
be preserved. The defaults is to preserve the aspect ration. This option
permits changes in the aspect ratio when used in combination with option
-size.
- -verbose
- Display informational messages describing the structure of
the DjVu image and the format of the output file.
-
-segment=wxh+x+y
- Specify an image segment to render. Program ddjvu
conceptually renders the full page using the specified resolution, and
then extracts a sub-image of width w and height h, starting
at position (x,y) relative to the bottom left corner
of the page. Both operations of course happen simultaneously. Rendering a
small sub-image is much faster than rendering the complete image. The
output file will always have size wxh when this option is
specified.
-
-quality=factor
- Enables lossy JPEG compression for TIFF and PDF files. This
option only affects images that cannot be encoded using the preferred
TIFF/G4 compression. Argument factor is a quantization factor
ranging from 25 to 150. See command cjpeg(1) for more information
on JPEG quantization factors. Value 80 is a good starting point.
- -quality=uncompressed
- Completely disables compression in TIFF and PDF files.
Although the resulting files are often huge, this is sometimes useful for
maximal compatibility with hastily written software.
- -quality=deflate
- Enables DEFLATE compression for TIFF files. Images that
cannot be encoded using the preferred TIFF/G4 compression will be encoded
with DEFLATE compression if available. Otherwise the more portable
PACKBITS compression is used. Specifying this option is not necessary for
PDF files because this is the default behavior.
Various options have been maintained to ensure backward compatibility with
previous versions of
ddjvu. When option
-format is not
specified, the program only decodes the first page of the document and the
default resolution becomes
-scale=100. Options
-size,
-scale,
-segment, and
-page accept an argument separated
by a space. Options
-foreground,
-background, and
-black
are shorthands for the
-mode=mod option. Please do not rely on
these features.
Command
-
-
ddjvu -format=tiff myfile.djvu
myfile.tif
decodes all pages and produces a multipage TIFF file.
Command
-
-
ddjvu -format=ppm -page=1-10 -eachpage -size=100x100
myfile.djvu thumb%03d.ppm
produces 100x100 thumbnails for the first ten page of a document and outputs
them as PPM files named
thumb001.ppm to
thumb010.ppm.
The new version of this program was written by Léon Bottou
<
[email protected]>.
This program includes code derived from program
tiff2pdf, written by Ross
Finlayson and released under a BSD license.
djvu(1),
djview(1),
pnm(5),
pbm(5),
pgm(5),
ppm(5),
cjpeg(1),
tiffsplit(1),
tiffcp(1),
printf(3)